Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

realpinz

Members
  • Content Count

    5
  • Joined

  • Last visited

Everything posted by realpinz

  1. Ok, whilst waiting for the new (hopefully) genuine discovery boards I finally had some time to investigate further. The boards can be made to work properly as will be described below, very simple process. Of coarse this will only work if ----you have the same type of counterfeit board ---have corruption or hashing on the display from a real pinball, splash screen or anything generated on the Pin2DMD is fine like menus. ---the issue is corrupted communication between the real pin and the (fake) STM32F40X discovery via any version of shield. ---I had discovery boards with a green audio jack and a black audio jack, both types definitely fake. The issue I was experiencing was due to the data on "pin_DMD_sd" PIN2 of the pinball dmd header which goes to PA7 on the discovery getting corrupted. The corruption was being created by U5 on the discovery that shares PA7 (and is wired directly to it). Thee fake boards are using a different U5 and for what ever reason it is trying to send data out when it shouldn't clobbering the DMD serial data and creating the corruption. My proof of concept was to cut the trace at U5 (via that goes to it anyway) from PA7 of the main (large) stm chip. Make sure obviously you leave the connection between the header where PA7 comes onto the discovery and to the large chip. Didn't have any issues with ST-link or any other functions in this state (with the trace cut). hope this may help someone stuck with a fake discovery. Cheers
  2. I think I answered my own question.... re-checked the STM32F407's and although they have all the right hardware I think they are still fake. re-ordering some from a reputable dealer and see what happens.. If these work will look into what is wrong with the others once I have a benchmark to compare to. Any other ideas, things to try please don't be shy.
  3. Howdy, Thought I would chat to the experts on the issue I am having with a real pin interface. Have a V2.1 shield (I think) constructed as per the schematic that has noise or hashing when used on a real WPC pinball. I have tried the latest firmware and rolled it back to V2.30 with no difference. STM32F704, configured for williams (also tried wpc95 with earlier version). have tried different:- shields, DMD ribbon cables, power-supplies (5V Dc-Dc and smps's). adjusted the voltage from 4.8->5.0 measured at the shield. tried it in a WPC-95 and WPC89 system. with a stern LED display it is clean and clear, the Pin2DMD splash screen is clean, with real color files it locks up the system, with no pallet or color files it is noisey. just have the license and the config on the SD, config states "Williams" so the key is also working o.k. Any hints? Used the same hardware on a Simpsons PP and it was perfect. Different discovery boards is all I can think of at the moment. cheers
  4. bought a few of these cheap Chinese STM32F407's. To get them to work had to reflow the pins on the micro, usb controller and sever components. also reverted the onboard boot loader to an earlier version. V2j24s5 I think it was. anyway all 3 boards now work so at least I got lucky.
  5. I too have had some issues with some discovery board purchases from china. 407's One batch had the micro USB mounted upside down ( original discovery actually had an inverted micro usb socket ) effectively reversing 5v and gnd from the host computer usb port. Luckily my PC had a current limit on the ports. Another batch had a much different boot loader firmware that caused similar issues to what you are experiencing. Google it and there should be a repository with an older version of the boot loader/firmware ( hardware level, works in unison with the programme firmware you load on top, aka PIN2DMD ). In both cases I was able to get all the discovery boards working. Why they change things batch to batch is beyond me, similar issues with the led panels RGB,GRB issues and driver timings causing pixel ghosting/bleeding. Still worth all the hassle, my Simpson's pinball party looks awesome in glorious pin2dmd colour. Good luck.
×
×
  • Create New...