-
What's Next?
VPU Patching System - Table Modifications (DT)
107 files
-
XMen_physmod5_DT.zip
By coolball
Desktop Patch for XMen FS (physmod5).vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett for this great physmod and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "XMen FS (physmod5).vpt" / http://vpuniverse.com/forums/files/download/2679-x-men-pro-stern-2012-85vett/
Use this Mod: "XMen_physmod5_DT.dif" and have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
294 downloads
0 comments
Updated
-
AC-DC_PhysMod5_Helen_v.1.1c_DT.zip
By coolball
Desktop Patch for AC-DC_PhysMod5_Helen_rev.1.1c.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "AC-DC_PhysMod5_Helen_rev.1.1c.vpt" / http://vpuniverse.com/forums/files/file/3117-acdc-stern-2012/
Use the Mod: "AC-DC_PhysMod5_Helen_v.1.1c_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
620 downloads
0 comments
Updated
-
Family Guy_BETA_VP991_DT.zip
By coolball
Desktop Patch for Family Guy_BETA_VP991.vpt by Gronimod (coolball for the Desktop-Patch)
Thank you Groni for the fantastic table and the permission to mod.
Thank you 85vett for this amazing tutorial for the Miniplayfield
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flasher
- Miniplayfield flasher
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Family Guy_BETA_VP991.rar" / http://vpuniverse.com/forums/files/file/3214-family-guy-beta-version-groni-pinball-vp991/
Use the Mod: "Family Guy_BETA_VP991_DT_v2.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
427 downloads
0 comments
Updated
-
Batman Dark Knight_v2_DT_physmod5.zip
By coolball
Desktop Mod for Batman Dark Knight FS (physmod5) version 2.vpt by 85vett / (coolball for the Desktop-Patch)
Thank you 85vett for this great table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Batman Dark Knight FS (physmod5) version 2.vpt" / http://vpuniverse.com/forums/files/download/2989-batman-dark-knight/
Use the Mod: "Batman Dark Knight_v2_DT_physmod5"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
496 downloads
0 comments
Updated
-
Avengers_v1.2bDT
By coolball
Desktop Patch for Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt by gtxjoe (coolball for the Desktop-Patch)
Thank you very much gtxjoe for this fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt" / http://vpuniverse.com/forums/files/file/2830-avengers-pro-stern-2012-gtxjoe-fs-vp921-vp990/
Use the Mod: "Avengers_v1.2bDT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
591 downloads
0 comments
Updated
-
PotC_v1.4b_VP99_DT.zip
By coolball
Desktop Patch for Pirates Of the Caribbean.vpt by 85Vett (coolball for the Desktop-Patch)
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
I'm not really happy with the Flipper settings, maybe someone can help with better settings.
Need a better placed wall (for this desktop version at the plank to prevent ball from getting stuck behind bumper.
