Jump to content
  • What's Next?

     

     

VPU Patching System - Table Modifications (DT)

  1. All
  2. A
  3. B
  4. C
  5. D
  6. E
  7. F
  8. G
  9. H
  10. I
  11. J
  12. K
  13. L
  14. M
  15. N
  16. O
  17. P
  18. Q
  19. R
  20. S
  21. T
  22. U
  23. V
  24. W
  25. X
  26. Y
  27. Z
  28. #

107 files

  1. AC-DC_PhysMod5_Helen_v.1.1c_DT.zip

    Desktop Patch for AC-DC_PhysMod5_Helen_rev.1.1c.vpt by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the fantastic table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "AC-DC_PhysMod5_Helen_rev.1.1c.vpt" / http://vpuniverse.com/forums/files/file/3117-acdc-stern-2012/
    Use the Mod: "AC-DC_PhysMod5_Helen_v.1.1c_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    620 downloads

       (1 review)

    0 comments

    Updated

  2. PotC_v1.4b_VP99_DT.zip

    Desktop Patch for Pirates Of the Caribbean.vpt by 85Vett (coolball for the Desktop-Patch)
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    I'm not really happy with the Flipper settings, maybe someone can help with better settings.
    Need a better placed wall (for this desktop version at the plank to prevent ball from getting stuck behind bumper.
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Pirates Of the Caribbean.vpt" /http://vpuniverse.com/forums/files/file/2458-pirates-of-the-caribbean-stern-2006-85vett-fs-12/
    Use the Mod: "PotC_v1.4b_VP99_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    607 downloads

       (0 reviews)

    0 comments

    Updated

  3. Avengers_v1.2bDT

    Desktop Patch for Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt by gtxjoe (coolball for the Desktop-Patch)
    Thank you very much gtxjoe for this fantastic table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt" / http://vpuniverse.com/forums/files/file/2830-avengers-pro-stern-2012-gtxjoe-fs-vp921-vp990/
    Use the Mod: "Avengers_v1.2bDT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    591 downloads

       (0 reviews)

    0 comments

    Updated

  4. Batman Dark Knight_v2_DT_physmod5.zip

    Desktop Mod for Batman Dark Knight FS (physmod5) version 2.vpt by 85vett / (coolball for the Desktop-Patch)
    Thank you 85vett for this great table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Batman Dark Knight FS (physmod5) version 2.vpt" / http://vpuniverse.com/forums/files/download/2989-batman-dark-knight/
    Use the Mod: "Batman Dark Knight_v2_DT_physmod5"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    496 downloads

       (1 review)

    0 comments

    Updated

  5. Iron Man (Stern 2010)(DT) VPUPatch

    Desktop Patch for Ironman FS 1.04.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Ironman FS 1.04.zip" / http://vpuniverse.com/forums/files/file/2470-iron-man-stern-2010-85vett/
    Use the Mod: "Ironmandesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    460 downloads

       (0 reviews)

    0 comments

    Updated

  6. X-Men (Stern 2012) (DT) VPUPatch

    Desktop Patch for XMen FS 1-02.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "XMen FS 1-02.zip" / http://vpuniverse.com/forums/files/file/2679-x-men-pro-stern-2012-85vett/
    Use the Mod: "XMENdesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    457 downloads

       (0 reviews)

    0 comments

    Updated

  7. Family Guy_BETA_VP991_DT.zip

    Desktop Patch for Family Guy_BETA_VP991.vpt by Gronimod (coolball for the Desktop-Patch)
     
    Thank you Groni for the fantastic table and the permission to mod.
    Thank you 85vett for this amazing tutorial for the Miniplayfield
     
    Changes i´ve done
     
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flasher
    - Miniplayfield flasher
     
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Family Guy_BETA_VP991.rar" / http://vpuniverse.com/forums/files/file/3214-family-guy-beta-version-groni-pinball-vp991/
    Use the Mod: "Family Guy_BETA_VP991_DT_v2.dif"
    Have fun
     
    To Apply a patch:
     
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
     

    If you have made any changes to the original table release then this patch will not work.

