Jump to content
  • What's Next?

     

     

VPU Patching System - Table Modifications (DT)

  1. All
  2. A
  3. B
  4. C
  5. D
  6. E
  7. F
  8. G
  9. H
  10. I
  11. J
  12. K
  13. L
  14. M
  15. N
  16. O
  17. P
  18. Q
  19. R
  20. S
  21. T
  22. U
  23. V
  24. W
  25. X
  26. Y
  27. Z
  28. #

107 files

  1. WWF_RR_v1.0_PM5_DT.zip

    Desktop Patch for WWF Royal Rumble (Physmod5).vpt by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod.
    Thank you Wildman for the sharp Backglass
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    - New Backglass (by Wildman)
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "WWF Royal Rumble (Physmod5).vpt" / http://vpuniverse.com/forums/files/file/3006-wwf-royal-rumble-data-east-1994/
    Use the Mod: "WWF_RR_v1.0_PM5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    272 downloads

       (0 reviews)

    0 comments

    Updated

  2. PotC_v1.4b_VP99_DT.zip

    Desktop Patch for Pirates Of the Caribbean.vpt by 85Vett (coolball for the Desktop-Patch)
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    I'm not really happy with the Flipper settings, maybe someone can help with better settings.
    Need a better placed wall (for this desktop version at the plank to prevent ball from getting stuck behind bumper.
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Pirates Of the Caribbean.vpt" /http://vpuniverse.com/forums/files/file/2458-pirates-of-the-caribbean-stern-2006-85vett-fs-12/
    Use the Mod: "PotC_v1.4b_VP99_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    607 downloads

       (0 reviews)

    0 comments

    Updated

  3. Elvis_NightMod_PhysMod_1.0b_DT.zip

    Desktop Patch for Elvis_NightMod_PhysMod_1.0.vpt by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the King of Rock'n Roll table and the permission to mod.
    Thanks Credits:
    JP: Original Table and Scriptw li
    Johanpsu: Sound Samples used in the original
    Dark: Primitive bolts and screws used
    Zany: Primitive Flasher Domes, Lamp Lights, Bumper Caps, and Wire Rings used
    LoadedWeapon: Reworked Images, New ramps, Apron, Updated with neghting and updated script etc..
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Elvis_NightMod_PhysMod_1.0.vpt" / http://vpuniverse.com/forums/files/file/3186-elvis-nightmod-stern-2004-fs-physmod/
    Use the Mod: "Elvis_NightMod_PhysMod_1.0b_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    165 downloads

       (2 reviews)

    0 comments

    Updated

  4. Harley Davidson_v1.1_PM5_DT.zip

    Desktop Patch for Harley Davidson (Sega) (1999)(Edizzle)(V1.1)(FS)(PM5).vpt by Edizzle (coolball for the Desktop-Patch)
    Thank you Edizzle for this nice table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Harley Davidson (Sega) (1999)(Edizzle)(V1.1)(FS)(PM5).vpt" / http://vpuniverse.com/forums/files/file/3183-harley-davidson-sega-1999edizzlev11fspm5/
    Use the Mod: "Harley Davidson_v1.1_PM5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    151 downloads

       (0 reviews)

    0 comments

    Submitted

  5. Jurassic Park - The Lost World_v1.1(PM5)_DT.dif

    Desktop Patch for Jurassic Park The Lost World (Sega) (1997)(Edizzle)(FS)(PM5).vpt by Edizzle (coolball for the Desktop-Patch)
    Thank you Edizzle and all the involved people for this great new version and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Jurassic Park The Lost World (Sega) (1997)(Edizzle)(FS)(PM5).vpt" / http://vpuniverse.com/forums/files/file/3177-jurassic-park-the-lost-world-sega-1997-pm5/
    Use the Mod: "Jurassic Park - The Lost World_v1.1(PM5)_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    210 downloads

       (0 reviews)

    0 comments

    Submitted

  6. Indiana Jones_Stern_v1.0_Phsy5_DT.zip

    Desktop Patch for ndiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    - Special Thanks to freneticamnesic for help me with the yellow flasher
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Indiana Jones (Stern 2008).rar" / http://vpuniverse.com/forums/files/file/3141-indiana-jones-stern-2008-physmod5-freneticamnesic/
    Use the Mod: "Indiana Jones_Stern_v1.0_Phsy5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    267 downloads

       (0 reviews)

    0 comments

    Updated

  7. CSI_VP99_Physmod5_rev1.0_DT.zip

    Desktop Patch for CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the TOP table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt" / http://vpuniverse.com/forums/files/file/3108-csi-stern-2008/
    Use the Mod: "CSI_VP99_Physmod5_rev1.0_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.

