Content Provider TerryRed Posted December 13, 2017 Content Provider Share Posted December 13, 2017 2 hours ago, supermario0523 said: I've found the solution!!!!! So in bypassing the octo board (which I never got to work at all), I neglected one operation.... Which I found commented in the code for BASICTEST in Arduino... Connect pin 15 and 16 together but not to anything else. That IMMEDIATELY solved the problem and got my LEDs working! I saw that on VPA...glad you sorted it out. I've been busy with so many things...I've not been getting to my messages. Link to comment Share on other sites More sharing options...
Jodannar Posted December 14, 2017 Share Posted December 14, 2017 Great to hear you got it working Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mandolinor Posted February 20, 2018 Share Posted February 20, 2018 Hello people. It must be exhausting answering all the newbies but the topic is complex for people who like Pinballs but know little about electronics. Got the 144/m leds, the teensy and adapter and I read very much. But here myself to make the most stupid question of the thread. This will only manage the adressable LEDs stripes right? Cause I was about to buy some strobe and beacons and said to myself "how is this two cable device to receive signal from a Ethernet cable of the teensy?". For beacons and strobes, LedWiz is mandatory right? Here in Spain LedWiz is like plutonium, I actualy found out it is cheaper to buy eight meters of 144/m leds and cover the whole Pincab of lights. Making a secondary matrix of stripes for the top of the cab is maybe a better solution for flashers dont you think? Thank you for taking your time and congratulations for those beautiful machines that are so inpiring. Link to comment Share on other sites More sharing options...
randr Posted February 21, 2018 Author Share Posted February 21, 2018 Ledwiz or pinscape or many generic equivalents are needed to control other toys correct. Link to comment Share on other sites More sharing options...
randyre Posted February 22, 2018 Share Posted February 22, 2018 On 9/10/2017 at 1:37 AM, TerryRed said: A day of greatness is upon us.... DOFLinx will soon support triggering "any" DOF device and command. This means that finally.... addressable leds (MX), will work with Future Pinball and Pinball FX2! Here's a coming soon "reveal" video I made.... "Let there be light!" Is there somewhere to download the customized DOFLinx files to update the individual boards? Figured it out. Its in the DOF Config tool INI that are uploaded by users for each table. So its essentially automatic. Do I have this correct? Link to comment Share on other sites More sharing options...
Mandolinor Posted March 22, 2018 Share Posted March 22, 2018 FIXED: The problem was the Teensie with bad soldering. I am even surprised I managed to solve it. I just squeeze it in anger and suddenly there was light. I can't believe it. Now the right strip effects start 10 leds away, but this is like easy now I guess. Hope this helps if anyone has this problem. Copy my problem from another topic. I was trying not to need to open a topic but I hit the wall, sorry. This is my situation. This diagram is just for the context. When I boot the thing, only Right Led Strip turns on, but not with the expected effects, but with random patterns and colours, some leds don't turn on and others do it but weak. I thought it could be the voltage, so I deattached everything but the Right Strip, and I connected a single 5V 16A power unit to it. The effect is exactly the same, take a look: https://www.youtube.com/watch?v=DC8OkdCRg0U You can see the power supply just above. This is supposed to be the effect that happens at the beggining of this other video (bride of pinbot ball launch). https://www.youtube.com/watch?v=74KSNemLO3Y In Medieval Madness this effect is red as it has to be, but very very weak, and when ball launches, the trail is so weak it dissapears at some points of the strip. It is only a 100 Led strip. Here is my cabinet file: <?xml version="1.0"?> <Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Name>Pinball</Name> <OutputControllers> <TeensyStripController> <Name>TeensyStripController</Name> <NumberOfLedsStrip1>100</NumberOfLedsStrip1> <NumberOfLedsStrip2>232</NumberOfLedsStrip2> <NumberOfLedsStrip3>100</NumberOfLedsStrip3> <NumberOfLedsStrip4>60</NumberOfLedsStrip4> <NumberOfLedsStrip5>0</NumberOfLedsStrip5> <NumberOfLedsStrip6>0</NumberOfLedsStrip6> <NumberOfLedsStrip7>0</NumberOfLedsStrip7> <NumberOfLedsStrip8>0</NumberOfLedsStrip8> <ComPortName>COM3</ComPortName> </TeensyStripController> </OutputControllers> <Toys> <LedStrip> <Name>PF Right</Name> <Width>1</Width> <Height>100</Height> <LedStripArrangement>BottomUpLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>1</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>PF Back</Name> <Width>58</Width> <Height>4</Height> <LedStripArrangement>RightLeftAlternateBottomUp</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>101</FirstLedNumber> <FadingCurveName>Linear0To224</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>PF Left</Name> <Width>1</Width> <Height>100</Height> <LedStripArrangement>BottomUpLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>333</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>SPEAKERS</Name> <Width>1</Width> <Height>60</Height> <LedStripArrangement>BottomUpLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>434</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedWizEquivalent> <Name>LedWizEquivalent 30</Name> <Outputs> <LedWizEquivalentOutput> <OutputName>PF Right</OutputName> <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>PF Back</OutputName> <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>PF Left</OutputName> <LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>SPEAKERS</OutputName> <LedWizEquivalentOutputNumber>10</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> </Outputs> <LedWizNumber>30</LedWizNumber> </LedWizEquivalent> </Toys> <AutoConfigEnabled>true</AutoConfigEnabled> </Cabinet> Link to comment Share on other sites More sharing options...
randyre Posted March 30, 2018 Share Posted March 30, 2018 On 3/22/2018 at 11:24 AM, Mandolinor said: When I boot the thing, only Right Led Strip turns on, but not with the expected effects, but with random patterns and colours, some leds don't turn on and others do it but weak. I thought it could be the voltage, so I deattached everything but the Right Strip, and I connected a single 5V 16A power unit to it. The effect is exactly the same, take a look: In Medieval Madness this effect is red as it has to be, but very very weak, and when ball launches, the trail is so weak it dissapears at some points of the strip. It is only a 100 Led strip. I would guess its either a soldering problem on the teensy still, or a power supply problem. the strips use about 9-10A per meter, even though you tried it with a single strip and a 16A power supply, if you have anything else attached to that 5V supply it may not be enough power. Link to comment Share on other sites More sharing options...
Mandolinor Posted March 30, 2018 Share Posted March 30, 2018 Yeah I fixed it, thanks, it was the soldering. I found out it is as easy and simple as explained, but execution is key. Right now I have no problems setting up the config file and leds strips effects, but somehow every RGB Undercab -complex or smart- effect I set in DOF Config tool does not work when applied to my leds. Luckily it is a minor problem. Link to comment Share on other sites More sharing options...
