Jump to content
Content Creator Status Updates - Please stop asking and begging for Content Creator Status. (Click Here) ×

  • What's Next?

     

     

Backglass Resources

  1. All
  2. A
  3. B
  4. C
  5. D
  6. E
  7. F
  8. G
  9. H
  10. I
  11. J
  12. K
  13. L
  14. M
  15. N
  16. O
  17. P
  18. Q
  19. R
  20. S
  21. T
  22. U
  23. V
  24. W
  25. X
  26. Y
  27. Z
  28. #

548 files

  1. More information about "NBA Fastbreak (Bally 1997) - 16:9 Backgrounds for B2S Backglass"

    NBA Fastbreak (Bally 1997) - 16:9 Backgrounds for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @ryguy417 is not included but it can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Two 1920x1080 backgrounds for this table's backglass
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    1. Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds]
    2. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png
    3. If you don't have a .res B2S file already present for this table, then generate one. Follow these steps:
     • Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES.
     • The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. 
     • Click SAVE SETTINGS.
     • A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right.
    4. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers).
    5. Copy the .res settings I included below and replace the ones in your file. 
    6. Changes to make:
     • Change line 10 to match whatever the number is of your display that shows the backglass.
     • Change line 29 to match your folder structure and name of the background file.
    7. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE.
    8. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.
     
     
    IV. Sample .res Settings
    Below are the my .res settings for this table.
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VP10\Backgrounds\nbafastbreak02-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    53 downloads

       (0 reviews)

    0 comments

    Updated

  2. More information about "Eight Ball Deluxe (Bally 1982) - 16:9 Background for B2S Backglass"

    Eight Ball Deluxe (Bally 1982) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included but it can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked.  Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file.  Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VP10\Backgrounds\eightballdeluxe-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    48 downloads

       (0 reviews)

    0 comments

    Updated

  3. More information about "Lord of the Rings (Stern 2003) - 16:9 Background for B2S Backglass"

    Lord of the Rings (Stern 2003) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass I'm using is not included but can be found here. I've chosen the Tree of Gondor for this background.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Three 1920x1080 background for this table's backglass
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked.  Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file.  Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 2 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VP10\Backgrounds\lotr03-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    26 downloads

       (0 reviews)

    0 comments

    Updated

  4. More information about "Airborne Avenger (Atari 1977) - 16:9 Background for B2S Backglass"

    Airborne Avenger (Atari 1977) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included but it can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Four 1920x1080 backgrounds for this table's backglass (One with the starfield showing behind it, the other clean and without)
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    1. Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.
    IV Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VP10\Backgrounds\airborneavenger01-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    15 downloads

       (0 reviews)

    0 comments

    Updated

  5. More information about "Old Chicago (Bally 1975) - 16:9 Background for B2S Backglass"

    Old Chicago (Bally 1975) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass is not included but Wildman's version can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Two 1920x1080 backgrounds for this table's backglass
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Old Chicago (Bally 1975)\oldchicago-BG01.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    19 downloads

       (1 review)

    0 comments

    Updated

  6. More information about "The Atarians (Atari 1976) - 16:9 Backgrounds for B2S Backglass"

    The Atarians (Atari 1976) - 16:9 Backgrounds for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass is not included but Wildman's version can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Two 1920x1080 backgrounds for this table's backglass
    • Instructions
     
    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked.  Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file.  Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
     
    IV. Sample .res Settings
    Below are the my .res settings for this table.
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Atarians (Atari 1976)\atarians-BG01.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    60 downloads

       (1 review)

    4 comments

    Updated

  7. More information about "T'eed Off (Gottlieb 1993) - 16:9 Background for B2S Backglass"

    T'eed Off (Gottlieb 1993) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass is not included but it can be found at here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot on this page shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png. If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Tee'd Off (Gottlieb 1993)\teedoff-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    29 downloads

       (0 reviews)

    0 comments

    Updated

  8. More information about "Jive Time (Williams 1970) - 16:9 Background for B2S Backglass"

    Jive Time (Williams 1970) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass is not included but it does come packaged with @rothbauerw's table, which can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot on this page shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Jive Time (Williams 1970)\jivetime-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    23 downloads

       (0 reviews)

    0 comments

    Submitted

  9. More information about "Mortadelo (Spain) (Clever & Smart RESKIN Table)"

    Mortadelo (Spain) (Clever & Smart RESKIN Table)

    By icepinball

    Here the Spanish original backglass for the Spanish pinball fans Mortadelo .... for the (Clever & Smart RESKIN Table)
     
    Aquí está el backglass original español para los aficionados al pinball español Mortadelo .... para la (Clever & Smart RESKIN Table)

    32 downloads

       (1 review)

    0 comments

    Submitted

  10. More information about "Teacher's Pet (Williams 1965) - 16:9 Background for 4:3 B2S Backglass"

    Teacher's Pet (Williams 1965) - 16:9 Background for 4:3 B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass is not included but it does come packaged with @loserman76's table. The original table can be found here and the patch can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot on this page shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Teacher's Pet (Williams 1965)\tracherspet-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off
     

