Search the Community
Showing results for tags 'dmd'.
Found 28 results
-
pin2dmd Pin2DMD installation - connect your Pin2DMD with your WiFi
UncleSash posted a file in Pin2DMD Documentation
-
dc-dc converter Pin2DMD installation - DC-DC Converter Shield
UncleSash posted a file in Pin2DMD Documentation
-
Version 1.0.5
2,142 downloads
DMD Videos for Frontends Can be used on any System! Either Monitor, real DMD or Pin2DMD Setup! Added in 1.0.0 - AC/DC - Metallica - Star Trek Stern - Indiana Jones Williams-
- 3
-
-
-
- pinballx dmd
- preview video
- (and 3 more)
-
I bought a PinDMD 3 Color from Noah but the only colors I've seen are the UltraDMD America's Most Haunted and the default 4 colors from the F1 settings which are ugly. So I searched a lot on the available forums but I only see info or colorized roms for the Pin2DMD. Then I found this DL and thought yes finally : Colorized Rom Pack but I think those are for the Pin2DMD too... Does anyone have a PinDMD3 and have info or links on how to make it work?
-
I saw in one of the other threads that people were looking to make frames to hold the 2 led segments, please post any ideas or designs here so they don't get lost within the other threads.
-
pin2dmd Pin2DMD with Signal Enhancer - General Schematic
UncleSash posted a file in Pin2DMD Documentation
Version 0.1
101 downloads
This is a General Schematic for the Pin2DMD with a STM32F407VGT6 Controller. includs: RGB DMD Output (HUB75) real Pinball DMD Input Signal Enancer for real DMD Input SD Card reader very Basic drawin but very usefull, to get all the Pins right. For more (like the Original Eagle file or correction in the Drawing), feel free to contact me. -
Version 1.0.0
367 downloads
That's are the Schematic and Layouts from my Shields. rev 1.2 (schematic and PCB Layout) rev 1.3 (schematic and PCB Layout) rev 1.4 (schematic and PCB Layout) rev 2.0a US (schematic and PCB Layout) rev 2.0c US (schematic and PCB Layout) because, I still believe in the OpenSource! When anybody wants or need the Eagla File, just send me a PM or go on my Facebook page and send me there a PM. I still have the OpenSource Code from the OLD Firmware version 1.37, also able to send it after a PM.. yeah it is Open Source and you don"t need a key! I like to upload the Open Source Version here, when the Admin will allow that to me. -
From the album UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - seriell port (RS232) with original MAXIM MAX232 IC
UncleSash posted a gallery image in Members Albums Category
From the album UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - on Board Button and GO-DMD Sensor header
UncleSash posted a gallery image in Members Albums Category
From the album UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Shield V3 (for RGB DMDs) - backside, with underside HUB75 Output
UncleSash posted a gallery image in Members Albums Category
From the album UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
From the album UncleSash Pin2DMD
Shield for a RGB-DMD Display 100% functional with the Pin2DMD Firmware has all the new funky stuff on it. direct hook to a dmd, wifi, seriell port (for smart dmd functions), real Pinball DMD Signal enhancer and GO-DMD useable!© UncleSash
-
Folks, I'm looking for the most compatible DMD display device. I am either thinking an LCD screen or a the pindmd V3 (color one). My question is: Is there a downside to pindmd V3 versus an LCD? I want to use all emulators in my cabinet: VP, FP, Pinball FX2, Pinball Arcade (with directx 11 mod which I don't know much about), etc I am unclear if all the emulators support pindmd or if say Pinball FX2 only supports placing their DMD onto a 3rd LCD screen, but not on a PinDMD V3. Thoughts?