truegamer25 Posted June 3, 2018 Share Posted June 3, 2018 Hey there, I've been trying to dig, research, bang my head against a wall, pray to the elder gods, and still can't seem to wrap my head around what I need to do for this... I've got an LEDWiz that I intend to use for wiring up two side led strips and a back matrix - powering and testing the strips aside (i'll make sure they work with ledblinky), I am at a loss as to how I'm supposed to be programming these in the Dof Configtool. I also plan to have undercab lighting with a generic/programmable strip, but the other led strips are ws2812b's with 144/m led's. I figure I should be able to wire the side strips and matrix up to three ports on the LEDwiz, and undercab as a separate set of rgb's (so ports 1-3 as the side left, side right, matrix, 4-6 as rgb undercab) but for configuring the DOF Configtool, I have no idea what option i should be mapping for the ws2812's...since the side strips/matrix are individually addressable led's and only one wire per strip is for the data, can someone give me a quick rundown of what I should be configuring, perhaps even a "here you go, dummy" screenshot? And, forgive rookie question number two, but am I correct that after the ports are configured on the configtool, I'll download then edit the config file that is built and manually enter the strip beginning and end/positional codes from scratch, or is there usually a spot that has commented out/pre-entered options i need to modify? And one last question, do the fancy doflinx /dof mx tables already adjust based on the config's, or am i also going to need to make changes to tables to get 'em to work, namely the back matrix? Please help save my mind (and forehead) further torment guys! Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Now that I have everything updated on my build to run the new Transforrmers Pup-Pack and everything is working as expected, I thought I would tackle setting up the addressable leds for my cabinet build. My build consists of 3 screens (DMD lcd display is split duty as a topper as well). I'm using Zeb's plunger/controller and I have SSF up and running along with DOF. I have 1 LED Wiz and one Teensy setup in DOF Config tool. Although nothing is currently connected to the LED Wiz. I have the Teensy installed and configured as outlined in this and other threads. I've generated my config files from the DOF config tool, but I'm not seeing anything going on with the LED strip that I have hooked up. So far, I just have 2 meters of 144/m addressable leds hooked to the orange/orange-white cat cable. The LEDs are working when I use the Sample arduino test app. Here are my cabinet and other DOF files for your review. Hoping someone can point me in the right direction as I believe I have followed all of the necessary steps, but obviously something is missing. CabinetConfig.xml: <?xml version="1.0"?> <Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Name>GeCh Pin</Name> <OutputControllers> <TeensyStripController> <Name>LedStripController</Name> <NumberOfLedsStrip1>288</NumberOfLedsStrip1> <NumberOfLedsStrip2>0</NumberOfLedsStrip2> <NumberOfLedsStrip3>0</NumberOfLedsStrip3> <NumberOfLedsStrip4>0</NumberOfLedsStrip4> <NumberOfLedsStrip5>0</NumberOfLedsStrip5> <NumberOfLedsStrip6>0</NumberOfLedsStrip6> <NumberOfLedsStrip7>0</NumberOfLedsStrip7> <NumberOfLedsStrip8>0</NumberOfLedsStrip8> <ComPortName>COM6</ComPortName> </TeensyStripController> </OutputControllers> <Toys> <LedStrip> <Name>Sideboard Right</Name> <Width>1</Width> <Height>144</Height> <LedStripArrangement>BottomUpRightLeft</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>1</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LedStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>Sideboard Left</Name> <Width>1</Width> <Height>144</Height> <LedStripArrangement>TopDownLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>145</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LedStripController</OutputControllerName> </LedStrip> <LedWizEquivalent> <Name>LedWizEquivalent 30</Name> <Outputs> <LedWizEquivalentOutput> <OutputName>Sideboard Right</OutputName> <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>Sideboard Left</OutputName> <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> </Outputs> <LedWizNumber>30</LedWizNumber> </LedWizEquivalent> </Toys> </Cabinet> Here is my GlobalConfig.xml: <?xml version="1.0" encoding="utf-8"?> <!--Global configuration for the DirectOutput framework.--> <!--Saved by DirectOutput Version 3.1.6656.21457: 2018-09-27 21-13-16--> <GlobalConfig> <LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs> <LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs> <LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs> <PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs> <IniFilesPath /> <CabinetConfigFilePattern>C:\DirectOutput\Config\CabinetConfig.xml</CabinetConfigFilePattern> <TableConfigFilePatterns /> <EnableLogging>true</EnableLogging> <ClearLogOnSessionStart>true</ClearLogOnSessionStart> <LogFilePattern>.\DirectOutput.log</LogFilePattern> </GlobalConfig> And my DofLinx.ini file: ###### DOFLINX - MAIN CONFIG INI FILE ###### ###### MINIMAL DESCRIPTIONS ###### ###### UPDATED BY TERRYRED ###### # IMPORTANT! Please go through and edit EVERY section for your particular setup! If you don't you may get errors! DEBUG=1 DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig.ini PATH_B2S_SERVER=c:\Visual Pinball\Tables\ DIRECTOUTPUTGLOBAL=C:\DirectOutput\Config\GlobalConfig_B2SServer.xml PATH_FX3=C:\DirectOutput\FX3\ PATH_FX3_B2S=C:\DirectOutput\DOFLinx_FX3_B2S\ RGB_STYLE=RANDOM RGB_TRIGGER=FIXED RGB_MIN_TIME=8000 RGB_OUTPUT=129 FP_ATTEMPT_LINK=1 FP_LINK_WAIT_TIME=95000 LINK_LF=101,50,10000,255 LINK_RF=102,50,10000,255 LINK_LS=104,50,1000,255 LINK_RS=105,50,1000,255 LINK_ML=106,50,1000,255 LINK_MC=107,50,1000,255 LINK_MR=108,50,1000,255 LINK_BL=109,50,1000,255 LINK_BC=110,50,1000,255 LINK_BR=111,50,1000,255 LINK_SH=112,1000,5000,255 LINK_GR=113,750,10000,255 LINK_KN=114,120,500,255 LINK_BK=115,FLASH,200,255 LINK_SR=116,ON,0,255 LINK_ST=117 LINK_EB=118 LINK_CN=119 LINK_EX=120 LINK_LB=121 LINK_FR=122 #LINK_FLOL=201 #LINK_FLIL=204 #LINK_FLCN=207 #LINK_FLIR=210 #LINK_FLOR=213 BUTTONS_ON=120 L_FLIPPER_KEY=A0 R_FLIPPER_KEY=A1 L_FLIPPER_OUTPUT=101 R_FLIPPER_OUTPUT=102 MAX_FLIPPER_ON=5000 KEY_TO_OUTPUT=34 119 KEY_TO_COLOUR=A2 109 Red A3 109 Red PROCESSES=Pinball FX3,Pinball FX2,Future Pinball,mamelayplus PROCESS_TO_ACTIVE_TIME=1 AUTO_MX=1 OUTPUT_GAME_NAME=0 ######## DOFLINX SETTINGS SCREEN ######## SETTING_ACTIVATE=A0,A1,A2,A3 SETTING_UP=A0 SETTING_DOWN=A1 SETTING_CHANGE=31 SETTING_EXIT=32 SETTING_MESSAGE=L Flipper = Up, R Flipper = Down, Start = Change, EB = Exit SETTING=UnderCab,115,Under cabinet lighting disabled,Off,Y,114,150 SETTING=Addressable,119,Addressable LEDs enabled,Off,Y,118,50 SETTING=NIGHT,,Night