Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

lucky1

Content Provider
  • Content Count

    1,691
  • Joined

  • Last visited

  • Days Won

    87

lucky1 last won the day on December 1 2018

lucky1 had the most liked content!

About lucky1

  • Rank
    Advanced Member

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

6,723 profile views
  1. lucky1

    Lethal Weapon 3

    Load the firmware through USB to recover. Method is described on pin2dmd.com
  2. lucky1

    Recording Pin2DMD videos

    You need to record the videos in the native resolution of the pin2dmd which is 128x32
  3. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    That was introduced by Oga to prevent people sharing modified ROMs. You should have a macro for your changes. If you run that after the original macro it should make the changes again. If you mor questions about pinball browser the official pinside thread is a better place.
  4. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    With pinball browser and the makro from _j_m
  5. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    You should get "OK" when the serial port is working properly and "Loop Error" when not.
  6. Bleeding was a problem of the first generation panels. Current panels don´t have that anymore. e.g https://de.aliexpress.com/item/p2-5-160-80mm-led-module-P2-5-Indoor-full-color-LED-module-1-16-scan/1000001203401.html
  7. lucky1

    Pin2Dmd Colorprism V2.0 Firmware

    v2.62 - added RS232 test to onscreen menu - added option to turnoff Wifi in onscreen menu
  8. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    I released the v2.62 which adds a RS232 test to the onscreen menu. Make a connection between TX and RX pin to test. https://github.com/lucky01/PIN2DMD/tree/master/firmware/latest/V4 NUCLEO-144
  9. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    Do you have a wifi chip installed ? Did you patch the ROM with your serial number ?
  10. I use the same panels for the EVO. Doublepost and wrong subforum. Please take care where you post next time.
  11. lucky1

    Anyone using Nucleo and serial on a stern pinball?

    I´m running the Nucleo firmware (on a EVO board) in my ST Pro and haven´t noticed any problems so far. Is the problem reproducable like the same scene has always the wrong colors ? From the code side there is absolutely no difference between the builds for disco and nucleo except that the uart ports are mapped to different pins. Do you have a wifi chip installed ?
  12. lucky1

    PIN2DMD EVO128x32 Controller Board

    Programming is done through USB DFU mode using this tool https://www.st.com/en/development-tools/stsw-stm32080.html and the nucleo dfu firmware from github. DFU mode is activated by holding down the boot button during power on. Activation process is the same.
  13. Looking awesome but I think you forget the right hand here
  14. lucky1

    Pin2Dmd Editor

    I don´t think Steve is reading here very often. Please post your questions / issues here https://github.com/sker65/go-dmd-clock/issues
  15. lucky1

    Needs some help with the basics (replace pindmd3)

    Pindmd3 is basically a slightly modified version of https://github.com/pixelmatix/SmartMatrix using a dll to communicate with it, which makes it also a mix of hardware and opensource software. The difference to pin2dmd is that with pin2dmd you have the choice between building it yourself or buy it ready to run from various guys.
×