    12 downloads

       (0 reviews)

    0 comments

    Submitted

  11. More information about "Robocop (Data East 1989) - 16:9 Background for B2S Backglass"

    Robocop (Data East 1989) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @walterwhiteis not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Two 1920x1080 backgrounds for this table's backglass: one with a beveled edge and one without
    • Instructions

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Robocop (Data East 1989)\robocop-BG01.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    23 downloads

       (0 reviews)

    0 comments

    Submitted

  12. More information about "Addams Family (Bally 1992) - 16:9 Background for B2S Backglass"

    Addams Family (Bally 1992) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions including sample .res settings

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Addams Family (Bally 1992)\addamsfamily-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    84 downloads

       (0 reviews)

    0 comments

    Updated

  13. More information about "Star Trek (25th Anniversary) (Data East 1991) - 16:9 Background for B2S Backglass"

    Star Trek (25th Anniversary) (Data East 1991) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • A 1920x1080 background for this table's backglass
    • Instructions including sample .res settings

    III. Instructions
    Everyone's setup is different, so these instructions are general. Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Star Trek (Data East 1991)\startrek1991-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    36 downloads

       (0 reviews)

    0 comments

    Submitted

  14. More information about "Star Trek - The Next Generation (Williams 1993) - 16:9 Backgrounds for B2S Backglass"

    Star Trek - The Next Generation (Williams 1993) - 16:9 Backgrounds for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    • Two 1920x1080 background for this table's backglass: Command Red or Science Blue.
    • Instructions including sample .res settings

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Star Trek - The Next Generation (Williams 1993)\sttng01-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off

    57 downloads

       (0 reviews)

    0 comments

    Submitted

  15. More information about "Pinball Magic (Capcom 1995) - 16:9 Background for B2S Backglass"

    Pinball Magic (Capcom 1995) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    •  Two 1920x1080 backgrounds for this table's backglass: one with and one without the flourishes on the side curtains.
    • Instructions including sample .res settings

    III. Instructions
    Everyone's setup is different, so these instructions are general. Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Pinball Magic (Capcom 1995)\pinballmagic01-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    16 downloads

       (0 reviews)

    0 comments

    Submitted

  16. More information about "Theatre of Magic (Bally 1995) - 16:9 Background for B2S"

    Theatre of Magic (Bally 1995) - 16:9 Background for B2S

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    •  A 1920x1080 background for this table's backglass
    • Instructions
    • A sample backglass .res file showing my settings

    III. Instructions
    Everyone's setup is different, so these instructions are general.
     
    Put the background .png file in a particular place. I have all my tables in one folder called 'VP10' with the backgrounds in another [my structure is: ~/VisualPinball/Tables/VP10/Backgrounds] Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps:  Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES.  The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked.  Click SAVE SETTINGS.  A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  
     
    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Theatre of Magic (Bally 1995)\theatreofmagic-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    46 downloads

       (0 reviews)

    1 comment

    Updated

  17. More information about "Harlem Globetrotters On Tour (Bally 1979) - 16:9 Background for B2S Backglass"

    Harlem Globetrotters On Tour (Bally 1979) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    •  A 1920x1080 background for this table's backglass
    • Instructions
    • A sample backglass .res file showing my settings

    III. Instructions
    Everyone's setup is different, so these instructions are general. Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration, with the background behind it.  

    IV. Sample .res Settings
    Below are the my .res settings for this table.
     
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Harlem Globetrotters On Tour (Bally 1979)\harlemglobetrotters-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    38 downloads

       (0 reviews)

    0 comments

    Submitted

  18. More information about "Mousin' Around! (Bally 1989) - 16:9 Background for B2S Backglass"

    Mousin' Around! (Bally 1989) - 16:9 Background for B2S Backglass

    By GristleMcTough

    This file is a custom background meant to display behind the B2S backglass. The B2S backglass by @hauntfreaks is not included in this download but can be found here.

    I. Purpose
    Most backglass art is meant to be displayed in a 4:3 aspect ratio, while most monitors are 16:9.  I dislike stretching the backglass to fit my monitor, but didn't want mere black showing on the left and right. I began creating simple, custom backgrounds to thematically tie into the table while not being too visually distracting. The screenshot shows how the backglass now appears on one of my desktop monitors when the table is loaded.

    II. Package
    Included in the download:
    •  A 1920x1080 background for this table's backglass
    • Instructions
    • A sample backglass .res file showing my settings

    III. Instructions
    Everyone's setup is different, so these instructions are general.
    Put the background .png file in the same folder as your table. I have all my tables in individual folders. Rename the file to something you find simple and helpful. All my background files are follow this convention: [tablename]-BG.png If you don't have a .res B2S file already present for this table, then generate one. Follow these steps: Double-click on the B2S file to launch it. When it opens, right-click on it to open the B2S option menu. At the bottom, click the button that says EDIT SCREEN RES. The Screen-Res Editor will now open. In the lower left, make sure GENERATE COMMENTS is checked but ENHANCED RES FILE is unchecked. Click SAVE SETTINGS. A .res file was just generated. Close the Screen-Res Editor by clicking the X in the top right. Open the .res file in a text editor such as Notepad Notepad++ (I prefer this because it has tabs & line numbers). Copy the .res settings I included below and replace the ones in your file. Changes to make: Change line 10 to match whatever the number is of your display that shows the backglass. Change line 29 to match your folder structure and name of the background file. Start the table in VPX. Right-click on the backglass to get the B2S options window. Change BACKGROUND to VISIBLE. Quit and re-launch the table. Your backglass should now show in a 4:3 aspect ration with the background behind it.  