Mode,Off,Y ######## GAME COLOURS ######## GAME_COLOUR=AlienIsolationPinball,Medium_Blue,Lime,Dodger_Blue,Lime_Green GAME_COLOUR=AlienvsPredatorPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green GAME_COLOUR=AliensPinball,Medium_Blue,Dark_Golden_Rod,Dodger_Blue GAME_COLOUR=AmericanDadPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green GAME_COLOUR=ArcherPinball,Medium_Blue,Yellow,Dodger_Blue,Blue_Violet GAME_COLOUR=Biolab,Dark_Red,Lime,Blue,Cyan,Blue_Violet,Yellow GAME_COLOUR=Blade,Blue,Blue_Violet,Salmon GAME_COLOUR=BobaFett,Lime,Golden_Rod,Blue_Violet GAME_COLOUR=BobsBurgersPinball,Medium_Blue,Lime_Green,Dark_Red,Dodger_Blue,Yellow_Green GAME_COLOUR=CaptainAmerica,Blue,Dark_Red,Dodger_Blue,Gold GAME_COLOUR=CastleStorm,Blue,Gold,Lime,Dodger_Blue,Orange,Lime_Green GAME_COLOUR=CivilWar,Blue,Dark_Red,Dodger_Blue,Light_Salmon GAME_COLOUR=Deadpool,Dark_Red,Blue,Medium_slate_blue,Dodger_Blue GAME_COLOUR=DoomPinball,Yellow,Silver,Gray,Dark_Orange,Dim_Gray,Orange_Red,Peru,Crimson GAME_COLOUR=DoctorStrange,Dark_Red,Blue,Gold,Lime_Green,Dark_Violet,Orange,Dodger_Blue,Lime,Medium_Slate_Blue GAME_COLOUR=EarthDefense,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime GAME_COLOUR=ElDorado,Orange,Lime_Green,Yellow,Coral,Lime,Yellow_Green,Cyan GAME_COLOUR=EpicQuest,Lime_Green,Dodger_Blue,Yellow_Green,Cyan GAME_COLOUR=Excalibur,Dark_Red,Blue,Lime,Dodger_Blue,Cyan GAME_COLOUR=FalloutPinball,Crimson,White,Red,Brown,Light_Steel_Blue,Slate_Blue GAME_COLOUR=FamilyGuyPinball,Dodger_Blue,Lime_Green,Salmon,Dark_Violet,Yellow_Green GAME_COLOUR=FantasticFour,Blue,Yellow,Dodger_Blue,Orange_Red GAME_COLOUR=FearItself,Dark_Red,Blue,Yellow,Lime,Dark_Violet,Orange GAME_COLOUR=GhostRider,Dodger_Blue,White,Yellow,Light_Salmon,Orange_Red GAME_COLOUR=GuardiansoftheGalaxy,Dodger_Blue,Orange,Medium_Purple GAME_COLOUR=IRONMAN,Blue,Dark_Red,Dodger_Blue,Gold GAME_COLOUR=Mars,Blue,Yellow,Deep_sky_blue,Gold GAME_COLOUR=MarvelsAntMan,Medium_Blue,Dark_Red,Dodger_Blue GAME_COLOUR=MarvelsAvengersAgeofUltron,Dark_Red,Dodger_Blue,Lime_Green,Light_Salmon,Cyan GAME_COLOUR=MarvelsTheAvengers,Blue,Dark_Red,Dodger_Blue,Gold GAME_COLOUR=MarvelsWomenofPowerAForce,Red,Lime,Gold,Slate_Blue,Tomato,Silver,Dark_Orchid,Spring_Green GAME_COLOUR=MarvelsWomenofPowerChampions,Dodger_Blue,Yellow,Red,Gray,Golden_Rod,Crimson,Orange GAME_COLOUR=MoonKnight,Dodger_Blue,Blue,Cyan,Royal_Blue GAME_COLOUR=MsSplosionMan,Dodger_Blue,Pink,Medium_Blue,Purple,Royal_Blue GAME_COLOUR=Paranormal,Lime_Green,Dodger_Blue,Yellow_Green GAME_COLOUR=Pasha,Dark_Violet,Golden_Rod,Dodger_Blue GAME_COLOUR=PlantsVSZombies,Lime_Green,Yellow_Green,Dodger_Blue GAME_COLOUR=Portal,Dodger_Blue,Yellow_Green,Medium_Blue,Yellow GAME_COLOUR=Rome,Dark_Red,Gold,Dodger_Blue,Light_Salmon,Yellow_Green,Orange GAME_COLOUR=SecretsoftheDeep,Blue,Yellow,Dodger_Blue GAME_COLOUR=Shaman,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime GAME_COLOUR=SorcerersLair,Blue,Blue_Violet,Dodger_Blue,Slate_Blue GAME_COLOUR=SouthParkButtersVeryOwnPinballGame,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green GAME_COLOUR=SouthParkSuperSweetPinball,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green,Yellow_Green GAME_COLOUR=SpiderMan,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange GAME_COLOUR=STARWARSDARTHVADER,Light_sky_blue,Dark_Red,Cyan GAME_COLOUR=StarWarsEpisodeVTheEmpireStrikesBack,Medium_Blue,Yellow,Dark_Red,Dodger_Blue GAME_COLOUR=StarWarsEpisodeVIReturnoftheJedi,Slate_Blue,Golden_Rod,Medium_Blue,Lime_Green,Dodger_Blue,Yellow GAME_COLOUR=StarWarsPinballDroids,Medium_Blue,Yellow,Orange,Navy,Gold,Orange_Red GAME_COLOUR=StarWarsPinballEpisodeIVANewHope,Cyan,Golden_Rod,Dodger_Blue,Yellow GAME_COLOUR=StarWarsPinballHanSolo,Dodger_Blue,Royal_Blue,Antique_White GAME_COLOUR=StarWarsPinballMastersoftheForce,Medium_Blue,Salmon,Dodger_Blue,Purple,Cyan,Dark_Red GAME_COLOUR=StarWarsPinballMightoftheFirstOrder,Light_sky_blue,Dodger_Blue,Dark_Red,Cyan GAME_COLOUR=StarWarsPinballStarWarsRebels,Medium_Blue,Yellow,Royal_Blue,Orange_Red,Purple,Lime_Green GAME_COLOUR=StarWarsPinballTheForceAwakens,Dark_Red,Medium_Blue,Blue_Violet GAME_COLOUR=StarWarsPinballRogueOne,Gray,Silver,Light_Sky_Blue,Teal,Beige,Bisque,Aqua_Marine,Slate_Gray,Dark_Orange GAME_COLOUR=StarWarsStarfighterAssault,Medium_Blue,Dodger_Blue,Dark_Red GAME_COLOUR=StarWarsTheCloneWars,Dark_Red,Pink,Medium_Blue,Medium_Turquoise,Lime,Lime_Green GAME_COLOUR=SuperLeagueASRoma,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueZenStudiosFC,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueArsenalFC,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueLiverpoolFC,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueJuventus,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueACMilan,Lime_Green,Orange,Lime,Yellow,Red GAME_COLOUR=SuperLeagueRealMadridCF,Lime_Green,Medium_Blue,Lime,Yellow,Red GAME_COLOUR=SuperLeagueFCBarcelona,Slate_Blue,Lime_Green,Yellow,Blue_Violet,Lime,Red GAME_COLOUR=Tesla,Lime_Green,Yellow_Green,Dodger_Blue,Golden_Rod GAME_COLOUR=TheElderScrollsVSkyrimPinball,Light_Slate_Gray,Gold,Golden_Rod,Dark_Sea_Green,Peru,Tan GAME_COLOUR=TheInfinity Gauntlet,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime GAME_COLOUR=TheWalkingDead,Lime_Green,Royal_Blue,Yellow_Green GAME_COLOUR=Thor,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime GAME_COLOUR=V12,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue GAME_COLOUR=Venom,Dark_Red,Blue,Dark_Violet,Dodger_Blue GAME_COLOUR=WildWestRampage,Yellow_Green,Dodger_Blue,Royal_Blue GAME_COLOUR=Wolverine,Dark_Red,Medium_Blue,Yellow,Dark_Violet GAME_COLOUR=WorldWarHulk,Lime_Green,Yellow_Green,Dodger_Blue,Lime,Yellow GAME_COLOUR=XMen,Blue,Blue_Violet,Gold,Dodger_Blue,Slate_Blue,Orange GAME_COLOUR=ET,Yellow,Amber,Sky_blue,Sienna,Aqua_marine,Slate_gray,Dark_olive_green GAME_COLOUR=BacktotheFuture,Light_steel_blue,White,Crimson,Gray,Teal,Yellow,Dodger_blue GAME_COLOUR=Jaws,Dark_turquoise,Gray,White,Salmon,Light_coral,Tan,Papaya_whip,Peru GAME_COLOUR=SonofZeus,Dark_orange,Silver,Dark_salmon,Amber,Sienna,Light_steel_blue,Firebrick GAME_COLOUR=AdventureLand,Red,Cyan,Yellow,White,Medium_orchid,Aqua,Dark_turquoise,Medium_purple GAME_COLOUR=JurassicPark,Lawn_green,Amber,Yellow,Light_slate_gray,Cadet_blue,Black,Rosy_brown,Light_steel_blue,Medium_sea_green,Silver GAME_COLOUR=JurassicWorld,Light_steel_blue,Silver,Tan,Forest_green,Gray,Cadet_blue,Yellow_green,Teal,Bisque GAME_COLOUR=JurassicMayhem,Sandy_brown,Forest_green,Dark_green,Dark_olive_green,Dark_khaki,Peru,Tan,Navajo_white,Beige,Dark_golden_rod,Corn_silk GAME_COLOUR=StarWarsLastJedi,Gold,Orange_Red,Aqua,Coral,Dark_Khaki,Light_Steel_Blue,Yellow_Green,Steel_Blue GAME_COLOUR=StarWarsAhchToIsland,Peru,Tan,Light_Slate_Gray,Light_Golden_Rod,Turquoise,Deep_Sky_Blue,Spring_Green,Steel_Blue Thanks in advance! Link to comment Share on other sites More sharing options...
