Search the Community
Showing results for tags 'clock'.
Found 3 results
Welcome to UncleSash´s offical Pin2DMD order thread! Save money and just buy here in the Forum! All Parts are sold for almost the cost what I have to pay for it! Pin2DMD is invented by Lucky1 and Steve45! Pin2DMD Froum: http://vpuniverse.com/forums/forum/132-pin2dmd/ How to Order: Pick your components send me a PM with the Parts that you want and the destination Country! and I will send you a total When you don't know what you need, feel free to ask me with a PM! Shipping: Worldwide with USPS or any Carrierer that you want Payment: How: only with PayPal All Orders have to be paid in advanced when you place your Order! exceptions possible Firmware Version: rev 2.xy (the latest, need activation) - features all new functions for a perfect experience in real Pinball! FW Version 2.x activation: have to be made on www.Pin2DMD.com Start to Order here: Let's Start Shopping! Available rev 3.0 RGB-DMD Shield for Pin2DMD and GO-DMD: (12-09-2016 08:00 PM, ET) 2 pcs rev 3.0 SHIELD (PCBs) in stock V3.1 - front view with Controller: V3.1 back of the shield: The GO-DMD is not available right now, but PreOrders are accepted!!!! I have to wait on the IR-remote (comes from China, I got one expensive from the US to test it, same model but 3 times so expensive as the one that is on the way) and some other headers to connect the Sensors (comes from a big electornic seller in the USA, like the most parts on the board) But here is a small priciing chart: (only the Shield, NO Controller included, Controller cost 25.50 USD) (NUMBER is euqal SET) 6,00 USD = V3 Shield - with out any parts -> PCB ONLY !!!! NO Controller included + shipping costs 20,00 USD = V3 Shield - as Pin2DMD V-Pin / real Pin ONLY Parts (inludes WiFi module and RS232 interface), NO Controller included + shipping costs 30,00 USD = V3 Shield - as Pin2DMD V-Pin / real Pin + soldered & tested (inludes WiFi module and RS232 interface), NO Controller included + shipping costs 38.50 USD = V3 Shield - Go-DMD Edititon ( like as Pin2DMD edition + GO-DMD Sensors and IR remote) + soldered & tested (works also as Pin2DMD), NO Controller included + shipping costs 26.50USD = V3 Shield GO-DMD basic Shield (NO wifi, NO rs232, NO real Pinball input) with all GO-DMD Sensors and IR remote (possibel to solder the missing parts by yourself to get a Pin2DMD Version!!!) + soldered & tested 55.50 USD = V3 Shield - as Pin2DMD V-Pin / real Pin inclusive Controller + soldered & tested (inludes WiFi module and RS232 interface) + shipping costs 64.00 USD = V3 Shield - Go-DMD Edititon inclusive Controller + shipping costs Plus Shipping costs: 7.00 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box 25.00 USD = Shipping to Canada with USPS Priority Mail Small Flat Rate Box 34.00 USD = Shipping WORLD with USPS Priority Mail Small Flat Rate Box or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! Available rev 1.0 V-Pin Service Button Shield (black edition): (12-09-2016 08:00 PM, ET) 6 pcs rev 1.0 SHIELD in stock rev 1.0 black Edition V-Pin Service Button Shield example pack with all parts, except the PCB Stand offs: Shield and Parts for rev 1.0 PCB: 3.00 USD Parts: 5.50 USD (includes all parts, also mercury switch) Parts NO mercury switch: 4.60 USD assembly service: 5.00 USD PCB Standoffs: 2.00 USD Plus Shipping costs: 3.00 USD = domestic USPS first clas package 7.00 USD = domestic USPS Priority Mail (1-3 days) Small Flat Rate Box or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! !!! DISCOUNT for ALL rev 2.0 SETs !!! SOLD OUT! sorry! We need more for DIY???? write me a PM, when we reach 5 pcs, I will Order a new batch! Available rev 2.0 Shield (white edition): (12-09-2016 08:00 PM, ET) 0 pcs rev 2.0 SHIELD in stock Sets for rev 2.0 Offer Set1: Complete rev 2 Shield with Controller and latest FW (OpenSource FW on request) NEW Price: 42.00 USD + Shipping (20% discount, thats are 10 USD less than regular) Offer Set2: rev 2 Shield complete assembeld and tested (NO Controller) NEW Price: 16.50 USD + shipping (24% discount, still 10 