Jump to content
Content Creator Status Updates - Please stop asking and begging for Content Creator Status. (Click Here) ×

Addressable Rgb's

randr

By randr
in Direct Output Support

 Share

Recommended Posts

  • Replies 565
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

swisslizard
swisslizard

Hi guys   I'm just about to leave for vacation. Last thing before I leave, here is a preview of DOF R3: http://pinball.weilenmann.net/DirectOutput_V0.9_Build_5750.13397.zip Keep in mind, that this

swisslizard
swisslizard

@Westworld: If you want to connect a lot of leds Artnet is maybe not the best option, since you will need a separate Artnet Universe for every 170 leds. This will make the cabinet config more complex

swisslizard
swisslizard

Good news! Got the Teensy this morning. Implementing the firmware and some additions for DOF have been surprisingly easy to do.   Teensy will definitively be supported by DOF. There is still some

Posted Images

outhere Veteran

outhere

Posted
Posted 
In one of your logs you state this

I started DOF and opened my ACDC Luci table and then closed everything 

You should not have to start dof separate, it will start automatically when you play a game

If you go to the VP editor Load the game and start a game from there and then close it,  What does the log say then?

 

Link to comment
Share on other sites
CaptainYell0wJacket99

CaptainYell0wJacket99

Posted
Posted

So maybe I'm misunderstanding the steps....My impression was that I needed to start DOF (or have Windows do so as part of WIn startup) before launching my front end (Pinup Popper) and tables.  I don't have it set to start and win startup yet so I start it manually.  The last error I showed above was from when I started DOF for the first time after Win startup.  I can generate a log for either scenario (with or without launching a table), but figured if I'm getting the error at initial startup of DOF, then I need to address that before bothering to attempt with a table.  Please let me know if my assumptions are incorrect.  Sorry for the confusion.

Link to comment
Share on other sites
outhere Veteran

outhere

Posted
Posted
21 minutes ago, CaptainYell0wJacket99 said:

So maybe I'm misunderstanding the steps....My impression was that I needed to start DOF (or have Windows do so as part of WIn startup) before launching my front end (Pinup Popper) and tables.  I don't have it set to start and win startup yet so I start it manually.  The last error I showed above was from when I started DOF for the first time after Win startup.  I can generate a log for either scenario (with or without launching a table), but figured if I'm getting the error at initial startup of DOF, then I need to address that before bothering to attempt with a table.  Please let me know if my assumptions are incorrect.  Sorry for the confusion. 

Let's try this do a fresh boot of the computer and then

go to the VP editor Load the game and start the game then close it, then post the log...
Link to comment
Share on other sites
CaptainYell0wJacket99

CaptainYell0wJacket99

Posted
Posted
15 minutes ago, outhere said: 

Let's try this do a fresh boot of the computer and then


go to the VP editor Load the game and start the game then close it, then post the log...

I just rebooted and ran VP editor, loading and running the ACDC Luci table.  It did not create the DirectOutput.log file because DOF is not currently setup to start with Windows boot.  I would need to manually start DOF before loading VP editor.  I ran VP editor again after starting DOF and here is the log (Log includes start up of DOF and then loading and running of ACDC table.

DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2018.09.29 10:39:27.711    DirectOutput Logger initialized
2018.09.29 10:39:27.615    Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok
2018.09.29 10:39:27.617    Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok
2018.09.29 10:39:27.618    Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok
2018.09.29 10:39:27.618    Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok
2018.09.29 10:39:27.619    Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok
2018.09.29 10:39:27.619    Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok
2018.09.29 10:39:27.620    Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok
2018.09.29 10:39:27.695    Finishing framework
2018.09.29 10:39:27.696    Finishing cabinet
2018.09.29 10:39:27.697    Debug: Finishing output controllers
2018.09.29 10:39:27.697    Debug: Output controllers finished
2018.09.29 10:39:27.697    Cabinet finished
2018.09.29 10:39:27.697    DirectOutput framework finished.
2018.09.29 10:39:27.697    Bye and thanks for using!
2018.09.29 10:39:27.699    Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml"
2018.09.29 10:39:27.712    Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml
2018.09.29 10:39:27.712    Loading Pinball parts
2018.09.29 10:39:27.712    Loading cabinet
2018.09.29 10:39:27.712    Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2018.09.29 10:39:27.782    1 output controller defnitions and 3 toy definitions loaded from cabinet config.
2018.09.29 10:39:27.782    Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2018.09.29 10:39:27.783    Cabinet auto configuration started
2018.09.29 10:39:27.866    PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2018.09.29 10:39:27.873    Opening 32-bit LedWiz driver...
2018.09.29 10:39:27.873    Detected and added LedWiz Nr. 1 with name LedWiz 01
2018.09.29 10:39:27.873    Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1
2018.09.29 10:39:27.876    Cabinet auto configuration finished
2018.09.29 10:39:27.876    Autoconfig complete.
2018.09.29 10:39:27.876    Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2018.09.29 10:39:27.876    Cabinet loaded
2018.09.29 10:39:27.876    Loading table config
2018.09.29 10:39:27.876    No TableFilename specified, will use empty tableconfig
2018.09.29 10:39:27.876    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx
2018.09.29 10:39:27.877    Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini
2018.09.29 10:39:27.880    Min DOF Version is 0.8 for file directoutputconfig.ini
2018.09.29 10:39:28.135    Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2018.09.29 10:39:28.137    Min DOF Version is 0.8 for file directoutputconfig30.ini
2018.09.29 10:39:28.365    2 directoutputconfig.ini or ledcontrol.ini files loaded.
2018.09.29 10:39:28.366    Config for RomName doflinx exists in LedControl data. Updating cabinet and config.
2018.09.29 10:39:28.382    Table config loading finished: romname=doflinx, tablename=doflinx
2018.09.29 10:39:28.383    Pinball parts loaded
2018.09.29 10:39:28.383    Starting processes
2018.09.29 10:39:28.383    Initializing cabinet
2018.09.29 10:39:28.384    Debug: Initializing output controllers
2018.09.29 10:39:28.384    Warning: The specified Com-Port COM6 was not found. Available com-ports: COM5
2018.09.29 10:39:28.384    Warning: Settings for TeensyStripController LedStripController are not correct. Cant initialize.
2018.09.29 10:39:28.384    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:39:28.385    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:39:28.386    Debug: Output controllers initialized
2018.09.29 10:39:28.386    Updater thread for LedWiz 01 started.
2018.09.29 10:39:28.389    Cabinet initialized
2018.09.29 10:39:28.390    Loading shape definition file: C:\DirectOutput\config\DirectOutputShapes.xml
2018.09.29 10:39:28.422    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:39:28.423    Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:39:28.424    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:39:28.430    Framework initialized.
2018.09.29 10:39:28.430    Have fun! :)
2018.09.29 10:39:28.440    Initializing cabinet
2018.09.29 10:39:28.440    Debug: Initializing output controllers
2018.09.29 10:39:28.440    Debug: Output controllers initialized
2018.09.29 10:39:28.440    Cabinet initialized
2018.09.29 10:39:28.450    Opening 32-bit LedWiz driver...
2018.09.29 10:39:28.450    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:39:28.450    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:39:28.450    Opening 32-bit LedWiz driver...
2018.09.29 10:39:29.698    Debug: Disposing LedWiz instance 01.
2018.09.29 10:39:30.433    Finishing framework
2018.09.29 10:39:30.433    Finishing cabinet
2018.09.29 10:39:30.434    Debug: Finishing output controllers
2018.09.29 10:39:30.434    TeensyStripController LedStripController finished and updater thread stopped.
2018.09.29 10:39:30.434    Debug: Finishing LedWiz Nr. 01
2018.09.29 10:39:30.434    Updater thread for LedWiz 01 terminated.
2018.09.29 10:39:30.446    LedWiz Nr. 01 finished and updater thread stopped.
2018.09.29 10:39:30.446    Debug: Output controllers finished
2018.09.29 10:39:30.446    Cabinet finished
2018.09.29 10:39:30.446    DirectOutput framework finished.
2018.09.29 10:39:30.446    Bye and thanks for using!
2018.09.29 10:39:30.446    Initializing cabinet
2018.09.29 10:39:30.446    Debug: Initializing output controllers
2018.09.29 10:39:30.446    Debug: Output controllers initialized
2018.09.29 10:39:30.446    Cabinet initialized
2018.09.29 10:39:30.456    Opening 32-bit LedWiz driver...
2018.09.29 10:39:30.456    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:39:30.457    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:39:30.457    Updater thread for LedWiz 01 started.
2018.09.29 10:39:30.457    Opening 32-bit LedWiz driver...
2018.09.29 10:39:30.704    Debug: Disposing LedWiz instance 01.
2018.09.29 10:39:32.704    Debug: Disposing LedWiz instance 01.
2018.09.29 10:40:22.215    ArtNet  finished and updater thread stopped.
2018.09.29 10:40:22.215    PinControl  finished and updater thread stopped.
2018.09.29 10:40:22.215    Debug: Finishing LedWiz Nr. 01
2018.09.29 10:40:22.215    Updater thread for LedWiz 01 terminated.
2018.09.29 10:40:22.227    LedWiz Nr. 01 finished and updater thread stopped.
2018.09.29 10:40:22.227    ArtNet  finished and updater thread stopped.
2018.09.29 10:40:22.227    PinControl  finished and updater thread stopped.
2018.09.29 10:40:22.227    Finishing cabinet
2018.09.29 10:40:22.227    Debug: Finishing output controllers
2018.09.29 10:40:22.227    Debug: Output controllers finished
2018.09.29 10:40:22.227    Cabinet finished
2018.09.29 10:40:22.232    Debug: Disposing LedWiz instance 01.
2018.09.29 10:40:22.233    Debug: Disposing LedWiz instance 01.
 