outhere Posted September 28, 2018 Share Posted September 28, 2018 I'm not seeing anything you're wrong Could you could post your DirectOutput.log I'm assuming you followed all the steps in here that apply to your setup http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?custom=EU&expver=R3.201602xx&sid=DOF Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Thanks for looking, outhere. Here is my DirectOutput.log file. It looks like it isn't loading the cabinet config file and using the AutoConfig option. I'm at a loss as to why. DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.28 01:10:01.561 DirectOutput Logger initialized 2018.09.28 01:10:01.476 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.28 01:10:01.478 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.28 01:10:01.479 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.28 01:10:01.480 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.28 01:10:01.480 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.28 01:10:01.481 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.28 01:10:01.481 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.28 01:10:01.545 Finishing framework 2018.09.28 01:10:01.546 Finishing cabinet 2018.09.28 01:10:01.547 Debug: Finishing output controllers 2018.09.28 01:10:01.547 Debug: Output controllers finished 2018.09.28 01:10:01.547 Cabinet finished 2018.09.28 01:10:01.547 DirectOutput framework finished. 2018.09.28 01:10:01.547 Bye and thanks for using! 2018.09.28 01:10:01.549 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.28 01:10:01.561 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.28 01:10:01.561 Loading Pinball parts 2018.09.28 01:10:01.561 Loading cabinet 2018.09.28 01:10:01.561 No cabinet config file loaded. Will use AutoConfig. 2018.09.28 01:10:01.562 Cabinet auto configuration started 2018.09.28 01:10:01.603 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.28 01:10:01.610 Opening 32-bit LedWiz driver... 2018.09.28 01:10:01.612 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.28 01:10:01.612 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.28 01:10:01.614 Cabinet auto configuration finished 2018.09.28 01:10:01.614 Cabinet loaded 2018.09.28 01:10:01.614 Loading table config 2018.09.28 01:10:01.614 No TableFilename specified, will use empty tableconfig 2018.09.28 01:10:01.614 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.28 01:10:01.616 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.28 01:10:01.619 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.28 01:10:01.867 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.28 01:10:01.869 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.28 01:10:02.099 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.28 01:10:02.100 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.28 01:10:02.108 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.28 01:10:02.109 Pinball parts loaded 2018.09.28 01:10:02.109 Starting processes 2018.09.28 01:10:02.110 Initializing cabinet 2018.09.28 01:10:02.110 Debug: Initializing output controllers 2018.09.28 01:10:02.110 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:02.111 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:02.111 Debug: Output controllers initialized 2018.09.28 01:10:02.112 Updater thread for LedWiz 01 started. 2018.09.28 01:10:02.114 Cabinet initialized 2018.09.28 01:10:02.116 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2018.09.28 01:10:02.158 Framework initialized. 2018.09.28 01:10:02.158 Have fun! 2018.09.28 01:10:02.162 Initializing cabinet 2018.09.28 01:10:02.163 Debug: Initializing output controllers 2018.09.28 01:10:02.163 Debug: Output controllers initialized 2018.09.28 01:10:02.163 Cabinet initialized 2018.09.28 01:10:02.166 Opening 32-bit LedWiz driver... 2018.09.28 01:10:02.166 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:02.166 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:02.166 Opening 32-bit LedWiz driver... 2018.09.28 01:10:03.419 Debug: Disposing LedWiz instance 01. 2018.09.28 01:10:04.150 Finishing framework 2018.09.28 01:10:04.150 Finishing cabinet 2018.09.28 01:10:04.150 Debug: Finishing output controllers 2018.09.28 01:10:04.151 Debug: Finishing LedWiz Nr. 01 2018.09.28 01:10:04.151 Updater thread for LedWiz 01 terminated. 2018.09.28 01:10:04.162 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 01:10:04.162 Debug: Output controllers finished 2018.09.28 01:10:04.162 Cabinet finished 2018.09.28 01:10:04.162 DirectOutput framework finished. 2018.09.28 01:10:04.162 Bye and thanks for using! 2018.09.28 01:10:04.162 Initializing cabinet 2018.09.28 01:10:04.162 Debug: Initializing output controllers 2018.09.28 01:10:04.162 Debug: Output controllers initialized 2018.09.28 01:10:04.162 Cabinet initialized 2018.09.28 01:10:04.167 Opening 32-bit LedWiz driver... 2018.09.28 01:10:04.167 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:04.167 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:04.167 Opening 32-bit LedWiz driver... 2018.09.28 01:10:04.167 Updater thread for LedWiz 01 started. 2018.09.28 01:10:05.434 Debug: Disposing LedWiz instance 01. 2018.09.28 01:10:22.534 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
outhere Posted September 28, 2018 Share Posted September 28, 2018 8 hours ago, CaptainYell0wJacket99 said: Now that I'm awake I will try this again <CabinetConfigFilePattern>C:\DirectOutput\Config\CabinetConfig.xml</CabinetConfigFilePattern> In your GlobalConfig_B2SServer.xml Change the line to <CabinetConfigFilePattern>C:\DirectOutput\Config\cabinet.xml</CabinetConfigFilePattern> - Thanks for looking, outhere. Here is my DirectOutput.log file. It looks like it isn't loading the cabinet config file and using the AutoConfig option. I'm at a loss as to why. DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.28 01:10:01.561 DirectOutput Logger initialized 2018.09.28 01:10:01.476 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.28 01:10:01.478 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.28 01:10:01.479 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.28 01:10:01.480 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.28 01:10:01.480 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.28 01:10:01.481 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.28 01:10:01.481 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.28 01:10:01.545 Finishing framework 2018.09.28 01:10:01.546 Finishing cabinet 2018.09.28 01:10:01.547 Debug: Finishing output controllers 2018.09.28 01:10:01.547 Debug: Output controllers finished 2018.09.28 01:10:01.547 Cabinet finished 2018.09.28 01:10:01.547 DirectOutput framework finished. 2018.09.28 01:10:01.547 Bye and thanks for using! 2018.09.28 01:10:01.549 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.28 01:10:01.561 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.28 01:10:01.561 Loading Pinball parts 2018.09.28 01:10:01.561 Loading cabinet 2018.09.28 01:10:01.561 No cabinet config file loaded. Will use AutoConfig. 2018.09.28 01:10:01.562 Cabinet auto configuration started 2018.09.28 01:10:01.603 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.28 01:10:01.610 Opening 32-bit LedWiz driver... 