Content Provider UncleSash Posted March 10, 2016 Content Provider Share Posted March 10, 2016 That is a DMD layout problem. There is a fix out for it in the german flippermarkt forum Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 10, 2016 Content Provider Share Posted March 10, 2016 And be sure that you have a proper ground connection! Also from the DMD to the Pin2DMD shield. I found out on my DMD, when there is an extra wire from one of the GND connections from the shield, to the GND from the PowerSupply for the DMD Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 10, 2016 Content Provider Share Posted March 10, 2016 I did't have all required files from the pin2dmd github. Working fine now except for the ghosting... Sorry for the german link..Look on post #300 The attached pictures shows the fix itself! 2K2 or 1K SMD resistor from the IC pin to ground! http://www.flippermarkt.de/community/forum/showthread.php?t=160762&page=20 -Sascha Link to comment Share on other sites More sharing options...
patzik Posted March 10, 2016 Share Posted March 10, 2016 Thanks for the info, I remember reading this post but the soldering look a bit too tiny for my liking... I'll try the grounding, I'm powering the stm32 via the micro usb, this won't be a problem? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 10, 2016 Content Provider Share Posted March 10, 2016 I do the same. But my glitching gets better after I checked the grounding and connect the shield ground to the ground from the Display. I have SMD resistor here but I don't tried it, because of the to tiny reason. Link to comment Share on other sites More sharing options...
vpu00227 Posted March 14, 2016 Share Posted March 14, 2016 Hello, I discover Pin2DMD today. Great job ! But I did not understand all, so I have some questions. For real pinball, if I want to replace the plasma DMD, do I need a computer and vp rom image to play ? To colorise the DMD, do I have to color each pictures (or keyframes) with Pin2DMD Editor ? For a single picture ,Is there more color possibility than 4 for Bally/Williams games ? In Pin2DMD Editor, how to get a dump file ? And I saw the different needs (the panel, the STM32F4, Power supply,sd card, cables...) but were can I have the Pin2DMD board ? Do you have reference example for the power supply ? Thanks Alex Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 14, 2016 Content Provider Share Posted March 14, 2016 Hey Alex. Depending on your location... Outside the EU check my Order Thread. There you find all parts and reference links in the very first post. Inside the EU, check also my Order Thread and follow the LINK to Rappelbox EU Order thread! Link to my Thread is below in my signature. Or for the most Hardware questions! Just send me a PM. I will answer it or forward you to the right person. - Sascha Link to comment Share on other sites More sharing options...
fattdirk Posted March 14, 2016 Share Posted March 14, 2016 What files do I need to put on the SD card in order to colorize the DMD on my getaway? I've loaded the latest firmware. When I power the unit I get the pin2dmd splash screen but it just sticks there. I've been searching for a few days trying to get it to work and can't find directions for this. Thanks in advance. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 14, 2016 Content Provider Share Posted March 14, 2016 What files do I need to put on the SD card in order to colorize the DMD on my getaway? I've loaded the latest firmware. When I power the unit I get the pin2dmd splash screen but it just sticks there. I've been searching for a few days trying to get it to work and can't find directions for this. Thanks in advance. You have to use your license KEY matching to the Number on the DMD under the Pin2DMD logo. When you don't have a valid KEY file, contact Lucky1. -Sascha Link to comment Share on other sites More sharing options...
fattdirk Posted March 14, 2016 Share Posted March 14, 2016 If I copy the license key to the SD card it'll work when I plug it in? I do have the key. Are there any other files I need to put on it? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 14, 2016 Content Provider Share Posted March 14, 2016 Copy the license key in your Pin2DMD tool folder Connect the controller with the microUSB cable to your PC. Install driver when needed. Start the Pin2DMD.exe The tool looks for a matching key file. And unlock the FW! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 14, 2016 Content Provider Share Posted March 14, 2016 Thats all. The unlock is saved in the controller memory. But you have to repeat it after a FW update. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted March 14, 2016 Author Content Provider Share Posted March 14, 2016 ... or rename it to pin2dmd.key and copy it to your sd-card. It is all here http://vpuniverse.com/forums/topic/2458-pin2dmd-v2-activation/ Link to comment Share on other sites More sharing options...
fattdirk Posted March 15, 2016 Share Posted March 15, 2016 Do you have a recommended source for an SD card that is compatible? I have 3 that all aren't recognized. Link to comment Share on other sites More sharing options...