Link to comment
Share on other sites
outhere Veteran

outhere

Posted
Posted

How are you manually starting  DOF ?

-

In your GlobalConfig_B2SServer.xml  Change this line

<LogFilePattern>.\DirectOutput.log</LogFilePattern>

TO  <LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern>

Then try this again 

Let's try this do a fresh boot of the computer and then

go to the VP editor Load the game and start the game then close it, then post the log...
Link to comment
Share on other sites
CaptainYell0wJacket99

CaptainYell0wJacket99

Posted
Posted

Something is definitely amiss.  I restarted my PC again and did the exact same thing and this is the log now.    Main difference is that the first time I restarted, my LED strip was not lit and no COM port was showing in Devices and Printers.  In the second test/restart, I unplugged the Teensy and replugged it back in.  It immediately lit up and  shows COM6.  Here is the second log file.  Any ideas.   I'm wondering if there is a COM port issue with my Jeb Plunger or something else???

DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2018.09.29 10:47:02.249    DirectOutput Logger initialized
2018.09.29 10:47:02.160    Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok
2018.09.29 10:47:02.162    Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok
2018.09.29 10:47:02.163    Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok
2018.09.29 10:47:02.163    Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok
2018.09.29 10:47:02.164    Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok
2018.09.29 10:47:02.164    Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok
2018.09.29 10:47:02.165    Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok
2018.09.29 10:47:02.233    Finishing framework
2018.09.29 10:47:02.234    Finishing cabinet
2018.09.29 10:47:02.234    Debug: Finishing output controllers
2018.09.29 10:47:02.234    Debug: Output controllers finished
2018.09.29 10:47:02.234    Cabinet finished
2018.09.29 10:47:02.234    DirectOutput framework finished.
2018.09.29 10:47:02.234    Bye and thanks for using!
2018.09.29 10:47:02.236    Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml"
2018.09.29 10:47:02.249    Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml
2018.09.29 10:47:02.249    Loading Pinball parts
2018.09.29 10:47:02.249    Loading cabinet
2018.09.29 10:47:02.250    Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2018.09.29 10:47:02.320    1 output controller defnitions and 3 toy definitions loaded from cabinet config.
2018.09.29 10:47:02.320    Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2018.09.29 10:47:02.321    Cabinet auto configuration started
2018.09.29 10:47:02.344    PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2018.09.29 10:47:02.351    Opening 32-bit LedWiz driver...
2018.09.29 10:47:02.351    Detected and added LedWiz Nr. 1 with name LedWiz 01
2018.09.29 10:47:02.352    Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1
2018.09.29 10:47:02.354    Cabinet auto configuration finished
2018.09.29 10:47:02.354    Autoconfig complete.
2018.09.29 10:47:02.354    Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2018.09.29 10:47:02.354    Cabinet loaded
2018.09.29 10:47:02.354    Loading table config
2018.09.29 10:47:02.354    No TableFilename specified, will use empty tableconfig
2018.09.29 10:47:02.354    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx
2018.09.29 10:47:02.355    Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini
2018.09.29 10:47:02.359    Min DOF Version is 0.8 for file directoutputconfig.ini
2018.09.29 10:47:02.617    Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2018.09.29 10:47:02.619    Min DOF Version is 0.8 for file directoutputconfig30.ini
2018.09.29 10:47:02.848    2 directoutputconfig.ini or ledcontrol.ini files loaded.
2018.09.29 10:47:02.849    Config for RomName doflinx exists in LedControl data. Updating cabinet and config.