2018.09.28 01:10:01.612 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.28 01:10:01.612 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.28 01:10:01.614 Cabinet auto configuration finished 2018.09.28 01:10:01.614 Cabinet loaded 2018.09.28 01:10:01.614 Loading table config 2018.09.28 01:10:01.614 No TableFilename specified, will use empty tableconfig 2018.09.28 01:10:01.614 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.28 01:10:01.616 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.28 01:10:01.619 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.28 01:10:01.867 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.28 01:10:01.869 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.28 01:10:02.099 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.28 01:10:02.100 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.28 01:10:02.108 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.28 01:10:02.109 Pinball parts loaded 2018.09.28 01:10:02.109 Starting processes 2018.09.28 01:10:02.110 Initializing cabinet 2018.09.28 01:10:02.110 Debug: Initializing output controllers 2018.09.28 01:10:02.110 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:02.111 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:02.111 Debug: Output controllers initialized 2018.09.28 01:10:02.112 Updater thread for LedWiz 01 started. 2018.09.28 01:10:02.114 Cabinet initialized 2018.09.28 01:10:02.116 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2018.09.28 01:10:02.158 Framework initialized. 2018.09.28 01:10:02.158 Have fun! 2018.09.28 01:10:02.162 Initializing cabinet 2018.09.28 01:10:02.163 Debug: Initializing output controllers 2018.09.28 01:10:02.163 Debug: Output controllers initialized 2018.09.28 01:10:02.163 Cabinet initialized 2018.09.28 01:10:02.166 Opening 32-bit LedWiz driver... 2018.09.28 01:10:02.166 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:02.166 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:02.166 Opening 32-bit LedWiz driver... 2018.09.28 01:10:03.419 Debug: Disposing LedWiz instance 01. 2018.09.28 01:10:04.150 Finishing framework 2018.09.28 01:10:04.150 Finishing cabinet 2018.09.28 01:10:04.150 Debug: Finishing output controllers 2018.09.28 01:10:04.151 Debug: Finishing LedWiz Nr. 01 2018.09.28 01:10:04.151 Updater thread for LedWiz 01 terminated. 2018.09.28 01:10:04.162 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 01:10:04.162 Debug: Output controllers finished 2018.09.28 01:10:04.162 Cabinet finished 2018.09.28 01:10:04.162 DirectOutput framework finished. 2018.09.28 01:10:04.162 Bye and thanks for using! 2018.09.28 01:10:04.162 Initializing cabinet 2018.09.28 01:10:04.162 Debug: Initializing output controllers 2018.09.28 01:10:04.162 Debug: Output controllers initialized 2018.09.28 01:10:04.162 Cabinet initialized 2018.09.28 01:10:04.167 Opening 32-bit LedWiz driver... 2018.09.28 01:10:04.167 Debug: Initializing LedWiz Nr. 01 2018.09.28 01:10:04.167 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 01:10:04.167 Opening 32-bit LedWiz driver... 2018.09.28 01:10:04.167 Updater thread for LedWiz 01 started. 2018.09.28 01:10:05.434 Debug: Disposing LedWiz instance 01. 2018.09.28 01:10:22.534 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Thanks, outhere. I added the line above to my GlobalConfig_B2SServer.xml as it didn't previously exist in that file. I started DOF and opened my ACDC Luci table and then closed everything. Here is the log file from that session. As you can see, there appears to be an exception happening when loading the cabinet config file. Here is the log along with my cabinet.xml file. Teensy is on COM6. Thanks again! DirectOutput.log: DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.28 10:47:54.683 DirectOutput Logger initialized 2018.09.28 10:47:54.553 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.28 10:47:54.560 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.28 10:47:54.562 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.28 10:47:54.563 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.28 10:47:54.576 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.28 10:47:54.580 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.28 10:47:54.586 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.28 10:47:54.664 Finishing framework 2018.09.28 10:47:54.666 Finishing cabinet 2018.09.28 10:47:54.666 Debug: Finishing output controllers 2018.09.28 10:47:54.666 Debug: Output controllers finished 2018.09.28 10:47:54.666 Cabinet finished 2018.09.28 10:47:54.666 DirectOutput framework finished. 2018.09.28 10:47:54.666 Bye and thanks for using! 2018.09.28 10:47:54.668 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.28 10:47:54.683 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.28 10:47:54.683 Loading Pinball parts 2018.09.28 10:47:54.683 Loading cabinet 2018.09.28 10:47:54.684 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.28 10:47:54.693 EXCEPTION: Could not load cabinet config from XML data. 2018.09.28 10:47:54.693 EXCEPTION: Thread: 2018.09.28 10:47:54.693 EXCEPTION: Message: Exception --> Could not deserialize the cabinet config from XML data. 2018.09.28 10:47:54.693 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.28 10:47:54.693 EXCEPTION: Thread: 2018.09.28 10:47:54.693 EXCEPTION: Message: NullReferenceException --> Object reference not set to an instance of an object. 2018.09.28 10:47:54.695 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E) 2018.09.28 10:47:54.695 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml) 2018.09.28 10:47:54.695 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName) 2018.09.28 10:47:54.695 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile) 2018.09.28 10:47:54.695 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName) 2018.09.28 10:47:54.695 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception) 2018.09.28 10:47:54.695 No cabinet config file loaded. Will use AutoConfig. 2018.09.28 10:47:54.696 Cabinet auto configuration started 2018.09.28 10:47:54.748 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.28 10:47:54.756 Opening 32-bit LedWiz driver... 2018.09.28 10:47:54.758 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.28 10:47:54.758 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.28 10:47:54.761 Cabinet auto configuration finished 2018.09.28 10:47:54.761 Cabinet loaded 2018.09.28 10:47:54.761 Loading table config 2018.09.28 10:47:54.761 No TableFilename specified, will use empty tableconfig 2018.09.28 10:47:54.761 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.28 10:47:54.763 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.28 10:47:54.766 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.28 10:47:55.033 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.28 10:47:55.037 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.28 10:47:55.269 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.28 10:47:55.270 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.28 10:47:55.279 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.28 10:47:55.279 Pinball parts loaded 2018.09.28 10:47:55.280 Starting processes 2018.09.28 10:47:55.280 Initializing cabinet 2018.09.28 10:47:55.280 Debug: Initializing output controllers 2018.09.28 10:47:55.280 Debug: Initializing LedWiz Nr. 01 2018.09.28 10:47:55.282 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 10:47:55.282 Debug: Output controllers initialized 2018.09.28 10:47:55.282 Updater thread for LedWiz 01 started. 2018.09.28 10:47:55.284 Cabinet initialized 2018.09.28 10:47:55.286 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2018.09.28 10:47:55.337 Framework initialized. 2018.09.28 10:47:55.337 Have fun! 2018.09.28 10:47:55.343 Initializing cabinet 2018.09.28 10:47:55.343 Debug: Initializing output controllers 2018.09.28 10:47:55.343 Debug: Output controllers initialized 2018.09.28 10:47:55.343 Cabinet initialized 2018.09.28 10:47:55.347 Opening 32-bit LedWiz driver... 2018.09.28 10:47:55.347 Debug: Initializing LedWiz Nr. 01 2018.09.28 10:47:55.347 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 10:47:55.347 Opening 32-bit LedWiz driver... 