Jump to content

UncleSash

Content Provider
  • Content count

    628
  • Joined

  • Last visited

  • Days Won

    18

Everything posted by UncleSash

  1. Welcome to UncleSash´s offical Pin2DMD order thread! Save money and just buy here in the Forum! All Parts are sold for almost the cost what I have to pay for it! Pin2DMD is invented by Lucky1 and Steve45! Pin2DMD Froum: http://vpuniverse.com/forums/forum/132-pin2dmd/ How to Order: Select your matching Set or ask for a different combination send me a PM with the Set that you want and the destination Country and I will send you a total When you don't know what you need, feel free to ask me with a PM! Shipping: Worldwide with USPS or any Carrierer that you want Payment: How: only with PayPal All Orders have to be paid in advanced when you place your Order! exceptions possible Firmware Version: rev 2.xy (the latest, need activation) - features all new functions for a perfect experience in real Pinball! FW Version 2.x activation or/and Download: have to be made on www.Pin2DMD.com V4 Shield SALE is LIVE! V4 Shield with Nucleo Controller: V4 Shield with WiFi and ALL Go-DMD Headers (front) V4 Shield backside: V4 Shield with NO WiFi and NO GO-DMD Headers: V4 - DC-DC Convert - Set 5 or 6 (Input 6-35V DC - Output preadjusted: 5V DC 5Amps max.) V4 Supports XL DMDs for SEGA Machines! Start to Order here: V4 Set 1: Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi) WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 65.00 USD + Shipping V4 Set 2: Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball) WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 60.00 USD + Shipping V4 Set 3: DIY - Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi) NO soldering service!!! costs: 60.00 USD + Shipping V4 Set 4: DIY - Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball) NO soldering service!!! costs: 55.00 USD + Shipping V4 Set 5: DC-DC Converter (ready to use) DC-DC Stepdown XL4005 on Shield Screw terminals (variable to Pins, give me note when you Order) Input: 6-35V DC Output: variable, but preadjusted to 5V (max. 5A) costs: 9.00 USD + Shipping V4 Set 6: DC-DC Converter (DIY) DC-DC Stepdown XL4005 on Shield Input: 6-35V DC Output: variable, but preadjusted to 5V (max. 5A) costs: 6.50 USD + Shipping Plus Shipping costs: 7.50 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box (for one Set, when you have more as one, please ask me for pricing) or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! Frame for P2.5 DMD Panels 128x32 pixel (black acrylic): available Price for one Frame: Frame = 15.00 USD Plus Shipping costs: 7.50 USD = domestic USPS Priority Mail (1-3 days) Small Flat Rate Box (for one Frame, when you have more as one, please ask me) or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! What you still need by yourself: 1x USB 2.0 Cable: Type-A male to Type-B MICRO male, like from your old Android Phone, it is for Data transfer to PinMame or Config Tool 1x USB 2.0 Cable: Type-A male to Type-B MICRO male, like from your old Android Phone, it is for Download the Firmware 1x 128x64 pixel P2.5 RGB 1/16 scan LED Module (2x 64x32 pixel, or 1x 64x64 pixel 1/16 scan to detache them) 5V DC, 5A, 25W Power Supply (or DC-DC Step Down shield, above!) micro SD Card (1Gb to 16GB ist tested) I think that´s all what you need. The ribbon cables, to connect the display, comes with the display along with Power connectors. Check my Pin2DMD Album for Images: Download the actual Install Instructions: You find all insturctions here in the Download Section: http://vpuniverse.com/forums/files/category/85-pin2dmd-documentation/ now have fun with your personal Pin2DMD!
  2. Pin2Dmd Order Thread - Worldwide

    Inventory clearance from some old Order V4 Shields. The very 1st official design has one missing connection. And now I have over 30 boards for V-Pin only. Anyone need some? 1.75 USD each (pcb only, + shipping) quantity discount possible 1 set of V-Pin only parts (NO WiFi, NO max232, NO real pin enhancer ) = 10 USD (WiFi is extra 5 USD, but not really needed for V-Pin, because of the uninterrupted USB connection) Nucleo 144 = 27.00 USD - Sascha Mail: Pin2DMD@yahoo.com
  3. Version 1.0.0

    15 downloads

    A short instructions, how you connect your Pin2DMD WiFi Module into your HOME Network.
  4. DMD voltage issue with 2.49v of Pin2DMD

    I still have some V3 and V2 version Boards. Just PM me what you need.
  5. Version 1.0.0

