Search the Community
Showing results for tags 'pindmd'.
Found 18 results
-
I bought a PinDMD 3 Color from Noah but the only colors I've seen are the UltraDMD America's Most Haunted and the default 4 colors from the F1 settings which are ugly. So I searched a lot on the available forums but I only see info or colorized roms for the Pin2DMD. Then I found this DL and thought yes finally : Colorized Rom Pack but I think those are for the Pin2DMD too... Does anyone have a PinDMD3 and have info or links on how to make it work?
-
Shield V3 (for RGB DMDs) - backside, with underside HUB75 Output
UncleSash posted a gallery image in Members Albums Category
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - on Board Button and GO-DMD Sensor header
UncleSash posted a gallery image in Members Albums Category
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - seriell port (RS232) with original MAXIM MAX232 IC
UncleSash posted a gallery image in Members Albums Category
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) front with no Controller
UncleSash posted a gallery image in Members Albums Category
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - during the assembly
UncleSash posted a gallery image in Members Albums Category
From the album: UncleSash Pin2DMD
© UncleSash
-
From the album: UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Version 11-29-2015
58 downloads
This helps you for Troubleshoot you LiBUSB Driver. Not needed when you use teh Zidag Driver from GitHub, that comes with the latetst Version of Pin2DMD. But also very usefull for the PinDMD2 (I had that Problem berfore with PinDMD2 and nobody, also Russ, was able to help me!) -
-
From the album: UncleSash Pin2DMD
finally produced... UncleSash´s Pin2DMD breakout board rev 1.2! just wait for the shipping... -
From the album: UncleSash Pin2DMD
1st Test RUN with the all new rev 1.1 PCB from UncleSash´s PreOrder for the Pin2DMD OpenSource Project!© UncleSash
-
From the album: UncleSash Pin2DMD
That is the official PinOut for the STm32F4 Discovery Board. The Pin Names (the ones in the WHITE boxes) are matching with them in the schematic from the Pin2DMD. -
From the album: UncleSash Pin2DMD
© UncleSash
-
From the album: UncleSash Pin2DMD
© UncleSash
-
From the album: UncleSash Pin2DMD
© UncleSash
-
Pindmd2 Has Stopped Showing Up In Device Drivers After Update...
paulohotline posted a topic in PinMAME Support
Hey guys Happy New Year, I hope you can guide me in the right direction to get my PINDMD2 working. I started getting crashes in PINMAME this AM when playing SAM tables. It started with ACDC then started happening with any SAM table. I actually had to reboot the PC to clear out the DMD. I had changed no hardware or software configs from the previous day of flawless operation. I re-installed the VPMame dll in case it got corrupt and re-downloaded the sam.vbs file. The tables continued to crash and lock up the PINDMD., I noticed on a reboot that my PINDMD2 was at Rev 584-16 and that a newer firmare was available - rev630-16-CLR.dfu - for my DMD. So I downloaded this manual - http://www.pindmd.com/AN004.pdfand began the process of updating my firware. I downloaded the latest firmware and ran setDFU.exe. It installed drivers in windows and now it shows up under Univeral Serial Bus Controllers as - STM Device in DFU Mode. (it may have been there before, I just noticed it now). I did not see the device when running the app - DfuSeDemo.exe as per the manual. I do see it in STDFUTester.exe. as - STM Device in DFU Mode I currently can no longer see PINDMD2 in Device Manager except in in the USB section. I cannot use pinDMD-CLR.exe to access as it gives me - error opening pinDMD2 device I cannot use pinDMDsettings.exe as it gives me - error opening device. I have tried to re-install the drivers in device manager with no success in getting the PINDMD2 to show up. I am going to stop trying to fix this PINDMD issue myself and see what you guys have to say. Anyone here a PINDMD2 expert that can help me out? I am stumped on how to proceed. -
Hi, I'm having problems with my pinDMD v1 and VPinMAME_3497_SAM_PINDMD1_UNITY_1.2. My real DMD works fine but it's displaying the software DMD too, I can turn it off in the script or through the Bb2S settings but it used to do this automatically. Is anyone else experiencing the same? edit: nevermind, got it sorted
