Jump to content
  • What's Next?

     

     

VPU Patching System - Table Modifications (DT)

  1. All
  2. A
  3. B
  4. C
  5. D
  6. E
  7. F
  8. G
  9. H
  10. I
  11. J
  12. K
  13. L
  14. M
  15. N
  16. O
  17. P
  18. Q
  19. R
  20. S
  21. T
  22. U
  23. V
  24. W
  25. X
  26. Y
  27. Z
  28. #

107 files

  1. Avengers_v1.2bDT

    Desktop Patch for Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt by gtxjoe (coolball for the Desktop-Patch)
    Thank you very much gtxjoe for this fantastic table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt" / http://vpuniverse.com/forums/files/file/2830-avengers-pro-stern-2012-gtxjoe-fs-vp921-vp990/
    Use the Mod: "Avengers_v1.2bDT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    591 downloads

       (0 reviews)

    0 comments

    Updated

  2. Avatar_v1.01b_DT.zip

    Desktop Mod for Avatar (Stern) (2010) (85vett).vpt by 85Vett and dup3d(for the BMPRlite2 Mod) / (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Thank you dup3d for the permission to use your BMPRlite2 Mod.
    I used the Avatar Table by 85vett and the BMPRlite2 Mod by dup3d to create the Desktop-Patch.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avatar (Stern) (2010) (85vett).vpt"
    Use the Mod: "Avatar_v1.01b_DT.zip"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    398 downloads

       (0 reviews)

    0 comments

    Updated

  3. Austin Powers (Stern 2001) (DT) VPUPatch

    Desktop Patch for Austin Powers (Stern 2001)_HR_FS_VP9.2.1 _1.3 by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Austin Powers (Stern 2001)_HR_FS_VP9.2.1 _1.3" / http://vpuniverse.com/forums/files/file/2705-austin-powers-stern-2001-hr-fs-vp921/
    Use the Mod: "AustinPowersdesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    216 downloads

       (0 reviews)

    0 comments

    Updated

  4. Spiderman (Stern 2007) (DT) VPUPatch

    Desktop Patch for Spiderman Stern 1-01.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Spiderman Stern 1-01.zip" / http://vpuniverse.com/forums/files/file/2743-spiderman-fs-stern-2007-85vett/
    Use the Mod: "Spidermandesk2.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    366 downloads

       (0 reviews)

    0 comments

    Updated

  5. X-Men (Stern 2012) (DT) VPUPatch

    Desktop Patch for XMen FS 1-02.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "XMen FS 1-02.zip" / http://vpuniverse.com/forums/files/file/2679-x-men-pro-stern-2012-85vett/
    Use the Mod: "XMENdesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    457 downloads

       (0 reviews)

    0 comments

    Updated

  6. Iron Man (Stern 2010)(DT) VPUPatch

    Desktop Patch for Ironman FS 1.04.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Ironman FS 1.04.zip" / http://vpuniverse.com/forums/files/file/2470-iron-man-stern-2010-85vett/
    Use the Mod: "Ironmandesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    460 downloads

       (0 reviews)

    0 comments

    Updated

  7. Tron (Stern 2011) (DT) VPUPatch

    Desktop Patch for Tron FS 1-4.vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Tron FS 1-4.vpt" / http://vpuniverse.com/forums/files/file/2624-tron-le-stern-201185vett/
    Use the Mod: "Trondesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    425 downloads

       (0 reviews)

    0 comments

    Updated


×
  • Create New...