    18 downloads

    simple HOW-TO connect the DC-DC Voltage converter
  6. some small update... https://www.facebook.com/UncleSash/posts/698432687031029
  7. Pin2Dmd Order Thread - Worldwide

    some small update... https://www.facebook.com/UncleSash/posts/698432687031029
  8. I think that you are able to handle that or? You just have to connect some wires for teh 5V DC! Disconnect your Power Supply! before you start working on anything like that!
  9. Not sure. I need more detailed pictures please.
  10. Feel free to contact me
  11. [mention=11434]vlgxejme[/mention] OK, to upgrade you System, follow this steps: 1st step: - unplug the 16 pin ribbon cable from the PCB! 2nd step: - connect the ribbon cable to the HUB75 on your V4 Shield! 3rd step: - connect +5V DC to this screw Terminal like it is labeld! - in this pic: - left (next to the nucleo): GND - right (on the outside): +5V DC 4th step: - connect a micro USB cable to this USB port and you PC, to hook up you Pin2DMD. - Maybe follow install instruction on the www.Pin2dmd.com side for drive installation! additional step: for a Firmware update, connect a micro USB cable to this port (I have all the time both ports connected) and your PC. Then follow the FW Upgrade instruction on www.pin2dmd.com for a longer 16 PIn IDC cable, check this ebay link: https://www.ebay.com/itm/12-Female-to-Female-16-Pin-IDC-Connector-Rainbow-Color-Flat-Ribbon-Cable/351117396361?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649 regards Sascha
  12. I make an edit.. after I looked to your picture... wait a second.... regards Sascha
  13. Godzilla

    Where is the VPin file? That we can use it on our Machines...
  14. Lwclone On Arduino Mega 2560

    Do that. Because I do not understood what you mean. This Design use the same number of I/Os. The MMA is directly connected.
  15. Lwclone On Arduino Mega 2560

    Feel free to bring your Ideas in. It is just the first layout to implement the mini. The terminals for the FETs are all 5.08mm pitch. And yes, we could stick them together, we can change that. Wemos... I still wait on mine. It was just ordered. But you can send me the Details how you think to implement it. Feel free to ask when you need anything. The ULN terminals are one 8 block (X4 & X5) on each side (the one next to the uln). The other 4 blocks (X1,2,3,7) are the keyboard inputs. (The labeling is not done yet)
  16. Lwclone On Arduino Mega 2560

    The first Layput for the Mega2560 pro mini is done... 10x10cm What do you think? @Aetios
  17. Lwclone On Arduino Mega 2560

    1st Step is done. LED WIZ Mega rev 1.5! Implementing the MMA845 into the OLD Design with original Arduino MEGA Footprint! Also improvet (since rev 1.4): 3.5mm pitch - Screw Terminals! Next Step: Implenting the MEGA2560 MINI into the Design! needs a couple Days.... because I am busy. - Sascha
  18. Pin2Dmd Colorprism V2.0 Firmware

    try to UNINSTALL the Pin2DMD in the Device Manager unplug the USB Cable from Pin2DMD Shield restart the PC exit PBX (when it starts auto) connect the USB to Pin2DMD Shield try if it works when not, run the ".\PIN2DMD-master\usb_driver\zadig_2.1.2.exe" tool and install the WinUSB Driver for Pin2DMD (when the Pin2DMD is not in your list, click on "Options" and mark "List ALL Devices") works now?!
  19. Pin2Dmd Order Thread - Worldwide

    V4 Shield SALE is LIVE! V4 Supports XL DMDs for SEGA Machines! Start to Order on the first page of this Thread! V4 Set 1: Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi) WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 65.00 USD + Shipping V4 Set 2: Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball) WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 60.00 USD + Shipping V4 Set 3: DIY - Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi) NO soldering service!!! costs: 60.00 USD + Shipping V4 Set 4: DIY - Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball) NO soldering service!!! costs: 55.00 USD + Shipping Plus Shipping costs: 7.50 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box (for one Set, when you have more as one, please ask me for pricing) or Low cost shipping - price depends on weight - very recommend for Orders outside from the US!
  20. V4 Shield SALE is LIVE! V4 Supports XL DMDs for SEGA Machines!
  21. Pin2Dmd Order Thread - Worldwide

    V4 Shields are LIVE!
  22. Pin2Dmd Order Thread - Worldwide

    Hello Folks. All V3 Controllers are SOLD OUT. But there are still a few V3 Shields there! Get the Chance and grab yours! You can get the Controller from ebay, DigiKey, Ali, etc. - Sascha
  23. Lwclone On Arduino Mega 2560

    No problem. Which value needs the resistors?
  24. I know. But I think that our LWClone with the new MMA Update, is the better choice for the most of us, how don't need so many devices. @all: I will post it in the LWClone Forum, when the new Shield is ready. But everyone else is more as welcome to buy the naked #Pinscape shields... I have plenty in stock. And the price... just ask for a discount. - Sascha
  25. My Order arrived last night. And all 3 Boards are available from now on. Mainboard (4 USD each) Power Board (4 USD each) Chime Board (3 USD each) Or ALL 3 together for just 9 USD + Shipping Just PM me... - Sascha
×