-
What's Next?
VPU Patching System - Table Modifications (DT)
107 files
-
0 comments
Submitted
-
0 comments
Submitted
-
WPT_v1.1_PM5_DT.zip
By coolball
Desktop Patch for WPT (Stern 2006) freneticamnesic PM5 1.1.vpt by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Thank you Wildman for your sharp Backglass.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "WPT (Stern 2006) freneticamnesic PM5 1.1.rar" / http://vpuniverse.com/forums/files/file/3069-world-poker-tour-stern-2006/
Use the Mod: "WPT_v1.1_ PM5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
319 downloads
0 comments
Updated
-
0 comments
Submitted
-
VPUPatch Road Kings (Williams 1986) v1.0 DT WSVP99x
By Stevoz
Thank you sliderpoint for the funtastic table and the permission to mod your table.
Thank you freneticamnesic for fixing a transparency issue with the left rail image.
Changes I have done.
- added new Backdrop
- changed the values to create a desktop version
- adjusted rails and side walls
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: Road Kings (Williams 1986) SPv1 FS VP99x PM5 1 @ http://vpuniverse.com/forums/files/file/3054-road-kings-williams-1986-spv1-fs-vp99x-pm5/
This is the VP9.9x mod use this file as the Original Table
Road Kings (Williams 1986) SPv1 FS VP99x.vpt
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
124 downloads
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)Dt Wsvp99X
By Stevoz
Thank you bodydump for the super table and the permission to mod your table.
Changes I have done.
- created new Backdrop
- changed the values to create a desktop version
- added and adjusted rails and side walls
- adjusted plunger ramp to fit
Updated to 1.02
I felt the outside walls and rails were not high enough to allow the virtual glass to be above all the table elements so I raised them as much as possible.
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: World Cup Soccer (Bally)(1994)(Bmiki75 Koadic Bodydump Bent98)(1.2)(FS MOD) @ http://vpuniverse.com/forums/files/file/2593-world-cup-soccer-bally1994bmiki75-koadic-bodydump-bent9812fs-mod/
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
266 downloads
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Avengers_v1.2bDT
By coolball
Desktop Patch for Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt by gtxjoe (coolball for the Desktop-Patch)
Thank you very much gtxjoe for this fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt" / http://vpuniverse.com/forums/files/file/2830-avengers-pro-stern-2012-gtxjoe-fs-vp921-vp990/
Use the Mod: "Avengers_v1.2bDT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
591 downloads
0 comments
Updated
-
0 comments
Submitted
-
CSI_VP99_Physmod5_rev1.0_DT.zip
By coolball
Desktop Patch for CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the TOP table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "CSI (Stern 2008)_VP99_Physmod5_rev1.0.vpt" / http://vpuniverse.com/forums/files/file/3108-csi-stern-2008/
Use the Mod: "CSI_VP99_Physmod5_rev1.0_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
252 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Metallica DT 1.0 PM5
By RobbyKingPin
Desktop Patch for Metallica Pro FS PM5 1.0 by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Metallica Pro FS PM5 / http://vpuniverse.com/forums/files/file/3730-metallica-pro-fs-pm5/
Use the Mod: "Metallica Pro DT 1.0 PM5.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
345 downloads
- Metallica Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
AC-DC_PhysMod5_Helen_v.1.1c_DT.zip
By coolball
Desktop Patch for AC-DC_PhysMod5_Helen_rev.1.1c.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "AC-DC_PhysMod5_Helen_rev.1.1c.vpt" / http://vpuniverse.com/forums/files/file/3117-acdc-stern-2012/
Use the Mod: "AC-DC_PhysMod5_Helen_v.1.1c_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
620 downloads
0 comments
Updated
-
Mustang Pro WIP
By RobbyKingPin
Desktop Patch for Mustang Pro WIP by 85vett
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Mustang Pro WIP /http://vpuniverse.com/forums/files/file/3731-mustang-pro/
Use the Mod: "Mustang Pro WIP.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
162 downloads
- Mustang Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
The Walking Dead PRO Physmod 5 WIP 1.1
By RobbyKingPin
Desktop Patch for The Walking Dead PRO Physmod 5 WIP 1.1 by gtxjoe
Thank you gtxjoe for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "The Walking Dead Pro Physmod5 WIP 1.1 /http://vpuniverse.com/forums/files/file/3813-the-walking-dead-pro-physmod5-11/
Use the Mod: "The Walking Dead Pro Physmod5 1.1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
275 downloads
- The Walking Dead Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
0 comments
Submitted
-
24_v1.12_DT.zip
By coolball
Desktop Patch for 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "24 (Stern 2009) freneticamnesic v1.12.rar" / http://vpuniverse.com/forums/files/file/2876-24-stern2009freneticamnesicfsvp990/
Use the Mod: "24_v1.12_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
285 downloads
0 comments
Updated
-
Sharkey_v1.0_DT.zip
By coolball
Desktop Patch for Sharkey's Shootout (Stern 2000) (freneticamnesic) (FS) 1 by freneticamnesic (coolball for the Desktop-Patch)
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Sharkey's Shootout (Stern 2000).rar" / http://vpuniverse.com/forums/files/file/2821-sharkeys-shootout-stern-2000-freneticamnesic-fs/
Use the Mod: "Sharkey_v1.0_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
167 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic)
By RobbyKingPin
Desktop Patch for Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1
Thank you freneticamnesic for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "Indiana Jones (Stern 2008) (Physmod5) (freneticamnesic) 1.1 http://vpuniverse.com/forums/files/file/3141-indiana-jones-stern-2008-physmod5-freneticamnesic/
Use the Mod: "Indiana Jones (Stern 2008).dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.1 - added new Backdrop - change the values to create a desktop version
187 downloads
- Indiana Jones
- Sterm
- (and 4 more)
0 comments
Updated