Jump to content

Transformers_V1.2_Vp9.9_Dt.zip


coolball

Recommended Posts

index.php?app=downloads&module=display&section=screenshot&id=3017

File Name: Transformers_v1.2_VP9.9_DT.zip

File Submitter: coolball

File Submitted: 19 Sep 2014

File Category: VPU Patching System - Table Modifications (DT)

Original Table Author: gtxjoe & freneticamnesic team

Original Table Version: Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt

Original Table Download:

Desktop Patch for Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt (coolball for the Desktop-Patch)

Thank you freneticamnesic and gtxjoe for the ultimate power of your table and the permission to mod.

Changes i´ve done

- added new Backdrop

- change the values to create a desktop version

- adjusts the flashers

Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod

http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/

Download the original Table: "Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt" / http://vpuniverse.com/forums/files/file/3013-transformers-pro-stern-2011-fs-vp99-gtxjoe-freneticamnesic/

Use the Mod: "Transformers_v1.2_VP9.9_DT.dif"

Have fun

To Apply a patch:

a. If you do not already have the table that the patch was created for; you will need to download that file.

Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.

b. Make sure that you are on the "Apply Patch" tab located at the top of the window.

c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.

d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.

e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.

f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.

If you have made any changes to the original table release then this patch will not work.

Click here to download this file

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
  • Create New...