USD off!!!) Offer Set3: rev 2.0 Shield with all parts, DIY soldering NEW Price: 11.50 USD + shipping (30% discount, 5.00 USD off!!!) Plus Shipping costs: 7.00 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box 25.00 USD = Shipping to Canada with USPS Priority Mail Small Flat Rate Box 34.00 USD = Shipping WORLD with USPS Priority Mail Small Flat Rate Box or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! Available STm32F4 Controllers: (12-09-2016 08:00 PM, ET) 4 in Stock, more on the way (from US Store, 3 days delivery time) STM Controller hooked to a rev 2.0 Shield: Controllers: (select your Products, Controller + FW Version!) 25.50 USD each = Stm32F407 VGT6 "DISC1" Board (21.17 Controller (Digi-Key) + TAX + Shipping + 0.50 for Sascha) 0.00 USD = Pin2DMD Firmware Version preloaded (need activation) Plus Shipping costs: 7.00 USD = Shipping inside US with USPS Priority Mail[emoji769] Small Flat Rate Box 25.00 USD = Shipping to Canada with USPS Priority Mail[emoji769] Small Flat Rate Box 34.00 USD = Shipping WORLD with USPS Priority Mail[emoji769] Small Flat Rate Box or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! What you still need by yourself: 1x USB 2.0 Cable: Type-A male to Type-B MICRO male, like from your old android Phone, it is for Data transfer to PinMame or Config Tool 1x USB 2.0 Cable: Type-A male to Type-B MINI male), like from your old external 2.5" USB Harddrive, it is for Download the Firmware and to Power the Board (when no ext. source is connected) 1x 128x64 pixel P2.5 RGB 1/16 scan LED Module (2x 64x32 pixel, or 1x 64x64 pixel 1/16 scan to detache them) 5V DC, 10 A, Power Supply micro SD Card (1Gb to 16GB ist tested) I think that´s all what you need. The ribbon cables, to connect the display, comes with the display along with Power connectors. Check my Pin2DMD Album for Images: Download the actual Install Instructions: You find all insturctions here in the Download Section: http://vpuniverse.com/forums/files/category/85-pin2dmd-documentation/ now have fun with your personal Pin2DMD!
7 downloadsThis is just a brain storm of mine. It is not a pinball table, it is a clock. I was inspired by a Word clock that I saw on the internet. I took it even further and added other features to this clock. Every five minutes the word time changes, so when you first start the clock, you may not see anything happen until it reaches the nearest 5 minute increment (00, 05, 10, 15, etc...). Here are the features of this clock. Displays a background of the Palace of Westminster in London, England. Animated water scene. Gradual Day to Night and Night to Day images which change on the hour. Ambient sounds, listen to water, birds, and crickets during night hours. Big Ben chimes rings out every 15 minutes and strike the hour on the hour. Word Clock, every 5 minutes the clock will light the words to say the current time. Talking Clock, using windows built in sapi text to speech, Every 5 minutes you will hear the time being spoken. Clock hands on the tower actually work and change every minute. NOTE: Through script you can change the sapi voice used with the clock. Windows normally comes with a couple of built in sapi voices and these change with versions. For instance, on Windows 10, the default voice is the Cortana voice. Open the script editor in VP and look towards the to of the script for a comment on how to change the voice. If you increment the voice beyond what you have loaded, it will throw a "null" error, This simply means you went to far and ran out of sapi voices loaded on your computer. You can google search "windows sapi voices" to find some download to install more voices. Unfortunately, VP needs to have the focus for this clock to run. If you open and click on another program, the clock will be in like a paused state until you click on it again to give it the focus. This is a calming and relaxing program that you should run in the background when you just need to relax. I think its kind of cool, it's kind of like a screensaver that you can run when you aren't playing pinball or working on the PC. Enjoy.