Search the Community
Showing results for tags 'alpha'.
Found 1 result
Hello everyone First of all, thanks in advance to everyone helping me with this! I've been building a Pinball Cabinet for the past few months and I am getting close to "finishing" it. If you want to check it out, use this link. My Pinball Cabinet (updates to come when everything is working) I am currently experiencing two issues with the Direct Output Framework. One shall be addressed here, the other one in this post: DOF issue #2: No flasher-feedback with otherwise working PinballX plugin I've been trying to solve these issues myself for the past few days/weeks, but failed, since I am not very experienced with DOF yet. I do not know whether these two issues are related. --- DOF issue #1: PWM-output on 2nd LEDWiz not working correctly - All RGB toys connected to a 2nd LEDWiz do not output in the full color spectrum. Only 7 colors are possible (red, lime/green, blue, yellow, cyan, magenta, white). It seems that the LEDs three channels are either «ON» or «OFF» and that the PWM/intensity settings are not handled properly by my current DOF setup. - DOF toys affected on the 2nd LEDWiz: RGB flippers (ports 5,6,7), RGB magnasave left (ports 10,11,12), RGB magnasave right (ports, 13,14,15), RGB undercab complex (ports 25,26,27). Those are all RGB toys connected to the 2nd LEDWiz. - When triggered by other software tools (LEDWiz software by GGG, LEDBlinky) all of the above outputs/ports behave normally. When adjusting intensities with those tools, single output colors are dimmable. And using multiple outputs/ports with different intensities results in a wider color spectrum. This is why I believe that my issue is related to my DOF setup or DOF itself and not to my LEDWiz controllers or related hardware (Zebsboards). - RGB toys connected to the 1st LEDWiz are not affected by this issue and light in full color spectrum. Those toys are: 5 flasher outside left throughout 5 flasher outside right. Ports used: 1-15. - When adjusting the «Custom Brigthness» setting in the DOF Config Tool in the Ports assignment tab, the brightness of all my RGB toys adjust properly, but still only with 7 colors for those on the 2nd LEDWiz. --- Further information on this issue and my current DOF setup. - I use this DOF R3 Beta version: DOF R3 Beta Build 5812.27024. As far as I remember, I already had this issue when using DOF R2. - I use this B2S Server version: B2S Server. - I use a two identical GlobalConfig files (globalconfig_B2SServer.xml and globalconfig_PinballX.xml) and the ini-Files created by the DOF Config Tool (directoutputconfig.ini and directoutputconfig2.ini), but no Cabinet.xml or dedicated table config files. - For now I only use 2 LEDWiz, which are listed in the «My Account» tab of the DOF Config Tool. A Teensy is supposed to be added soon. --- Help required As stated above, I am not very familiar with DOF yet and don't see a way to solve this issue myself. That's why I need your help and would greatly appreciate it. I feel that this issue, and the other one mentioned above, are limiting my experience while playing my Pinball Cabinet. So, what can I do to help you guys to help me solve these issues? What additional information, logs, xml-Files, ini-Files, screenshots, videos etc. do you need? Or do you maybe already have a solution or know someone who had the same or similar issues? I'm looking forward to hearing from you guys. Thanks again in advance! --- Best regards from Switzerland fuzgi --- 1st Edit: I just figured out that when I use DirectOutputConfigTester.exe at least the under cab complex RGB toy changes its color (within the full spectrum) when enabling / pulsing different table effects.