2018.09.29 10:47:02.865    Table config loading finished: romname=doflinx, tablename=doflinx
2018.09.29 10:47:02.866    Pinball parts loaded
2018.09.29 10:47:02.866    Starting processes
2018.09.29 10:47:02.866    Initializing cabinet
2018.09.29 10:47:02.866    Debug: Initializing output controllers
2018.09.29 10:47:02.868    TeensyStripController LedStripController intialized and updater thread started.
2018.09.29 10:47:02.868    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:47:02.869    TeensyStripController LedStripController updater thread  started.
2018.09.29 10:47:02.869    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:47:02.869    Debug: Output controllers initialized
2018.09.29 10:47:02.870    Updater thread for LedWiz 01 started.
2018.09.29 10:47:02.873    Cabinet initialized
2018.09.29 10:47:02.874    Loading shape definition file: C:\DirectOutput\config\DirectOutputShapes.xml
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19)
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19)
2018.09.29 10:47:02.906    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:47:02.907    Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15)
2018.09.29 10:47:02.913    Framework initialized.
2018.09.29 10:47:02.913    Have fun! :)
2018.09.29 10:47:02.919    Initializing cabinet
2018.09.29 10:47:02.919    Debug: Initializing output controllers
2018.09.29 10:47:02.919    Debug: Output controllers initialized
2018.09.29 10:47:02.919    Cabinet initialized
2018.09.29 10:47:02.923    Opening 32-bit LedWiz driver...
2018.09.29 10:47:02.923    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:47:02.923    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:47:02.923    Opening 32-bit LedWiz driver...
2018.09.29 10:47:03.377    EXCEPTION: TeensyStripController LedStripController updater thread  could not connect to the controller. Thread will quit.
2018.09.29 10:47:03.377    EXCEPTION: Thread: TeensyStripController LedStripController updater thread 
2018.09.29 10:47:03.377    EXCEPTION: Message: IOException --> The semaphore timeout period has expired.
2018.09.29 10:47:03.377    
2018.09.29 10:47:03.377    
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult)
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout)
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count)
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController()
2018.09.29 10:47:03.386    EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt()
2018.09.29 10:47:03.386    EXCEPTION: Targetsite: Void WinIOError(Int32, System.String)
2018.09.29 10:47:04.196    Debug: Disposing LedWiz instance 01.
2018.09.29 10:47:04.918    Finishing framework
2018.09.29 10:47:04.919    Finishing cabinet
2018.09.29 10:47:04.919    Debug: Finishing output controllers
2018.09.29 10:47:04.920    TeensyStripController LedStripController finished and updater thread stopped.
2018.09.29 10:47:04.920    Debug: Finishing LedWiz Nr. 01
2018.09.29 10:47:04.920    Updater thread for LedWiz 01 terminated.
2018.09.29 10:47:04.931    LedWiz Nr. 01 finished and updater thread stopped.
2018.09.29 10:47:04.931    Debug: Output controllers finished
2018.09.29 10:47:04.931    Cabinet finished
2018.09.29 10:47:04.931    DirectOutput framework finished.
2018.09.29 10:47:04.931    Bye and thanks for using!
2018.09.29 10:47:04.931    Initializing cabinet
2018.09.29 10:47:04.931    Debug: Initializing output controllers
2018.09.29 10:47:04.931    Debug: Output controllers initialized
2018.09.29 10:47:04.931    Cabinet initialized
2018.09.29 10:47:04.936    Opening 32-bit LedWiz driver...
2018.09.29 10:47:04.936    Debug: Initializing LedWiz Nr. 01
2018.09.29 10:47:04.936    LedWiz Nr. 01 initialized and updater thread initialized.
2018.09.29 10:47:04.936    Opening 32-bit LedWiz driver...
2018.09.29 10:47:04.936    Updater thread for LedWiz 01 started.
2018.09.29 10:47:05.202    Debug: Disposing LedWiz instance 01.
2018.09.29 10:47:07.202    Debug: Disposing LedWiz instance 01.
 

