Jump to content

Aetios

Members
  • Content count

    34
  • Joined

  • Last visited

  • Days Won

    1

Aetios last won the day on October 19 2017

Aetios had the most liked content!

About Aetios

  • Rank
    Advanced Member
  1. Lwclone On Arduino Mega 2560

    @JeanDrEaD unfortunately, arduinos with ch340 aren't compatible with this flashing procedure,. Sorry
  2. If you speak about The Pinscape, the controller is a FRDM-KL25Z. You can get more information on the website here : https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/l-seriesultra-low-powerm0-plus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z
  3. Lwclone On Arduino Mega 2560

    @UncleSashOk, so here is my idea, I draw it on Autocad because that's the only software I know... So with my explanation - I put the FETs like that because I think about some heat problems with gear by example. with this type of organization, we can put a dissipator on one or several FETs - You have the 16 keyboard inputs - the 8 buttons for joypad (depends if they can work, if not, we delete them) - I draw the wemos at scale so normaly that fit exactly like I draw it (just wait yours to confirm that - I draw terminals for the three WEMOS data PIN and the GND (i realized, there is 4 resistance 220, we just need 3... ) I don't know if it's realisable like that, just keep me inform if you need something DWG File
  4. Lwclone On Arduino Mega 2560

    For me, we have one block of 8 which is useless (2*8 for keyboard, 1*8 for joystick terminal and just 1 terminal for A4 plunger) I will try to draw something to give my idea. @kakou if you can take a look at the firmware to implement the 8 joypad buttons. If they don't work at all, we can delete them from this project šŸ˜‰
  5. Lwclone On Arduino Mega 2560

    For me, we have one block of 8 which is useless (2*8 for keyboard, 1*8 for joystick terminal and just 1 terminal for A4 plunger) I will try to draw something to give my idea. @kakou if you can take a look at the firmware to implement the 8 joypad buttons. If they don't work at all, we can delete them from this project šŸ˜‰
  6. Lwclone On Arduino Mega 2560

    Great, I ve got some questions so šŸ˜‰ You don't put the Wemos ? Any chance to have it one the same pcb ? Can you stuck the big terminals each other like the small ones ? How do you separate buttons terminals and uln terminals ? Do you need dimension for the wemos ? Can I suggest a disposition for this new shield ?
  7. Pin2DMD Editor

    I will give a try to your new version Thx @Lucky1
  8. Pin2DMD Editor

    PinballSP himself I tried to update to 2.43 and that didn't work, so I contacted him to find a solution, i've got a problem on a dip switch I repaired, then I could flash my pin2dmd but i can't put to 2.43, only on 2.41
  9. Pin2DMD Editor

    I will share it with you in a Google drive folder. I will send to you the link this evening.
  10. Lwclone On Arduino Mega 2560

    @UncleSash Good Job ! Here is the last Firwmare, I've remapped some buttons, changed the hotkey attribution and switched buttons. I've made a double pack for two type of Arduinos MEGA2560 : - those which have a DFU mode - and without DFU, so the same way that cyclemat explain here (with USBASP etc...) Last Firmware Pack : https://mega.nz/#!t8c3wChI!HYkTybykeWW-CSzzqDcPaVBNcBk8ujmkHTz8YxxihqQ For the DFU mode method, you need also FLIP 3.4.7 to flash the 16U2 chipset https://mega.nz/#!o0NCSARJ!HEXEutTiIVyjaiv-57tuFtO3e1_MweD84-XJ6YPpmyg I will write another How To if necessary, I wrote one but it's in french in Pincab Passion. For those who wants to try, I recommand to buy a Funduino MEGA2560, it has the DFU mode (no need for an USBASP) and works perfectly with this new firmware
  11. Pin2DMD Editor

    I 've looked into the good folder... but no *.pal was created. I tried several times yesterday... And you are right, the error message is about not releasing copyrighted material Otherwise, could you confim me that we can just use 9 palettes (0 to 8) because when I test with "live preview", all palettes after the nĀ°8 can't be use by my PIN2DMD (updated to 2.41, can't update anymore , it's a PinballSP DMDST32). Thx
  12. Pin2DMD Editor

    @Rappelbox so I tried to export the project (just for a first). I registered with my key file (the same for the PIN2DMD), and seems to work... but when i want to export I get a warning message, I click "OK" but I don't have anyfile.
  13. PROC & UltraDMD on Pin2DMD?

    Hi everbody ! Any chance to have some improvement for video playing (Ultra DMD) on PIN2DMD, because I have a very low brightness level , but the videos of Stranger Things or Diablo still washed over, every color seems to be White with a lit bit of color. Black is the only correct "color" (pixel on state off). I think, there is a technology limitation but maybe by there is a post-treatment to aply on the video to improve the rendering on DMD... If somebody has a good rendering (or think he has) on his PIN2DMD with stranger things or diablo, could he share a little demonstration video here ? Thx
  14. That's sounds like a good idea ! I'm asking myself about having a good video to put on PinballX because most of them have a bad rendering on a PIN2DMD. I will try something with the PIN2DMD tool and try to create a file to test it
Ɨ