Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


Popular Content

Showing content with the highest reputation on 11/11/2017 in all areas

  1. 2 points

    Elektra (Bally 1981)

    Version 1.0.0


    Elektra (Bally 1981) Hi Rez
  2. 1 point

    Problem with Pin2DMD on DATA EAST

    Hi Psmmacker, in first thanks a lot for your help. You have the same problem like me? this fix this kind of problem for you? I'm very surprise that GND on display wil be the problem but I hope this can help... BTW, thanks a lot for your help.
  3. 1 point

    Problem with Pin2DMD on DATA EAST

    As long as you don´t get a flickering red or blue led there is a problem with signal data (DMD_SD) or signal clock (DMD_SCLK) Please check against the schematics https://github.com/lucky01/PIN2DMD/blob/master/hardware/V3 STM32F4 DISCOVERY/PIN2DMD-v3.0.pdf
  4. 1 point
    I replaced the plunger that came with my VirtuaPin mini with a Zebs v2 kit and it is glorious. So much better than what came with the cab. The device comes with firmware that emulates 16 keyboard keys plus four buttons or you can flash it to act as a straight 20 button controller. The design still doesn't allow you to twist the plunger but that is a small price to pay. I enthusiastically recommend it for anyone building their own cab or even for those users who have an existing plunger kit who haven't been fully satisfied with the performance of their existing unit. You won't be disappointed.
  5. 1 point

    [New B2S Alert] Elektra (Bally 1981)

    Wonderful. Once again doing upgrade for something that could look better. Thank you very much Wildman. With VPX and updates done to more than a few b2s' - I really have something to show off to friends, and that is just extra for what it gives me.
  6. 1 point

    Tee'd Off

    Thanks for the help. I'll keep at my colorizing. I made a spreadsheet to catagorize my recordings and different bookmarks. I then connected those with the scenes and palettes that I have been using to colorize. Finally, when I figure out Keyframes, I will connect those to the recordings and scenes. The notes are for anything, but mostly why I haven't gone forward with creating a scene because of dynamic on screen parts, or needing to mask areas.
  7. 1 point
    View File Buck Rogers (Gottlieb 1980) Sound MOD v1.11a I first would like to thank BorgDog for giving me permission to make this sound mod. I would also like to thank him for making a great table!! I also would like to thank everyone who contributed to this table including, Hauntfreaks and Sindbad!! They put in alot of time and work on the original table, and it is appreciated!! So if you like this mod, I would encourage you to thank the original author of the table, as I have only made a few changes! Check Original Table download page for more important info. Original Table... http://vpinball.com/VPBdownloads/buck-rogers-gottlieb-1980/ I also would like to thank Allknowing2012 and Gtxjoe for teaching me how to add timers to script. I also would like to thank DJRobX, STAT, Gtxjoe, and nFozzy, for helping me shorten my StopSounds and PlaySounds script commands. (They each wrote out an example, and between them all, I was able to figure it out!! BIG THANKS!!!) I would also like to thank Scottacus for all the help with the TILT sound effects script!! BIG THANKS!! I also would like to thank Steve "Slydog43" for which these VPX mods would not be possible!! Version 1.11a Stopped some timers that were still activated after pressing player1 start. Added coin sound effect to 3 key. Version 1.1a Noticed "Drain" sound effect was missing from sound manager, so I added it to sound manager from another table. (It was hard to catch this as you could only tell after last ball drain.) Also fixed script so coin is heard on coin insert.(There was not a coin sound effect named "coin" that the script was calling for. So I just changed to "Coin3" as there were 2 different coin sound effects already in the sound manager.) Scottacus helped fix the script for DT view objects to disappear when in FS mode. (If you ran FS view without B2s, the objects didn't disappear as per Scotts info.) BIG THANKS!! I added GI lights to Buck Rogers Logo and pic on left side of DT backdrop. Scottacus came up with working TILT sound effects script!! BIG THANKS!! (I will learn this if it kills me!!) 1 of 4 sound effects will be played when you TILT table. I Added 133 sound effects triggered by events. All of these sound effects are played through backglass instead of table per Vogliadicanes info. There are 4 background music sound effects triggered by plunger.(From actual Movie.) There are 2 other background music sound effects that are not triggered by plunger. 1 is triggered by hitting upper kicker. (1 in 16 chance of triggering it.) Twiggy says "Get Down Groovy" and a groovy song is played.(One from actual movie.) The other background music sound effect is only played during attract mode after losing a game. (This is the song that was played at end of tv show. It sounds corny, but true Buck Rogers fans will appreciate it.) You will need to hit F6 to bring up the Dipswitch Menu, and turn off ROM scoring sounds. (Or use the nvram I included with download.) Copy the nvram to your nvram folder where Visual Pinball is installed. I couldn't seem to shut off the ROM sounds and have them turn back on with table exit like other sound mods I have released. So you will need to turn off these sounds with either method above. BorgDog has made this in Portrait Mode. STAT left a POV.xml for Landscape Mode as attachment here in BorgDog's Support Topic.. http://vpinball.com/forums/topic/buck-rogers-gottlieb-1980/#post-49053 I will include this with download, but be sure to thank STAT for it!! Simply load table into Visual Pinball Editor, and click "File" tab, then click "Import Backdrop POV". Then a window will pop up allowing you to browse to BuckRogersPOV.xml. After importing simply start table. You will need to save the table after making changes, for them to stay If you are looking for a dB2S Backglass, Borgdog included one with his table download. (I didn't have enough room to include the dB2S Backglass, as these 2 Buck Rogers Sound Mods are over 166 MB's each.) So you need to go to his download page if you want the dB2S Backglass. All pics, trademarks, Logos and sounds belong to their respectful owners. This table is for personal home, and non-commercial use only. This table should be used for educational purposes only.. Hope you enjoy!! I also made a version 1.1b that Scottacus changed all the DT LED's to reels to get his No Credit sound effect script to work, but I have a 720p monitor, so people with other screen resolutions, will see the LED's don't line up correctly. So I will try to get this fixed and have it uploaded shortly. I guess someone with a 1080p monitor will have to line them up correctly, as my screen resolution is 1365x768, which makes them not line up on others monitors. Submitter xenonph Submitted 10/31/2017 Category Visual Pinball 10 - Tables ROM Name buckrgrs Link to B2S Link to Media Pack Permission to Mod Contact Author First. VP Version v10