-
Output Shield For Arduino Leonardo "led Wiz Clone"
UncleSash posted a question in Arduino Development
Hello Pinball Folks! Here is Sascha.... the #Pin2DMD Shield Hardware Designer. Here is another nice Shield for the LWClone2U Project. As DIY Set, Soldered Set, Single Parts or complete Set with Arduino Leonardo Maybe someone likes it and want to buy one or more. I made that Shield usually for myself as HIGH Current OUTPUT Driver Shield. You can connect everything to it! Shaker, Becan, LED, High Power LED's, Solenoids, etc. For use with any Inductive Load I recommend you my "Flyback Diode Shield" http://vpuniverse.com/forums/topic/2607-flyback-diode-board-for-solenoids/#entry29621 Tech Specs: 22 High Current Output Channels each Channel can run on a Different Voltage all components are THT (Through-hole technololgy) for aesy self repair easy to Install Here some nice Pictures from the Shield: Attached to the Leonardo Board: Test with RGb Strips: And now the Pricing... Oh no, not to expensive! Check the Parts and you see, it is not to expensive! Partlis / BOM: Leonardo OUT PCB - Partlist.pdf I am not a professional Salesman... this is still a Hobby! Set: Soldered PCB 4.00 USD = 1x PCB rev 1.0 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive) 5.00 USD = 1x Soldered 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw) Total: 30.00 USD + Shipping with USPS (rates on request, starts with 4.00 USD) Set: Complete PCB with Arduion Lenardo 9.00 USD = 1x Arduino Leonardo (with FREE LWClone2U Firmware) 4.00 USD = 1x PCB rev 1.0 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive) 5.00 USD = 1x Soldered 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw) Total: 39.00 USD + Shipping with USPS (rates on request, starts with 4.00 USD) Set: PCB DIY 4.00 USD = 1x PCB rev 1.0 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive) 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw) Total: 25.00 USD + Shipping with USPS (rates on request, starts with 4.00 USD) Parts ONLY - select here what ever you need and send me a PM with you wishes! 4.00 USD = 1x PCB rev 1.0 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive) 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw) + Shipping with USPS (rates on request, starts with 4.00 USD) And when anybody needs any Kind of PCB, just contact me. We can Design one and I made the Rest for you! Cheers Sascha -
From the album UncleSash Pin2DMD
HUB75 PinOut! Screenshot from the official Pin2DMD Schematic!© UncleSash
-
From the album UncleSash Pin2DMD
HUB75 Pinning on the PCB side! Screenshot from the official Pin2DMD PCB Layout!© UncleSash
-
How to Connect the Pin2DMD Hardware (Power Supply, DMD, Shield)
UncleSash posted a file in Pin2DMD Documentation
-
From the album UncleSash Pin2DMD
© UncleSash
-
From the album UncleSash Pin2DMD
© UncleSash
-
-
Pin2DMD - R/C Filter for real Pinball DMDs
UncleSash posted a gallery image in Members Albums Category
From the album UncleSash Pin2DMD
Layout from my new "real Pinball DMD" Filter circuit for use with rev 1.x Pin2DMD Shields. It is very usefull for the use with a DMD Input Signal from a real Pinball machine. The Filter is based on an Idea from Lucky1 and Steve45.© UncleSash
-
From the album Rappelbox's PIN2DMD
© Rappelbox
-
From the album Rappelbox's PIN2DMD
© Rappelbox
-
Test with screw Terminal and switch for 5V source
UncleSash posted a gallery image in Members Albums Category
From the album UncleSash Pin2DMD
Test with screw Terminal and switch for 5V source. Maybe in one of the next revisions, as a small upgrade© UncleSash
-
HI I have a two monitor setup and using Pinballx. I have around 80 games installed and all DMD roms are in the correct position on the backglass. I just installed some of the following Stern games Avatar, Xmen, 24, Big Buck Hunter , Tron and positioned the DMD on backglass. When I restarted these games the DMD is no longer on the backglass or the playfield. I can hear the sounds when I add coins and start the games. I use ALT TAB but cannot find the DMD. I have Terminator 3 and DMD is in correct location, Any info would be appreciated p1nbal3r