    252 downloads

       (0 reviews)

    0 comments

    Submitted

  8. World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)Dt Wsvp99X

    Thank you bodydump for the super table and the permission to mod your table.
    Changes I have done.
    - created new Backdrop
    - changed the values to create a desktop version
    - added and adjusted rails and side walls
    - adjusted plunger ramp to fit
    Updated to 1.02
    I felt the outside walls and rails were not high enough to allow the virtual glass to be above all the table elements so I raised them as much as possible.
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)(FS MOD) @ http://vpuniverse.com/forums/files/file/2593-world-cup-soccer-bally1994bmiki75-koadic-bodydump-bent9812fs-mod/
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    266 downloads

       (0 reviews)

    0 comments

    Updated

  9. WPT_v1.1_PM5_DT.zip

    Desktop Patch for WPT (Stern 2006) freneticamnesic PM5 1.1.vpt by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Thank you Wildman for your sharp Backglass.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "WPT (Stern 2006) freneticamnesic PM5 1.1.rar" / http://vpuniverse.com/forums/files/file/3069-world-poker-tour-stern-2006/
    Use the Mod: "WPT_v1.1_ PM5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    319 downloads

       (2 reviews)

    0 comments

    Updated

  10. Road Kings (Williams 1986) v1.0 DT WSVP99x

    Thank you sliderpoint for the funtastic table and the permission to mod your table.
    Thank you freneticamnesic for fixing a transparency issue with the left rail image.
    Changes I have done.
    - added new Backdrop
    - changed the values to create a desktop version
    - adjusted rails and side walls
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: Road Kings (Williams 1986) SPv1 FS VP99x PM5 1 @ http://vpuniverse.com/forums/files/file/3054-road-kings-williams-1986-spv1-fs-vp99x-pm5/
    This is the VP9.9x mod use this file as the Original Table
    Road Kings (Williams 1986) SPv1 FS VP99x.vpt
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    124 downloads

       (0 reviews)

    0 comments

    Updated

  11. Austin Powers HR_ DT_v1.0_PhysMod.zip

    Desktop Patch for Austin Powers (Stern 2001) HR_ FS_VP9.9_Rev_1.0_PhysMod.vpt by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the cool table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Austin Powers (Stern 2001) HR_ FS_VP9.9_Rev_1.0_PhysMod.vpt" / http://vpuniverse.com/forums/files/file/3062-austin-powers-stern-2001-fs-physmod5/
    Use the Mod: "Austin Powers HR_ DT_v1.0_PhysMod.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    159 downloads

       (0 reviews)

    0 comments

    Submitted

  12. Transformers_v1.2_VP9.9_DT.zip

    Desktop Patch for Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt (coolball for the Desktop-Patch)
    Thank you freneticamnesic and gtxjoe for the ultimate power of your table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt" / http://vpuniverse.com/forums/files/file/3013-transformers-pro-stern-2011-fs-vp99-gtxjoe-freneticamnesic/
    Use the Mod: "Transformers_v1.2_VP9.9_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    415 downloads

       (1 review)

    0 comments

    Updated

  13. Big Buck Hunter_v2_DT_physmod5.zip

    Desktop Patch for Big Buck Hunter FS (physmod5 version 2).vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett and the helpers ASOT, GTXJOE, kanario40 and dark for this great table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Big Buck Hunter FS (physmod5 version 2).vpt" / http://vpuniverse.com/forums/files/file/3020-big-buck-hunter-pro/
    Use this Mod: "Big Buck Hunter_v2_DT_physmod5.dif" and have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    352 downloads

       (1 review)

    0 comments

    Updated

  14. Avatar_physmod5_DT.zip

    Desktop Mod for Avatar physmod5.vpt by 85Vett coolball for the Desktop-Patch)
    Thank you 85vett for this fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avatar physmod5.vpt" / http://vpuniverse.com/forums/files/download/2565-avatar-stern-2010-85vett/
    Use the Mod: "Avatar_physmod5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    253 downloads

       (1 review)

    0 comments

    Updated

  15. Corvette DT (physmod5)_v2.zip

    Desktop Mod for Corvette FS (physmod5) Version 2.vpt by 85vett / (coolball for the Desktop-Patch)
    Thank you 85vett for this fast table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Corvette FS (physmod5) Version 2.vpt" / http://vpuniverse.com/forums/files/download/2997-corvette-fs-bally-1994-85vett/
    Use the Mod: "Corvette DT (physmod5)_v2.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    335 downloads

       (0 reviews)