2018.09.28 10:47:56.613 Debug: Disposing LedWiz instance 01. 2018.09.28 10:47:57.338 Finishing framework 2018.09.28 10:47:57.338 Finishing cabinet 2018.09.28 10:47:57.339 Debug: Finishing output controllers 2018.09.28 10:47:57.339 Debug: Finishing LedWiz Nr. 01 2018.09.28 10:47:57.339 Updater thread for LedWiz 01 terminated. 2018.09.28 10:47:57.350 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 10:47:57.350 Debug: Output controllers finished 2018.09.28 10:47:57.350 Cabinet finished 2018.09.28 10:47:57.350 DirectOutput framework finished. 2018.09.28 10:47:57.350 Bye and thanks for using! 2018.09.28 10:47:57.350 Initializing cabinet 2018.09.28 10:47:57.350 Debug: Initializing output controllers 2018.09.28 10:47:57.350 Debug: Output controllers initialized 2018.09.28 10:47:57.350 Cabinet initialized 2018.09.28 10:47:57.356 Opening 32-bit LedWiz driver... 2018.09.28 10:47:57.356 Debug: Initializing LedWiz Nr. 01 2018.09.28 10:47:57.356 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 10:47:57.356 Opening 32-bit LedWiz driver... 2018.09.28 10:47:57.356 Updater thread for LedWiz 01 started. 2018.09.28 10:47:58.612 Debug: Disposing LedWiz instance 01. 2018.09.28 10:48:00.612 Debug: Disposing LedWiz instance 01. 2018.09.28 10:49:18.163 ArtNet finished and updater thread stopped. 2018.09.28 10:49:18.163 PinControl finished and updater thread stopped. 2018.09.28 10:49:18.163 Debug: Finishing LedWiz Nr. 01 2018.09.28 10:49:18.163 Updater thread for LedWiz 01 terminated. 2018.09.28 10:49:18.174 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 10:49:18.174 ArtNet finished and updater thread stopped. 2018.09.28 10:49:18.174 PinControl finished and updater thread stopped. 2018.09.28 10:49:18.174 Finishing cabinet 2018.09.28 10:49:18.174 Debug: Finishing output controllers 2018.09.28 10:49:18.174 Debug: Output controllers finished 2018.09.28 10:49:18.174 Cabinet finished 2018.09.28 10:49:18.179 Debug: Disposing LedWiz instance 01. cabinet.xml: <?xml version="1.0"?> <Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Name>GeCh Pin</Name> <OutputControllers> <TeensyStripController> <Name>LedStripController</Name> <NumberOfLedsStrip1>144</NumberOfLedsStrip1> <NumberOfLedsStrip2>0</NumberOfLedsStrip2> <NumberOfLedsStrip3>0</NumberOfLedsStrip3> <NumberOfLedsStrip4>0</NumberOfLedsStrip4> <NumberOfLedsStrip5>0</NumberOfLedsStrip5> <NumberOfLedsStrip6>0</NumberOfLedsStrip6> <NumberOfLedsStrip7>0</NumberOfLedsStrip7> <NumberOfLedsStrip8>0</NumberOfLedsStrip8> <ComPortName>COM6</ComPortName> </TeensyStripController> </OutputControllers> <Toys> <LedStrip> <Name>Sideboard Right</Name> <Width>1</Width> <Height>72</Height> <LedStripArrangement>BottomUpRightLeft</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>1</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LedStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>Sideboard Left</Name> <Width>1</Width> <Height>72</Height> <LedStripArrangement>TopDownLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>73</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LedStripController</OutputControllerName> </LedStrip> <LedWizEquivalent> <Name>LedWizEquivalent 30</Name> <Outputs> <LedWizEquivalentOutput> <OutputName>Sideboard Right</OutputName> <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>Sideboard Left</OutputName> <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> </Outputs> <LedWizNumber>30</LedWizNumber> </LedWizEquivalent> </Toys> </Cabinet> Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 When I run the cabinet.xml text through an html validator it says the following. I have my </Cabinet> terminator at the end of the file. Does this need to change? Click on to jump to the error. In the document, you can point at with your mouse to see the error message. Errors in the XML document: 2: 63 Element type "Cabinet" must be followed by either attribute specifications, ">" or "/>". XML document: 1 <?xml version="1.0"?> 2 <Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Well, I found the first problem. I was missing a space in my <Cabinet....> tag (instance" xmlns:"). Still getting an error, but it appears to be making it farther than it was.... DirectOutput.log: DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.28 11:05:51.292 DirectOutput Logger initialized 2018.09.28 11:05:51.180 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.28 11:05:51.182 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.28 11:05:51.182 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.28 11:05:51.183 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.28 11:05:51.184 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.28 11:05:51.184 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.28 11:05:51.185 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.28 11:05:51.273 Finishing framework 2018.09.28 11:05:51.274 Finishing cabinet 2018.09.28 11:05:51.274 Debug: Finishing output controllers 2018.09.28 11:05:51.274 Debug: Output controllers finished 2018.09.28 11:05:51.274 Cabinet finished 2018.09.28 11:05:51.274 DirectOutput framework finished. 2018.09.28 11:05:51.274 Bye and thanks for using! 2018.09.28 11:05:51.276 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.28 11:05:51.292 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.28 11:05:51.292 Loading Pinball parts 2018.09.28 11:05:51.292 Loading cabinet 2018.09.28 11:05:51.293 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.28 11:05:51.372 1 output controller defnitions and 3 toy definitions loaded from cabinet config. 2018.09.28 11:05:51.372 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig. 2018.09.28 11:05:51.372 Cabinet auto configuration started 2018.09.28 11:05:51.395 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.28 11:05:51.403 Opening 32-bit LedWiz driver... 2018.09.28 11:05:51.403 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.28 11:05:51.403 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.28 11:05:51.405 Cabinet auto configuration finished 2018.09.28 11:05:51.405 Autoconfig complete. 2018.09.28 11:05:51.405 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml 2018.09.28 11:05:51.405 Cabinet loaded 2018.09.28 11:05:51.405 Loading table config 2018.09.28 11:05:51.405 No TableFilename specified, will use empty tableconfig 2018.09.28 11:05:51.405 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.28 11:05:51.407 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.28 11:05:51.410 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.28 11:05:51.681 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.28 11:05:51.683 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.28 11:05:51.913 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.28 11:05:51.914 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.28 11:05:51.930 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.28 11:05:51.931 Pinball parts loaded 2018.09.28 11:05:51.931 Starting processes 2018.09.28 11:05:51.931 Initializing cabinet 2018.09.28 11:05:51.931 Debug: Initializing output controllers 2018.09.28 11:05:51.934 TeensyStripController LedStripController intialized and updater thread started. 2018.09.28 11:05:51.934 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:51.934 TeensyStripController LedStripController updater thread started. 2018.09.28 11:05:51.935 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:51.935 Debug: Output controllers initialized 2018.09.28 11:05:51.935 Updater thread for LedWiz 01 started. 2018.09.28 11:05:51.939 Cabinet initialized 2018.09.28 11:05:51.941 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.975 Framework initialized. 