Jump to content


Content Provider
  • Content count

  • Joined

  • Last visited

  • Days Won


UncleSash last won the day on December 31 2017

UncleSash had the most liked content!


About UncleSash

  • Rank
    Advanced Member
  • Birthday January 22

Profile Information

  • Gender
  • Location
    Greenville, SC

Recent Profile Visitors

2,971 profile views
  1. Pin2Dmd Order Thread - Worldwide

    Inventory clearance from some old Order V4 Shields. The very 1st official design has one missing connection. And now I have over 30 boards for V-Pin only. Anyone need some? 1.75 USD each (pcb only, + shipping) quantity discount possible 1 set of V-Pin only parts (NO WiFi, NO max232, NO real pin enhancer ) = 10 USD (WiFi is extra 5 USD, but not really needed for V-Pin, because of the uninterrupted USB connection) Nucleo 144 = 27.00 USD - Sascha Mail: Pin2DMD@yahoo.com
  2. Version 1.0.0


    A short instructions, how you connect your Pin2DMD WiFi Module into your HOME Network.
  3. DMD voltage issue with 2.49v of Pin2DMD

    I still have some V3 and V2 version Boards. Just PM me what you need.
  4. Version 1.0.0


    simple HOW-TO connect the DC-DC Voltage converter
  5. some small update... https://www.facebook.com/UncleSash/posts/698432687031029
  6. Pin2Dmd Order Thread - Worldwide

    some small update... https://www.facebook.com/UncleSash/posts/698432687031029
  7. I think that you are able to handle that or? You just have to connect some wires for teh 5V DC! Disconnect your Power Supply! before you start working on anything like that!
  8. Not sure. I need more detailed pictures please.
  9. Feel free to contact me
  10. [mention=11434]vlgxejme[/mention] OK, to upgrade you System, follow this steps: 1st step: - unplug the 16 pin ribbon cable from the PCB! 2nd step: - connect the ribbon cable to the HUB75 on your V4 Shield! 3rd step: - connect +5V DC to this screw Terminal like it is labeld! - in this pic: - left (next to the nucleo): GND - right (on the outside): +5V DC 4th step: - connect a micro USB cable to this USB port and you PC, to hook up you Pin2DMD. - Maybe follow install instruction on the www.Pin2dmd.com side for drive installation! additional step: for a Firmware update, connect a micro USB cable to this port (I have all the time both ports connected) and your PC. Then follow the FW Upgrade instruction on www.pin2dmd.com for a longer 16 PIn IDC cable, check this ebay link: https://www.ebay.com/itm/12-Female-to-Female-16-Pin-IDC-Connector-Rainbow-Color-Flat-Ribbon-Cable/351117396361?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649 regards Sascha
  11. I make an edit.. after I looked to your picture... wait a second.... regards Sascha
  12. Godzilla

    Where is the VPin file? That we can use it on our Machines...
  13. Lwclone On Arduino Mega 2560

    Do that. Because I do not understood what you mean. This Design use the same number of I/Os. The MMA is directly connected.
  14. Lwclone On Arduino Mega 2560

    Feel free to bring your Ideas in. It is just the first layout to implement the mini. The terminals for the FETs are all 5.08mm pitch. And yes, we could stick them together, we can change that. Wemos... I still wait on mine. It was just ordered. But you can send me the Details how you think to implement it. Feel free to ask when you need anything. The ULN terminals are one 8 block (X4 & X5) on each side (the one next to the uln). The other 4 blocks (X1,2,3,7) are the keyboard inputs. (The labeling is not done yet)
  15. Lwclone On Arduino Mega 2560

    The first Layput for the Mega2560 pro mini is done... 10x10cm What do you think? @Aetios