    427 downloads

       (3 reviews)

    0 comments

    Updated

  8. Tron (Stern 2011) (DT) VPUPatch

    Desktop Patch for Tron FS 1-4.vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Tron FS 1-4.vpt" / http://vpuniverse.com/forums/files/file/2624-tron-le-stern-201185vett/
    Use the Mod: "Trondesk1.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    425 downloads

       (0 reviews)

    0 comments

    Updated

  9. Transformers_v1.2_VP9.9_DT.zip

    Desktop Patch for Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt (coolball for the Desktop-Patch)
    Thank you freneticamnesic and gtxjoe for the ultimate power of your table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt" / http://vpuniverse.com/forums/files/file/3013-transformers-pro-stern-2011-fs-vp99-gtxjoe-freneticamnesic/
    Use the Mod: "Transformers_v1.2_VP9.9_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    415 downloads

       (1 review)

    0 comments

    Updated

  10. Avatar_v1.01b_DT.zip

    Desktop Mod for Avatar (Stern) (2010) (85vett).vpt by 85Vett and dup3d(for the BMPRlite2 Mod) / (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Thank you dup3d for the permission to use your BMPRlite2 Mod.
    I used the Avatar Table by 85vett and the BMPRlite2 Mod by dup3d to create the Desktop-Patch.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avatar (Stern) (2010) (85vett).vpt"
    Use the Mod: "Avatar_v1.01b_DT.zip"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    398 downloads

       (0 reviews)

    0 comments

    Updated

  11. Spiderman (Stern 2007) (DT) VPUPatch

    Desktop Patch for Spiderman Stern 1-01.zip by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Spiderman Stern 1-01.zip" / http://vpuniverse.com/forums/files/file/2743-spiderman-fs-stern-2007-85vett/
    Use the Mod: "Spidermandesk2.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    366 downloads

       (0 reviews)

    0 comments

    Updated

  12. Big Buck Hunter_v2_DT_physmod5.zip

    Desktop Patch for Big Buck Hunter FS (physmod5 version 2).vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett and the helpers ASOT, GTXJOE, kanario40 and dark for this great table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Big Buck Hunter FS (physmod5 version 2).vpt" / http://vpuniverse.com/forums/files/file/3020-big-buck-hunter-pro/
    Use this Mod: "Big Buck Hunter_v2_DT_physmod5.dif" and have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    352 downloads

       (1 review)

    0 comments

    Updated

  13. Metallica DT 1.0 PM5

    Desktop Patch for Metallica Pro FS PM5 1.0 by 85vett
     
    Thank you 85vett for the fantastic table and the permission to mod your table.
     
    Changes i´ve done
     
    - added new Backdrop
    - change the values to create a desktop version
     
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.co...ch-32bit-64bit/
    Download the original Table: "Metallica Pro FS PM5 / http://vpuniverse.com/forums/files/file/3730-metallica-pro-fs-pm5/
    Use the Mod: "Metallica Pro DT 1.0 PM5.dif"
    Have fun
     
    To Apply a patch:
     
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
     
    If you have made any changes to the original table release then this patch will not work.

    345 downloads

       (3 reviews)

    0 comments

    Submitted

  14. Corvette DT (physmod5)_v2.zip

    Desktop Mod for Corvette FS (physmod5) Version 2.vpt by 85vett / (coolball for the Desktop-Patch)
    Thank you 85vett for this fast table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Corvette FS (physmod5) Version 2.vpt" / http://vpuniverse.com/forums/files/download/2997-corvette-fs-bally-1994-85vett/
    Use the Mod: "Corvette DT (physmod5)_v2.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    335 downloads

       (0 reviews)

    0 comments

    Submitted

  15. WPT_v1.1_PM5_DT.zip

    Desktop Patch for WPT (Stern 2006) freneticamnesic PM5 1.1.vpt by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Thank you Wildman for your sharp Backglass.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "WPT (Stern 2006) freneticamnesic PM5 1.1.rar" / http://vpuniverse.com/forums/files/file/3069-world-poker-tour-stern-2006/
    Use the Mod: "WPT_v1.1_ PM5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    319 downloads

       (2 reviews)

    0 comments

    Updated

  16. XMen_physmod5_DT.zip

    Desktop Patch for XMen FS (physmod5).vpt by 85Vett (coolball for the Desktop-Patch)
    Thank you 85vett for this great physmod and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "XMen FS (physmod5).vpt" / http://vpuniverse.com/forums/files/download/2679-x-men-pro-stern-2012-85vett/
    Use this Mod: "XMen_physmod5_DT.dif" and have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    294 downloads

       (1 review)

    0 comments

    Updated

  17. 24_v1.12_DT.zip

    Desktop Patch for 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "24 (Stern 2009) freneticamnesic v1.12.rar" / http://vpuniverse.com/forums/files/file/2876-24-stern2009freneticamnesicfsvp990/
    Use the Mod: "24_v1.12_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    285 downloads

       (0 reviews)

    0 comments

    Updated

  18. The Walking Dead PRO Physmod 5 WIP 1.1

    Desktop Patch for The Walking Dead PRO Physmod 5 WIP 1.1 by gtxjoe

    Thank you gtxjoe for the fantastic table and the permission to mod your table.