    IV. Sample .res Settings
    Below are the my .res settings for this table.
    # This is a ScreenRes file for the B2SBackglassServer. # From release 1.3.1.1 comment lines like this starting with a '#' are supported. # Playfield Screen resolution width/height 1920 1080 # Backglass width/height 1920 1080 # Define Backglass screen using Display Devicename screen number (\\.\DISPLAY)x or screen coordinates (@x) or screen index (=x) 1 # Backglass x/y position relative to the upper left corner of the screen selected 0 0 # width/height of the B2S (or Full) DMD area 670 346 # x/y position of the B2S (or Full) DMD area - relative to the upper left corner of the backglass window 0 0 # Y-flip, flips the LED display upside down 0 # Background x/y position - relative to the backglass screen - has to be activated in the settings 250 0 # Background width/height 1420 1080 # path to the background image (C:\path\Frame) or black if none selected C:\vPinball\VisualPinball\Tables\VPX\Mousin' Around (Bally 1989)\mousinaround-BG.png # This line would turn off B2SWindowPunch if activated #B2SWindowPunch=off  

    20 downloads

       (0 reviews)

    0 comments

    Updated

  19. More information about "Mask-Overlay-mini puppack"

    Mask-Overlay-mini puppack

    By franck

    Mask-Overlay-mini puppack  a rajouter pour ce qui le desire 

    63 downloads

       (1 review)

    1 comment

    Updated

  20. More information about "BACKGLASS IMAGES FOR PINBALL FX"

    BACKGLASS IMAGES FOR PINBALL FX

    By ZandysArcade

    https://mega.nz/folder/Tdw3TTgR#ZO6hM224_zgBgHcBdutGFw

    169 downloads

       (0 reviews)

    0 comments

    Submitted

  21. More information about "TheWalkingDead(Stern2014) Alt Background"

    TheWalkingDead(Stern2014) Alt Background

    By hanbrujocl

    alternative background image for 
    762179826_TheWalkingDead(Stern2014)-EBv1.vpx 

    20 downloads

       (0 reviews)

    0 comments

    Submitted

  22. More information about "Silverball Mania - backglass frame"

    Silverball Mania - backglass frame

    By Gravy

    Experimental backglass frame intended to display the backglass at a more natural ratio on 16:9 screen with added reflections.  This is intended to be used in conjunction with Hauntfreaks B2S file for this table (example shown framing that particular B2S).

    Click the black square for a preview of the actual frame image, unfortunately the thumbnail crops either side of the image so it just appears black.

    I'd be interested to know if this is something of interest to other players, I may create more if it proves popular.

    See following link for how to add the frame to the backglass. 

    Look for section 3 that starts with:
    "3) New Feature - proportional backglass"
     

    38 downloads

       (0 reviews)

    5 comments

    Updated

  23. More information about "Rush LE (Stern)"

    Rush LE (Stern)

    By soundscape

    Rush Pinball LE (Stern) 2022 Translite

    96 downloads

       (0 reviews)

    0 comments

    Submitted

  24. More information about "Rush Premium (Stern)"

    Rush Premium (Stern)

    By soundscape

    Rush Premium Pinball Translite (Stern) 2022

    50 downloads

       (0 reviews)

    0 comments

    Submitted

  25. More information about "Rush Pro (Stern)"

    Rush Pro (Stern)

    By soundscape

    Translite image for Rush Pro Stern 2022

    61 downloads

       (0 reviews)

    0 comments

    Submitted



About VPUniverse

VPUniverse is a site dedicated to digital pinball simulations and anything pinball in general. Our primary focus is on Digital Pinball formats including Visual Pinball, Future Pinball, and many more pinball simulators. All content is provided on this site for free to all registered members.

Subscriptions are available that allow additional perks; such as reduced download timers and increased download speeds.

Digital Pinball Network - Beware of frauds!

DPNetwork is a network of sites that are fully supported by the Virtual Pinball Community. Support those people who create the content and download ONLY from the following sites. The people that create the content for this hobby post only on the following sites. Any site not listed here; is NOT a vetted site. Always know what you are downloading and from where you are downloading from.

Trusted Sites:

Site Content & Disclaimer

All of the content on this site is created by our community members. Because our community members upload this content for free use; does not give ANYONE permission to re-host files, re-distribute, package, or sell any cabinets or drives with community created content.

By downloading from this site; you agree to not re-host community content, package or re-distribute in any form the content from this site. If you are caught; your membership on VPUniverse.com will be banned without refund.

Contact

VPUniverse Discord

×
×
  • Create New...