-
What's Next?
VPU Patching System - Table Modifications (DT)
107 files
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Star Trek Pro Mod PM5 (Stern 2013)
By RobbyKingPin
Desktop Patch for Star Trek Pro Mod PM5 (Stern 2013) 1.0
Thank you gtxjoe &85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: " Star Trek Pro Mod PM5 (Stern 2013) 1.0 http://vpuniverse.com/forums/files/file/4020-star-trek-pro-mod-pm5-stern-2013/
Use the Mod: "Star Trek Pro Mod PM5 012216.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
236 downloads
- Star Trek Pro
- Star Trek
- (and 5 more)
0 comments
Submitted
-
Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic)
By RobbyKingPin
Desktop Patch for Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1 http://vpuniverse.com/forums/files/file/3141-indiana-jones-stern-2008-physmod5-freneticamnesic/
Use the Mod: "Indiana Jones (Stern 2008).dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.1 - added new Backdrop - change the values to create a desktop version
187 downloads
- Indiana Jones
- Sterm
- (and 4 more)
0 comments
Updated
-
The Walking Dead PRO Physmod 5 WIP 1.1
By RobbyKingPin
Desktop Patch for The Walking Dead PRO Physmod 5 WIP 1.1 by gtxjoe
Thank you gtxjoe for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "The Walking Dead Pro Physmod5 WIP 1.1 /http://vpuniverse.com/forums/files/file/3813-the-walking-dead-pro-physmod5-11/
Use the Mod: "The Walking Dead Pro Physmod5 1.1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
275 downloads
- The Walking Dead Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
Mustang Pro WIP
By RobbyKingPin
Desktop Patch for Mustang Pro WIP by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Mustang Pro WIP /http://vpuniverse.com/forums/files/file/3731-mustang-pro/
Use the Mod: "Mustang Pro WIP.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
162 downloads
- Mustang Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
Metallica DT 1.0 PM5
By RobbyKingPin
Desktop Patch for Metallica Pro FS PM5 1.0 by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Metallica Pro FS PM5 / http://vpuniverse.com/forums/files/file/3730-metallica-pro-fs-pm5/
Use the Mod: "Metallica Pro DT 1.0 PM5.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
345 downloads
- Metallica Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
Family Guy_BETA_VP991_DT.zip
By coolball
Desktop Patch for Family Guy_BETA_VP991.vpt by Gronimod (coolball for the Desktop-Patch)
Thank you Groni for the fantastic table and the permission to mod.
Thank you 85vett for this amazing tutorial for the Miniplayfield
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flasher
- Miniplayfield flasher
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Family Guy_BETA_VP991.rar" / http://vpuniverse.com/forums/files/file/3214-family-guy-beta-version-groni-pinball-vp991/
Use the Mod: "Family Guy_BETA_VP991_DT_v2.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
427 downloads
0 comments
Updated
-
Shrek (Stern) DT Beta v9.9.1
By 32assassin
given that Gronimod has been MIA for a few months,I did not get permission from Gronimod for this mod
file will be removed if requested.
updates
- mini playfield lights by 85Vette
-Center post fix by Aldiode
- Most if not all of the Shrek images by Ninuzzu
270 downloads
0 comments
Submitted
-
AC-DC_PhysMod5_Helen_v.1.1c_DT.zip
By coolball
Desktop Patch for AC-DC_PhysMod5_Helen_rev.1.1c.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "AC-DC_PhysMod5_Helen_rev.1.1c.vpt" / http://vpuniverse.com/forums/files/file/3117-acdc-stern-2012/
Use the Mod: "AC-DC_PhysMod5_Helen_v.1.1c_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
620 downloads
0 comments
Updated
-
Eight Ball Deluxe_physmod5_DT.zip
By coolball
Desktop Patch for Eight Ball Deluxe_physmod5.vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85Vett for this great old table and the permission to mod.
and thank you Gordon, that you help to solved the white dot problem.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Eight Ball Deluxe_physmod5.vpt" / http://vpuniverse.com/forums/files/file/2966-eight-ball-deluxe-fs/
Use the Mod: "Eight Ball Deluxe_physmod5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
222 downloads
0 comments
Updated