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Pirates Of the Caribbean.vpt" /http://vpuniverse.com/forums/files/file/2458-pirates-of-the-caribbean-stern-2006-85vett-fs-12/
Use the Mod: "PotC_v1.4b_VP99_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
607 downloads
- VPUPatch
- Pirates of the Caribbean
- (and 3 more)
0 comments
Updated
-
Metallica DT 1.0 PM5
By RobbyKingPin
Desktop Patch for Metallica Pro FS PM5 1.0 by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Metallica Pro FS PM5 / http://vpuniverse.com/forums/files/file/3730-metallica-pro-fs-pm5/
Use the Mod: "Metallica Pro DT 1.0 PM5.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
345 downloads
- Metallica Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
Transformers_v1.2_VP9.9_DT.zip
By coolball
Desktop Patch for Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt (coolball for the Desktop-Patch)
Thank you freneticamnesic and gtxjoe for the ultimate power of your table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt" / http://vpuniverse.com/forums/files/file/3013-transformers-pro-stern-2011-fs-vp99-gtxjoe-freneticamnesic/
Use the Mod: "Transformers_v1.2_VP9.9_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
415 downloads
0 comments
Updated
-
Star Trek Pro Mod PM5 (Stern 2013)
By RobbyKingPin
Desktop Patch for Star Trek Pro Mod PM5 (Stern 2013) 1.0
Thank you gtxjoe &85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: " Star Trek Pro Mod PM5 (Stern 2013) 1.0 http://vpuniverse.com/forums/files/file/4020-star-trek-pro-mod-pm5-stern-2013/
Use the Mod: "Star Trek Pro Mod PM5 012216.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
236 downloads
- Star Trek Pro
- Star Trek
- (and 5 more)
0 comments
Submitted
-
Big Buck Hunter_v2_DT_physmod5.zip
By coolball
Desktop Patch for Big Buck Hunter FS (physmod5 version 2).vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett and the helpers ASOT, GTXJOE, kanario40 and dark for this great table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Big Buck Hunter FS (physmod5 version 2).vpt" / http://vpuniverse.com/forums/files/file/3020-big-buck-hunter-pro/
Use this Mod: "Big Buck Hunter_v2_DT_physmod5.dif" and have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
352 downloads
0 comments
Updated
-
The Walking Dead PRO Physmod 5 WIP 1.1
By RobbyKingPin
Desktop Patch for The Walking Dead PRO Physmod 5 WIP 1.1 by gtxjoe
Thank you gtxjoe for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "The Walking Dead Pro Physmod5 WIP 1.1 /http://vpuniverse.com/forums/files/file/3813-the-walking-dead-pro-physmod5-11/
Use the Mod: "The Walking Dead Pro Physmod5 1.1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
275 downloads
- The Walking Dead Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
WPT_v1.1_PM5_DT.zip
By coolball
Desktop Patch for WPT (Stern 2006) freneticamnesic PM5 1.1.vpt by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Thank you Wildman for your sharp Backglass.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "WPT (Stern 2006) freneticamnesic PM5 1.1.rar" / http://vpuniverse.com/forums/files/file/3069-world-poker-tour-stern-2006/
Use the Mod: "WPT_v1.1_ PM5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
319 downloads
0 comments
Updated
-
Spiderman (Stern 2007) (DT) VPUPatch
By coolball
Desktop Patch for Spiderman Stern 1-01.zip by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Spiderman Stern 1-01.zip" / http://vpuniverse.com/forums/files/file/2743-spiderman-fs-stern-2007-85vett/
Use the Mod: "Spidermandesk2.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
366 downloads
0 comments
Updated
-
X-Men (Stern 2012) (DT) VPUPatch
By coolball
Desktop Patch for XMen FS 1-02.zip by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "XMen FS 1-02.zip" / http://vpuniverse.com/forums/files/file/2679-x-men-pro-stern-2012-85vett/
Use the Mod: "XMENdesk1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
457 downloads
0 comments
Updated
-
Elvis_NightMod_PhysMod_1.0b_DT.zip
By coolball
Desktop Patch for Elvis_NightMod_PhysMod_1.0.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the King of Rock'n Roll table and the permission to mod.
Thanks Credits:
JP: Original Table and Scriptw li
Johanpsu: Sound Samples used in the original
Dark: Primitive bolts and screws used
Zany: Primitive Flasher Domes, Lamp Lights, Bumper Caps, and Wire Rings used
LoadedWeapon: Reworked Images, New ramps, Apron, Updated with neghting and updated script etc..
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Elvis_NightMod_PhysMod_1.0.vpt" / http://vpuniverse.com/forums/files/file/3186-elvis-nightmod-stern-2004-fs-physmod/
Use the Mod: "Elvis_NightMod_PhysMod_1.0b_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
165 downloads
0 comments
Updated
-
Mustang Pro WIP
By RobbyKingPin
Desktop Patch for Mustang Pro WIP by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Mustang Pro WIP /http://vpuniverse.com/forums/files/file/3731-mustang-pro/
Use the Mod: "Mustang Pro WIP.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
162 downloads
- Mustang Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
WWF_RR_v1.0_PM5_DT.zip
By coolball
Desktop Patch for WWF Royal Rumble (Physmod5).vpt by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod.