Rappelbox Posted March 15, 2016 Share Posted March 15, 2016 sounds like you have the V1 version?! On that version it's just try and error, but i recommend trying with small and cheap china cards Greets, Dom Link to comment Share on other sites More sharing options...
Djurre Posted March 15, 2016 Share Posted March 15, 2016 My experience, the smaller (1gb or so) the better. See also Uncle Sash's manual (Pin2DMD Installation - micro SD Card test 11-29-2015) Link to comment Share on other sites More sharing options...
coyote Posted March 15, 2016 Share Posted March 15, 2016 Yeah, just about everything works with v2.0 shield. I'm using a 32Gb Micro SD card in an adapter, no problems. Link to comment Share on other sites More sharing options...
fattdirk Posted March 15, 2016 Share Posted March 15, 2016 So I've tried both a 8GB and 32GB card and neither is detected. I have a V2.0 shield. The SD card fits super loose. Does anyone else have that issue? I might pull it apart and test the continuity on the connections now that you guys say that you have no issue with your SD cards. Link to comment Share on other sites More sharing options...
coyote Posted March 15, 2016 Share Posted March 15, 2016 So I've tried both a 8GB and 32GB card and neither is detected. I have a V2.0 shield. The SD card fits super loose. Does anyone else have that issue? I might pull it apart and test the continuity on the connections now that you guys say that you have no issue with your SD cards. Press it in until it snaps. It should snap in, then press and release to snap it out. Keep in mind, the SD card should go in upside down. (Exposed connectors on SD card facing up, away from sheild PCB.) Link to comment Share on other sites More sharing options...
fattdirk Posted March 16, 2016 Share Posted March 16, 2016 Press it in until it snaps. It should snap in, then press and release to snap it out. Keep in mind, the SD card should go in upside down. (Exposed connectors on SD card facing up, away from sheild PCB.) Got it - I was sliding it in. It works perfect now! Thanks. Now to figure out how to colorize. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 17, 2016 Content Provider Share Posted March 17, 2016 Today I created a Video to use it in my PinballX. You can Download it here: http://vpuniverse.com/forums/files/file/4145-dmd-logo-video/ The Original "AVI Video" file: On the DMD: have fun with it... - Sascha Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 22, 2016 Content Provider Share Posted March 22, 2016 Hello Folks! I updatet the Download Section from the Pin2DMD - Documentation. Latest Version from the Instructions are Online : All docs are NOW in the Download Section from Pin2DMD! http://vpuniverse.com/forums/files/category/85-pin2dmd-documentation/ Have Fun your UncleSash Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 22, 2016 Content Provider Share Posted March 22, 2016 SD Card Reader FIX for REV 1.x User Online: http://vpuniverse.com/forums/files/file/4155-dirty-emergency-sd-card-reader-in-diy/ German Version: http://vpuniverse.com/forums/files/file/4156-unsch%C3%B6ner-sd-kartenleser-f%C3%BCr-den-notfall/ Works great! Looks ugly! reards Sascha Link to comment Share on other sites More sharing options...
pinovogel Posted April 8, 2016 Share Posted April 8, 2016 The same here... i ordered one kit from rappelbox.. Rgb and one kit from angela.. Grb solved for the color by swapping cables.. but still got the bad lines... Same here grb and the bad lines but if i change 1 panel with a another panel from a other set(rgb) the badlines are gone but there a colour difference. Which cables you switch? Link to comment Share on other sites More sharing options...
gech Posted April 10, 2016 Share Posted April 10, 2016 you have to swap red and green. Red is normaly PD0 and PD3 Green is normally PD1 and PD4. you have to swap those 2 pairs of cables ;-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.