2018.09.28 11:05:51.975 Have fun! 2018.09.28 11:05:51.985 Initializing cabinet 2018.09.28 11:05:51.985 Debug: Initializing output controllers 2018.09.28 11:05:51.985 Debug: Output controllers initialized 2018.09.28 11:05:51.985 Cabinet initialized 2018.09.28 11:05:51.995 Opening 32-bit LedWiz driver... 2018.09.28 11:05:51.995 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:51.995 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:51.995 Opening 32-bit LedWiz driver... 2018.09.28 11:05:52.444 EXCEPTION: TeensyStripController LedStripController updater thread could not connect to the controller. Thread will quit. 2018.09.28 11:05:52.444 EXCEPTION: Thread: TeensyStripController LedStripController updater thread 2018.09.28 11:05:52.444 EXCEPTION: Message: IOException --> The semaphore timeout period has expired. 2018.09.28 11:05:52.444 2018.09.28 11:05:52.444 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController() 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt() 2018.09.28 11:05:52.448 EXCEPTION: Targetsite: Void WinIOError(Int32, System.String) 2018.09.28 11:05:53.246 Debug: Disposing LedWiz instance 01. 2018.09.28 11:05:53.978 Finishing framework 2018.09.28 11:05:53.979 Finishing cabinet 2018.09.28 11:05:53.980 Debug: Finishing output controllers 2018.09.28 11:05:53.980 TeensyStripController LedStripController finished and updater thread stopped. 2018.09.28 11:05:53.980 Debug: Finishing LedWiz Nr. 01 2018.09.28 11:05:53.980 Updater thread for LedWiz 01 terminated. 2018.09.28 11:05:53.991 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 11:05:53.991 Debug: Output controllers finished 2018.09.28 11:05:53.991 Cabinet finished 2018.09.28 11:05:53.991 DirectOutput framework finished. 2018.09.28 11:05:53.991 Bye and thanks for using! 2018.09.28 11:05:53.991 Initializing cabinet 2018.09.28 11:05:53.991 Debug: Initializing output controllers 2018.09.28 11:05:53.991 Debug: Output controllers initialized 2018.09.28 11:05:53.991 Cabinet initialized 2018.09.28 11:05:54.003 Opening 32-bit LedWiz driver... 2018.09.28 11:05:54.003 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:54.003 Updater thread for LedWiz 01 started. 2018.09.28 11:05:54.004 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:54.004 Opening 32-bit LedWiz driver... 2018.09.28 11:05:54.258 Debug: Disposing LedWiz instance 01. 2018.09.28 11:05:56.281 Debug: Disposing LedWiz instance 01. 2018.09.28 11:06:29.464 ArtNet finished and updater thread stopped. 2018.09.28 11:06:29.464 PinControl finished and updater thread stopped. 2018.09.28 11:06:29.464 Debug: Finishing LedWiz Nr. 01 2018.09.28 11:06:29.464 Updater thread for LedWiz 01 terminated. 2018.09.28 11:06:29.476 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 11:06:29.476 ArtNet finished and updater thread stopped. 2018.09.28 11:06:29.476 PinControl finished and updater thread stopped. 2018.09.28 11:06:29.476 Finishing cabinet 2018.09.28 11:06:29.476 Debug: Finishing output controllers 2018.09.28 11:06:29.476 Debug: Output controllers finished 2018.09.28 11:06:29.476 Cabinet finished 2018.09.28 11:06:29.480 Debug: Disposing LedWiz instance 01. 2018.09.28 11:06:29.481 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
outhere Posted September 28, 2018 Share Posted September 28, 2018 45 minutes ago, CaptainYell0wJacket99 said: You did load the software on the Teensy board to run the LED strips ? - Well, I found the first problem. I was missing a space in my <Cabinet....> tag (instance" xmlns:"). Still getting an error, but it appears to be making it farther than it was.... DirectOutput.log: DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.28 11:05:51.292 DirectOutput Logger initialized 2018.09.28 11:05:51.180 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.28 11:05:51.182 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.28 11:05:51.182 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.28 11:05:51.183 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.28 11:05:51.184 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.28 11:05:51.184 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.28 11:05:51.185 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.28 11:05:51.273 Finishing framework 2018.09.28 11:05:51.274 Finishing cabinet 2018.09.28 11:05:51.274 Debug: Finishing output controllers 2018.09.28 11:05:51.274 Debug: Output controllers finished 2018.09.28 11:05:51.274 Cabinet finished 2018.09.28 11:05:51.274 DirectOutput framework finished. 2018.09.28 11:05:51.274 Bye and thanks for using! 2018.09.28 11:05:51.276 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.28 11:05:51.292 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.28 11:05:51.292 Loading Pinball parts 2018.09.28 11:05:51.292 Loading cabinet 2018.09.28 11:05:51.293 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.28 11:05:51.372 1 output controller defnitions and 3 toy definitions loaded from cabinet config. 2018.09.28 11:05:51.372 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig. 2018.09.28 11:05:51.372 Cabinet auto configuration started 2018.09.28 11:05:51.395 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.28 11:05:51.403 Opening 32-bit LedWiz driver... 2018.09.28 11:05:51.403 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.28 11:05:51.403 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.28 11:05:51.405 Cabinet auto configuration finished 2018.09.28 11:05:51.405 Autoconfig complete. 2018.09.28 11:05:51.405 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml 2018.09.28 11:05:51.405 Cabinet loaded 2018.09.28 11:05:51.405 Loading table config 2018.09.28 11:05:51.405 No TableFilename specified, will use empty tableconfig 2018.09.28 11:05:51.405 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.28 11:05:51.407 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.28 11:05:51.410 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.28 11:05:51.681 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.28 11:05:51.683 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.28 11:05:51.913 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.28 11:05:51.914 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.28 11:05:51.930 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.28 11:05:51.931 Pinball parts loaded 2018.09.28 11:05:51.931 Starting processes 2018.09.28 11:05:51.931 Initializing cabinet 2018.09.28 11:05:51.931 Debug: Initializing output controllers 2018.09.28 11:05:51.934 TeensyStripController LedStripController intialized and updater thread started. 2018.09.28 11:05:51.934 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:51.934 TeensyStripController LedStripController updater thread started. 2018.09.28 11:05:51.935 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:51.935 Debug: Output controllers initialized 2018.09.28 11:05:51.935 Updater thread for LedWiz 01 started. 2018.09.28 11:05:51.939 Cabinet initialized 2018.09.28 11:05:51.941 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.28 11:05:51.968 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.969 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.28 11:05:51.975 Framework initialized. 2018.09.28 11:05:51.975 Have fun! 2018.09.28 11:05:51.985 Initializing cabinet 2018.09.28 11:05:51.985 Debug: Initializing output controllers 2018.09.28 11:05:51.985 Debug: Output controllers initialized 2018.09.28 11:05:51.985 Cabinet initialized 2018.09.28 11:05:51.995 Opening 32-bit LedWiz driver... 2018.09.28 11:05:51.995 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:51.995 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:51.995 Opening 32-bit LedWiz driver... 