Link to comment
Share on other sites
outhere Veteran

outhere

Posted
Posted 
Try unplugging other things that might be using com port 6 or interfering with it...

Also try using a different USB port..
 This here still makes absolutely no sense

Where it says doflinx That is The spot where the rom name for the game you are loading is supposed to be
I have no idea why it's putting that in their

2018.09.28 11:05:51.405    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx

- 

The only time your LED strips should be lit is during a game or sometimes a frontend lights him up

 

Link to comment
Share on other sites
CaptainYell0wJacket99

CaptainYell0wJacket99

Posted
Posted
35 minutes ago, outhere said:

How are you manually starting  DOF ?

-

In your GlobalConfig_B2SServer.xml  Change this line

<LogFilePattern>.\DirectOutput.log</LogFilePattern>

TO  <LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern>

Then try this again 


Let's try this do a fresh boot of the computer and then


go to the VP editor Load the game and start the game then close it, then post the log...

I'm running C:\DirectOutput\DOFLinx.exe.

Link to comment
Share on other sites
CaptainYell0wJacket99

CaptainYell0wJacket99

Posted
Posted
11 minutes ago, outhere said: 

That is the wrong DOF for Visual Pinball
Let get it working in vp 1st

Well, some good news.  I removed the usb device in devices and printers and reconnected.  It is now working just fine with VP.  Haven't tested with FX3 or FP but will do so now.  Thanks for all your help.  Will let you know if I run into more problems.  

Link to comment
Share on other sites
  • 2 months later...
  • 2 months later...
adold

adold

Posted
Posted

So I register the the com port and it is successful.  I then copy the dll into the plugins folder of pinball x.  When i run the plugins manager it doesnt register the path and then gives me the error to make sure com port is registered...

Any thoughts?

 

Thanks

Anthony

Link to comment
Share on other sites
  • 2 years later...
BadBardo Newbie

BadBardo

Posted
Posted

hello guys, first of all I want to thank you for your immense contribution, without you I wouldn't have even started building a cabinet. I have a request for you ...i installed pinup popper, 3 monitors, a plunger with the klz25 and everything works great. arrived at this point I would have the desire to install 2 led strips of 144 led on the right and left with an 8x32 led matrix. i haven't installed DOF yet, i have a teensy 3.2 with WS2811 card. I have already tried to install everything following above all the directives of mameinabox .. but I could not make anything work, except the LEDs that once the teensy 3.2 is programmed remain always on. I have serious problems both with the DOF that I think must be installed before the program that controls the teensy 3.2, and with the file cabinet. i am italian and i don't know anything about programming. someone willing, could you make me an xml file for the cabinet and one for the generalconfig? I would like to try the installation of the led strips for one last time

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


About VPUniverse

VPUniverse is a site dedicated to digital pinball simulations and anything pinball in general. Our primary focus is on Digital Pinball formats including Visual Pinball, Future Pinball, and many more pinball simulators. All content is provided on this site for free to all registered members.

Subscriptions are available that allow additional perks; such as reduced download timers and increased download speeds.

Digital Pinball Network - Beware of frauds!

DPNetwork is a network of sites that are fully supported by the Virtual Pinball Community. Support those people who create the content and download ONLY from the following sites. The people that create the content for this hobby post only on the following sites. Any site not listed here; is NOT a vetted site. Always know what you are downloading and from where you are downloading from.

Trusted Sites:

Site Content & Disclaimer

All of the content on this site is created by our community members. Because our community members upload this content for free use; does not give ANYONE permission to re-host files, re-distribute, package, or sell any cabinets or drives with community created content.

By downloading from this site; you agree to not re-host community content, package or re-distribute in any form the content from this site. If you are caught; your membership on VPUniverse.com will be banned without refund.

Contact

VPUniverse Discord

×
×
  • Create New...