Jump to content


  • Content count

  • Joined

  • Last visited

About Baronimg

  • Rank

Recent Profile Visitors

532 profile views
  1. OK! Tankyou!
  2. Today there are already memory mapping files for Pinball FX2 control other toys such as bumpers and shaker motor, would it be possible to create the same memory mapping system for TPA tables? Because the effects I'm having with Pinball FX2 using the mapped memory files is fantastic! I think it would be the same with TPA.
  3. Lwclone On Arduino Mega 2560

    Hello, I'm having some doubts about how to use the accelerometer in LWclone, just plug the x, y, z into which LWclone ports of the Mega 2560 Arduino? In the pinout that I have annotated for LWclone tells me that on the analog ports of a1 through a6, x-1, x-2, y-1, y-2, z-1, z-2. I was a little lost with that, in which arduino pin should I connect the X, Y and Z of the accelerometer sensor? Another question, in my CAB I have a shake engine, can the vibration affect the reading of the accelerometer and does it understand that we are giving TILT? Thank you very much!
  4. Lwclone On Arduino Mega 2560

    Rav, count on my help! If I can help in something, I'm available.
  5. Pin2000 Fp - Bam - Lwclone - 40/28/17

    Ending ... https://vimeo.com/156549197
  6. Lwclone On Arduino Mega 2560

    My CAB's FP BAM LWclone Working!!! https://vimeo.com/156549197 Enviado do meu iPhone usando Tapatalk
  7. Pin2000 Fp - Bam - Lwclone - 40/28/17

    Hello guys! I liked many ArtWorks I found here on the forum, but after studying some I ended up making my myself, then follow the result. My CAB is Pin2000 model, the head of it will have a rubberized finish in red. My cabinet will have FP, BAM, Ledwiz and Pinball X2. May the force be with you!
  8. Lwclone On Arduino Mega 2560

    FP were in the files, I found an update of the files in another forum, are exactly the same files. I replaced the files I had the new and simply worked! some bumpers are not triggering some relays, but that I should have to manually configure the settings of Ledwiz file, the outputs are tested and work very well. On the wires, I took apart an IDE connector of an old motherboard and pulled the pins same as the photo below, I soldered the wires on pins and plugged in Arduino doors. It was good. See the photo of my parent I'm adding an H bridge to control a shaking motor. but also want to control with the same bridge a gear motor. My H board has output for two different engines and provides up to 2A per channel. Should suffice. I bought 3 IC ULN2803 and will build a PCB driver board to connect the RGB LEDs to Lwclone doors. Do you have any tips on these?
  9. Lwclone On Arduino Mega 2560

    Well, I would like to thank everyone for the help! Especially Cyclemat, I can call VPinGOD !! Yesterday I managed to do my LWclone work seamlessly with FP. Today I started building my control board, thank you !! May the force be with you!
  10. Lwclone On Arduino Mega 2560

    Cyclemat, I would like to thank you all the help you gave me. You are a very kind person. thank you.
  11. Lwclone On Arduino Mega 2560

    OK!!! Did it !!!! I think I got !! kkkk
  12. Lwclone On Arduino Mega 2560

    avrdude: stk500v2_command(): command failed
  13. Lwclone On Arduino Mega 2560

    Now I'm starting to progress ... but I still have errors and can not test the card.