2018.09.28 11:05:52.444 EXCEPTION: TeensyStripController LedStripController updater thread could not connect to the controller. Thread will quit. 2018.09.28 11:05:52.444 EXCEPTION: Thread: TeensyStripController LedStripController updater thread 2018.09.28 11:05:52.444 EXCEPTION: Message: IOException --> The semaphore timeout period has expired. 2018.09.28 11:05:52.444 2018.09.28 11:05:52.444 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count) 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController() 2018.09.28 11:05:52.448 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt() 2018.09.28 11:05:52.448 EXCEPTION: Targetsite: Void WinIOError(Int32, System.String) 2018.09.28 11:05:53.246 Debug: Disposing LedWiz instance 01. 2018.09.28 11:05:53.978 Finishing framework 2018.09.28 11:05:53.979 Finishing cabinet 2018.09.28 11:05:53.980 Debug: Finishing output controllers 2018.09.28 11:05:53.980 TeensyStripController LedStripController finished and updater thread stopped. 2018.09.28 11:05:53.980 Debug: Finishing LedWiz Nr. 01 2018.09.28 11:05:53.980 Updater thread for LedWiz 01 terminated. 2018.09.28 11:05:53.991 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 11:05:53.991 Debug: Output controllers finished 2018.09.28 11:05:53.991 Cabinet finished 2018.09.28 11:05:53.991 DirectOutput framework finished. 2018.09.28 11:05:53.991 Bye and thanks for using! 2018.09.28 11:05:53.991 Initializing cabinet 2018.09.28 11:05:53.991 Debug: Initializing output controllers 2018.09.28 11:05:53.991 Debug: Output controllers initialized 2018.09.28 11:05:53.991 Cabinet initialized 2018.09.28 11:05:54.003 Opening 32-bit LedWiz driver... 2018.09.28 11:05:54.003 Debug: Initializing LedWiz Nr. 01 2018.09.28 11:05:54.003 Updater thread for LedWiz 01 started. 2018.09.28 11:05:54.004 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 11:05:54.004 Opening 32-bit LedWiz driver... 2018.09.28 11:05:54.258 Debug: Disposing LedWiz instance 01. 2018.09.28 11:05:56.281 Debug: Disposing LedWiz instance 01. 2018.09.28 11:06:29.464 ArtNet finished and updater thread stopped. 2018.09.28 11:06:29.464 PinControl finished and updater thread stopped. 2018.09.28 11:06:29.464 Debug: Finishing LedWiz Nr. 01 2018.09.28 11:06:29.464 Updater thread for LedWiz 01 terminated. 2018.09.28 11:06:29.476 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.28 11:06:29.476 ArtNet finished and updater thread stopped. 2018.09.28 11:06:29.476 PinControl finished and updater thread stopped. 2018.09.28 11:06:29.476 Finishing cabinet 2018.09.28 11:06:29.476 Debug: Finishing output controllers 2018.09.28 11:06:29.476 Debug: Output controllers finished 2018.09.28 11:06:29.476 Cabinet finished 2018.09.28 11:06:29.480 Debug: Disposing LedWiz instance 01. 2018.09.28 11:06:29.481 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Yes, the software is loaded for the Teensy board. When I run the test example in the Arduino app, the lights function as expectted and show as connected to COM6. When I say software, it is the Arduino and Teensy apps/libraries on my desktop PC. I updated the hex file on the teensy as well per the instructions. Do I need to open a specific file, compile and load it onto the Teensy as well? (similar to what I did to run the Example test display). Link to comment Share on other sites More sharing options...
outhere Posted September 28, 2018 Share Posted September 28, 2018 23 minutes ago, CaptainYell0wJacket99 said: Yes, the software is loaded for the Teensy board. When I run the test example in the Arduino app, the lights function as expectted and show as connected to COM6. When I say software, it is the Arduino and Teensy apps/libraries on my desktop PC. I updated the hex file on the teensy as well per the instructions. Do I need to open a specific file, compile and load it onto the Teensy as well? (similar to what I did to run the Example test display). It has been a while but I believe this is what I used when I bought my board Go down to installation of Firmware https://github.com/DirectOutput/TeensyStripController/wiki/Software:-Teensy-Firmware This is my GlobalConfig_B2SServer.xml and cabinet.xml files a little different then yours DOF Mine is on the E drive I have more addressed lights than you do and I used a separate wire from the cat cable for each strip You must have yours wired where you hooked the cat cable on the 1st strip and then hook the 2 LED strips together - which should work https://www.vpforums.org/index.php?showtopic=36156&p=412909 This My Addressable setup https://www.vpforums.org/index.php?showtopic=36156&p=412974 Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 Thanks for posting your config and cabinet files. The only thing I needed to add was the following line: <ShapeDefintionFilePattern>E:\DirectOutput\config\DirectOutputShapes.xml</ShapeDefintionFilePattern> Unfortunately, that didn't resolve the problem. Based on the above log, it appears the teensy isn't being recognized. At this point, I have no idea why. Teensy and lights work just fine within Teensy/Arduino app and show using COM6. I'm at a loss. Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 28, 2018 Share Posted September 28, 2018 I'm wondering if the following error messages are related to my cabinet.xml TeensyStripController name and my setup in DOF Config Tool. 2018.09.28 17:20:46.089 Warning: The specified Com-Port COM6 was not found. Available com-ports: 2018.09.28 17:20:46.089 Warning: Settings for TeensyStripController LedStripController are not correct. Cant initialize. 2018.09.28 17:20:46.089 Debug: Initializing LedWiz Nr. 01 2018.09.28 17:20:46.090 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.28 17:20:46.090 Debug: Output controllers initialized 2018.09.28 17:20:46.090 Updater thread for LedWiz 01 started. 2018.09.28 17:20:46.093 Cabinet initialized Cabinet.xml exert: <OutputControllers> <TeensyStripController> <Name>LedStripController</Name> <NumberOfLedsStrip1>144</NumberOfLedsStrip1> <NumberOfLedsStrip2>0</NumberOfLedsStrip2> <NumberOfLedsStrip3>0</NumberOfLedsStrip3> <NumberOfLedsStrip4>0</NumberOfLedsStrip4> <NumberOfLedsStrip5>0</NumberOfLedsStrip5> <NumberOfLedsStrip6>0</NumberOfLedsStrip6> <NumberOfLedsStrip7>0</NumberOfLedsStrip7> <NumberOfLedsStrip8>0</NumberOfLedsStrip8> <ComPortName>COM6</ComPortName> </TeensyStripController> </OutputControllers> Here is a screenshot of my Teensy setup in DOF. DOF Config.bmp Link to comment Share on other sites More sharing options...
outhere Posted September 28, 2018 Share Posted September 28, 2018 Where is that log come from? If you plug in and unplug the USB cable Does com port 6 come and go? Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 Where it says doflinx That is The spot where the rom name for the game you are loading is supposed to be I have no idea why it's putting that in their 2018.09.28 11:05:51.405 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 4 hours ago, outhere said: Where is that log come from? If you plug in and unplug the USB cable Does com port 6 come and go? The log is an exert from my DirectOutput.log. Yes. the Teensy is showing as port 6 when plugged/unplugged. Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 4 hours ago, outhere said: Where it says doflinx That is The spot where the rom name for the game you are loading is supposed to be I have no idea why it's putting that in their 2018.09.28 11:05:51.405 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx I believe it is putting that in there because this is the log from starting up DOF only. I haven't loaded a game at this point, so it defaults to doflinx. The above error happens when I start up DOF. Figure I need to fix this and there is no point in loading a table too at this point. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now