Jump to content

Arkadia

Members
  • Content count

    7
  • Joined

  • Last visited

  1. StartUp Video - Special When Lit

    Nice Video! What is the name of this "Jesus" Pinball from this video? The one with the colorfull church window as backblass? Minute 10:45-11:00 Looks like the old Crystal Caliburn pinball for mac & win. I like to have this on as VP Table .....
  2. PinballX no Teensy Led feedback

    Update: DOFLinX working with full game feedback in FX2 Change settings in DOFLinX.ini : PROCESS_TO_ACTIVE_TIME=30000 This will give you full force feedback with slingshots, shaker and more... It seems that DOFLinX needs more time to initialize the full force But how to drive the Teensy Leds with DofLinX ?? Here is some relaxing pinball video after all this hustle
  3. PinballX no Teensy Led feedback

    thanks. yes i know this two helpfull links. My VP Status: VP working PBX working PBX plugin working DOF working Tennsy Leds working in VP and PBX B2S Server working in VP and PBX DOFLinx is not working with FX2 No real B2S DOF feedback in FX2 No Teensy Leds in FX2 Something is blocking the connection between DOFLinx and DOF devices
  4. Lwclone On Arduino Mega 2560

    Hi cyclemat you are my vp hero (together with unclesash)..... keep up your very good work! thank you for all! I have some questions about the ledwizclone: 1) In your video there is a verify error after checking the written default bootloader. I got this error too. Is this O.K.? Just a china R3 clone problem? 2) How can we use the ADXL335? All tables in VP are unplayable if analog nudge is activ. What is the right VP setting for ADXL335?? 3) Under Win10 i got the ledwizclone recognized with additional 2 or 4 Hid Usb devices (Gamecontroller) at the same time? Its inpossible to delete this devices with USBDeview. Just a ID change will help for some time but the problem will appear again if USB cable is disconnected or reboot. Is this a firmware, driver or hardware (power) problem? I have 12V connected via the unclesash shield. Is there a special driver needed? 4) Can you show how to connect the z-diode with ULN2803 to get different voltages to a single port and not the whole bank. And how to connect the H-Bridge? Have you made a direct connection to the ULN chip or a firmware with one inverted port? The H-bridge needs a positv input.
  5. PinballX no Teensy Led feedback

    thank you kiwi! good to see this forum a little bit alive I got the Teensy Leds working now! 😀 yes i had a cabinet.xml Unchecked the admin rights for pinballx and created a new globalconfig with same setup. After that i got light on teensy strips in pbx too. 😎 very strange! i think this win10 admin right is blocking some needed dll or exe without reporting that in any log. And then there is no good connection between some plugins. Everything is unblocked by the way. But now i have got next DOF problems with DOFLinx and FX2. Same strange things here. When i check admin rights for the DOFLinx.exe the log is reporting no tennsy (no Ftdi serial and no ports). There is just a standard solenoid feedback via the pressed Lshift + Rshift button on keyboard. No real FX2 game feedback. When i unckeck the admin rights for doflinx.exe the log shows a good ftdi device with 8 port (this is the teensy in doflinx). But after that i got no feedback at all and no B2S feature because the doflinx.exe has no admin rights. Aaaaaarghhh 😣 In both settings i can press button "5" and have red leds with the also connected and found ledwiz. Doflinx seems to work a bit but not fully because of some crazy admin rights???? Is someone able to help me out of this dilemma ?
  6. PinballX no Teensy Led feedback

    Update: I tested some normal RGB Led´s on the Ledwiz with PBX. This is working. The Color is changing with most tables. But the Direct Output PinballX Plugin.dll is still not driving the Teensy Leds. The control led on Teensy is only blinking slow and not fast, like when receiving data. The PinballX Plugin LOG is showing no Error : Plugin config loaded Initializing plugin Loading PBX config data PBX config data loaded Initializing DOF DOF initialized The following +++ RomNames are configured in DOF: PBXWHEELLEFT,PBXWHEELPAGELEFT,PBXMENUDOWN,PBXWHEELRIGHT,PBXWHEELPAGERIGHT,PBXMENUUP Table/RomName mapping loaded Sending initial PBX state Init complete Event_Input Action: PBXWheelRight Action: PBXWheelLeft PinballX Table Settings inside the Dof Configtool.: Flipper Left: $PBXWheelRight/$PBXWheelPageRight/$PBXMenuUp Flipper Right: $PBXWheelLeft/$PBXWheelPageLeft/$PBXMenuDown No Teensy Led is working with PinballX. What can i try? PS.: Found a bug when starting Champion Pub, Dungeons and Dragons or Indiana Jones (2008) over PinballX. The PBX program will crash. A normal VP start without PBX will run the same tables without problems.
  7. How can i get the PBX browsing feedback working with teensy leds? I have the solenoids working for left and right flipper in PBX but no leds. It seems to me that the DOF plugin is not running right in PBX, because in the B2S Screen i can not open the DOF plugin Settings. (Inside VP i can select this button.) The PinballX DOF plugin is activated in PBX. The Globalconfig_PinballX.xml and DirectOutput PinballX Plugin.dll is inside PinballX plugin directory. My DirectOutput folder is on drive F:\DirectOutput. Some people reported a non working dof if the controller id or c:\DirectOutput folder is a little bit different. Also when the XML is pointing to the right path. I have one LedWiz ID 6 and one Teensy No. 30. (directoutputconfig6.ini + directoutputconfig30.ini but no directoutputconfig.ini because i dont have a LedWiz ID1). Is this the problem? Teensy is always No. 30 with the Dof Tool. I have made the 3 RGB addressable Combos like this link: http://vpuniverse.com/forums/topic/2695-configtool-big-update-for-teensy-users/ Maybe a wrong folder or a missing INI / XML for the PBX plugin???
×