Thank you Wildman for the sharp Backglass
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
- New Backglass (by Wildman)
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "WWF Royal Rumble (Physmod5).vpt" / http://vpuniverse.com/forums/files/file/3006-wwf-royal-rumble-data-east-1994/
Use the Mod: "WWF_RR_v1.0_PM5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
272 downloads
0 comments
Updated
-
24_v1.12_DT.zip
By coolball
Desktop Patch for 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "24 (Stern 2009) freneticamnesic v1.12.rar" / http://vpuniverse.com/forums/files/file/2876-24-stern2009freneticamnesicfsvp990/
Use the Mod: "24_v1.12_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
285 downloads
0 comments
Updated
-
Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic)
By RobbyKingPin
Desktop Patch for Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1 http://vpuniverse.com/forums/files/file/3141-indiana-jones-stern-2008-physmod5-freneticamnesic/
Use the Mod: "Indiana Jones (Stern 2008).dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.1 - added new Backdrop - change the values to create a desktop version
187 downloads
- Indiana Jones
- Sterm
- (and 4 more)
0 comments
Updated
-
Eight Ball Deluxe_physmod5_DT.zip
By coolball
Desktop Patch for Eight Ball Deluxe_physmod5.vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85Vett for this great old table and the permission to mod.
and thank you Gordon, that you help to solved the white dot problem.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Eight Ball Deluxe_physmod5.vpt" / http://vpuniverse.com/forums/files/file/2966-eight-ball-deluxe-fs/
Use the Mod: "Eight Ball Deluxe_physmod5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
222 downloads
0 comments
Updated
-
Jurassic Park - The Lost World_v1.1(PM5)_DT.dif
By coolball
Desktop Patch for Jurassic Park The Lost World (Sega) (1997)(Edizzle)(FS)(PM5).vpt by Edizzle (coolball for the Desktop-Patch)
Thank you Edizzle and all the involved people for this great new version and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Jurassic Park The Lost World (Sega) (1997)(Edizzle)(FS)(PM5).vpt" / http://vpuniverse.com/forums/files/file/3177-jurassic-park-the-lost-world-sega-1997-pm5/
Use the Mod: "Jurassic Park - The Lost World_v1.1(PM5)_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
210 downloads
0 comments
Submitted
-
Iron Man (Stern 2010)(DT) VPUPatch
By coolball
Desktop Patch for Ironman FS 1.04.zip by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Ironman FS 1.04.zip" / http://vpuniverse.com/forums/files/file/2470-iron-man-stern-2010-85vett/
Use the Mod: "Ironmandesk1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
460 downloads
0 comments
Updated
-
Avatar_physmod5_DT.zip
By coolball
Desktop Mod for Avatar physmod5.vpt by 85Vett coolball for the Desktop-Patch)
Thank you 85vett for this fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avatar physmod5.vpt" / http://vpuniverse.com/forums/files/download/2565-avatar-stern-2010-85vett/
Use the Mod: "Avatar_physmod5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
253 downloads
0 comments
Updated
-
Corvette DT (physmod5)_v2.zip
By coolball
Desktop Mod for Corvette FS (physmod5) Version 2.vpt by 85vett / (coolball for the Desktop-Patch)
Thank you 85vett for this fast table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Corvette FS (physmod5) Version 2.vpt" / http://vpuniverse.com/forums/files/download/2997-corvette-fs-bally-1994-85vett/
Use the Mod: "Corvette DT (physmod5)_v2.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
335 downloads
0 comments
Submitted
-
LastActionHero_v1.2_DT_physmod5.zip
By coolball
Desktop Patch for Last Action Hero (Data East 1994)FS_physmod5_rev.1.2 by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for this beautiful table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Last Action Hero (Data East 1994)FS_physmod5_rev.1.2.rar" / http://vpuniverse.com/forums/files/file/2889-last-action-hero-data-east-1994-fs/
Use the Mod: "LastActionHero_v1.2_DT_physmod5.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
259 downloads
0 comments
Updated