    Changes i´ve done

    - added new Backdrop
    - change the values to create a desktop version

    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.co...ch-32bit-64bit/
    Download the original Table: "The Walking Dead Pro Physmod5 WIP 1.1 /http://vpuniverse.com/forums/files/file/3813-the-walking-dead-pro-physmod5-11/
    Use the Mod: "The Walking Dead Pro Physmod5 1.1.dif"
    Have fun

    To Apply a patch:

    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.

    If you have made any changes to the original table release then this patch will not work.
    What's New in Version Experimental - PhysicsMo (See full changelog)
    1.0 - added new Backdrop - change the values to create a desktop version

    275 downloads

       (3 reviews)

    0 comments

    Submitted

  19. WWF_RR_v1.0_PM5_DT.zip

    Desktop Patch for WWF Royal Rumble (Physmod5).vpt by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod.
    Thank you Wildman for the sharp Backglass
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    - New Backglass (by Wildman)
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "WWF Royal Rumble (Physmod5).vpt" / http://vpuniverse.com/forums/files/file/3006-wwf-royal-rumble-data-east-1994/
    Use the Mod: "WWF_RR_v1.0_PM5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    272 downloads

       (0 reviews)

    0 comments

    Updated

  20. Shrek (Stern) DT Beta v9.9.1

    given that Gronimod has been MIA for a few months,I did not get permission from Gronimod for this mod

    file will be removed if requested.

     
    updates
    - mini playfield lights by 85Vette
    -Center post fix by Aldiode
    - Most if not all of the Shrek images by Ninuzzu

    270 downloads

       (0 reviews)

    0 comments

    Submitted

  21. Indiana Jones_Stern_v1.0_Phsy5_DT.zip

    Desktop Patch for ndiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1 by freneticamnesic (coolball for the Desktop-Patch)
    Thank you freneticamnesic for the fantastic table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    - Special Thanks to freneticamnesic for help me with the yellow flasher
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Indiana Jones (Stern 2008).rar" / http://vpuniverse.com/forums/files/file/3141-indiana-jones-stern-2008-physmod5-freneticamnesic/
    Use the Mod: "Indiana Jones_Stern_v1.0_Phsy5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    267 downloads

       (0 reviews)

    0 comments

    Updated

  22. World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)Dt Wsvp99X

    Thank you bodydump for the super table and the permission to mod your table.
    Changes I have done.
    - created new Backdrop
    - changed the values to create a desktop version
    - added and adjusted rails and side walls
    - adjusted plunger ramp to fit
    Updated to 1.02
    I felt the outside walls and rails were not high enough to allow the virtual glass to be above all the table elements so I raised them as much as possible.
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)(FS MOD) @ http://vpuniverse.com/forums/files/file/2593-world-cup-soccer-bally1994bmiki75-koadic-bodydump-bent9812fs-mod/
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    266 downloads

       (0 reviews)

    0 comments

    Updated

  23. LastActionHero_v1.2_DT_physmod5.zip

    Desktop Patch for Last Action Hero (Data East 1994)FS_physmod5_rev.1.2 by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for this beautiful table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Last Action Hero (Data East 1994)FS_physmod5_rev.1.2.rar" / http://vpuniverse.com/forums/files/file/2889-last-action-hero-data-east-1994-fs/
    Use the Mod: "LastActionHero_v1.2_DT_physmod5.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    259 downloads

       (0 reviews)

    0 comments

    Updated

  24. Avatar_physmod5_DT.zip

    Desktop Mod for Avatar physmod5.vpt by 85Vett coolball for the Desktop-Patch)
    Thank you 85vett for this fantastic table and the permission to mod your table.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "Avatar physmod5.vpt" / http://vpuniverse.com/forums/files/download/2565-avatar-stern-2010-85vett/
    Use the Mod: "Avatar_physmod5_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
    b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
    c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
    d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
    e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
    f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
    If you have made any changes to the original table release then this patch will not work.

    253 downloads

       (1 review)

    0 comments

    Updated

  25. CSI_VP99_Physmod5_rev1.0_DT.zip

    Desktop Patch for CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt by Javier15 (coolball for the Desktop-Patch)
    Thank you Javier15 for the TOP table and the permission to mod.
    Changes i´ve done
    - added new Backdrop
    - change the values to create a desktop version
    - adjusts the flashers
    Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
    http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
    Download the original Table: "CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt" / http://vpuniverse.com/forums/files/file/3108-csi-stern-2008/
    Use the Mod: "CSI_VP99_Physmod5_rev1.0_DT.dif"
    Have fun
    To Apply a patch:
    a. If you do not already have the table that the patch was created for; you will need to download that file.
    Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.

    252 downloads

       (0 reviews)

    0 comments

    Submitted


×
  • Create New...