    0 comments

    Submitted

  16. Batman Dark Knight_v2_DT_physmod5.zip

    Desktop Mod for Batman Dark Knight FS (physmod5) version 2.vpt by 85vett / (coolball for the Desktop-Patch)
    Thank you 85vett for this great table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Batman Dark Knight FS (physmod5) version 2.vpt" / http://vpuniverse.com/forums/files/download/2989-batman-dark-knight/
    Use the Mod: "Batman Dark Knight_v2_DT_physmod5"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    496 downloads

       (1 review)

    0 comments

    Updated

  17. 24_v1.2_physmod5_DT.dif

    Desktop Patch for 24 (Stern 2009) freneticamnesic physmod5 v1.2 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "24 (Stern 2009) freneticamnesic physmod5 v1.2.rar" / http://vpuniverse.com/forums/files/file/2879-24-stern2009freneticamnesicfsphysmod5/
    Use the Mod: "24_v1.2_physmod5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    249 downloads

       (0 reviews)

    0 comments

    Updated

  18. XMen_physmod5_DT.zip

    Desktop Patch for XMen FS (physmod5).vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for this great physmod and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "XMen FS (physmod5).vpt" / http://vpuniverse.com/forums/files/download/2679-x-men-pro-stern-2012-85vett/
    Use this Mod: "XMen_physmod5_DT.dif" and have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    294 downloads

       (1 review)

    0 comments

    Updated

  19. Tron Physmod5_DT.zip

    Desktop Patch for Tron FS Physmod5.vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85Vett for this fast amazing table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Tron FS Physmod5.vpt" / http://vpuniverse.com/forums/files/file/2624-tron-le-stern-201185vett/
    Use the Mod: "Tron Physmod5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    251 downloads

       (1 review)

    0 comments

    Submitted

  20. Spiderman_phsymod5_DT.zip

    Desktop Patch for Spiderman physmod5.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85Vett for this fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Spiderman physmod5.zip" / http://vpuniverse.com/forums/files/download/2743-spiderman-fs-stern-2007-85vett/
    Use the Mod: "Spiderman_phsymod5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    200 downloads

       (0 reviews)

    0 comments

    Submitted

  21. SIMPSONS_DT_physmod5_1.0.zip

    Desktop Patch for SIMPSONS THE_FS_ vp_physmod5_1.0 by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for this beautiful table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "SIMPSONS THE_FS_ vp_physmod5_1.0.rar" / http://vpuniverse.com/forums/files/file/2957-the-simpsons-data-east-1990-fs/
    Use the Mod: "SIMPSONS_DT_physmod5_1.0.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    205 downloads

       (0 reviews)

    0 comments

    Submitted

  22. R&B_v1.31b_DT_physmod5.zip

    Desktop Patch for Rocky & Bullwinkle_HR_FS_VP_physmod5_Ver_1.3b by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for this beautiful table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Rocky & Bullwinkle_HR_FS_VP_physmod5_Ver_1.3b.rar" / http://vpuniverse.com/forums/files/file/2835-rocky-bullwinkle-and-friends-beta-physmod5/
    Use the Mod: "R&B_v1.31b_DT_physmod5.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    145 downloads

       (0 reviews)

    0 comments

    Submitted

  23. LastActionHero_v1.2_DT_physmod5.zip

    Desktop Patch for Last Action Hero (Data East 1994)FS_physmod5_rev.1.2 by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for this beautiful table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Last Action Hero (Data East 1994)FS_physmod5_rev.1.2.rar" / http://vpuniverse.com/forums/files/file/2889-last-action-hero-data-east-1994-fs/
    Use the Mod: "LastActionHero_v1.2_DT_physmod5.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    259 downloads

       (0 reviews)

    0 comments

    Updated

  24. 24_v1.12_DT.zip

    Desktop Patch for 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "24 (Stern 2009) freneticamnesic v1.12.rar" / http://vpuniverse.com/forums/files/file/2876-24-stern2009freneticamnesicfsvp990/
    Use the Mod: "24_v1.12_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    285 downloads

       (0 reviews)

    0 comments

    Updated

  25. Sharkey_v1.0_DT.zip

    Desktop Patch for Sharkey's Shootout (Stern 2000) (freneticamnesic) (FS) 1 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Sharkey's Shootout (Stern 2000).rar" / http://vpuniverse.com/forums/files/file/2821-sharkeys-shootout-stern-2000-freneticamnesic-fs/
    Use the Mod: "Sharkey_v1.0_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    167 downloads

       (0 reviews)

    0 comments

    Submitted


×
  • Create New...