Jump to content
  • What's Next?

     

     

Future Pinball Tables

Sub Category  
  1. All
  2. A
  3. B
  4. C
  5. D
  6. E
  7. F
  8. G
  9. H
  10. I
  11. J
  12. K
  13. L
  14. M
  15. N
  16. O
  17. P
  18. Q
  19. R
  20. S
  21. T
  22. U
  23. V
  24. W
  25. X
  26. Y
  27. Z
  28. #

217 files

  1. The Good Bois (Anthias, Original, 2024).

    It's a frontier town, in the wild west. These dogs are determined to clean the place up, and will not rest until they have fetched every outlaw. The Good Bois have rolled into town, if you have any shady dealings, best you skeedaddle right fast, or they'll be barking up your tree in no time!

    43 downloads

       (0 reviews)

    0 comments

    Submitted

  2. Road Runner (Original)

    Road Runner is a great table created by the incredible table developer Roney Pinball.  I decided I wanted to work on a simple table with a simple update so I chose Road Runner.  It didn't take long; however, to determine that it was a bit more sophisticated than I thought.  It has a flyer that explains a few things but not everything.  I decided to write a set of rules since no one had ever posted them before now.  I wrote quite a few rules that filled up both instruction cards on the apron but I was able to add everything I wanted. 
     
    I added FizX Lite 3.0 and the latest version of the FizX tweaker.  An improved version of the lighting tweaker was published on Avatar 2.2.  Since then, Gimli and I have spent much time improving the tweaker.  We found three huge bugs that have been resolved.  Avatar 2.2 had occasions where end users reported getting string errors that have now been resolved.  One bug was caused by Future Pinball sometimes performing calculation errors, like 6 times 10 being equal to 59.9999.  That might be considered close enough but it causes havoc on an array where every two characters in the string represents the saved value for one parameter.  We fixed it by adding rounding for each calculated value to a non-decimal number.  I have noticed that the fix has made the tweaker much more stable without any string errors. 
     
    I have added overlays that describe each of the parameters on the FizX tweaker.  I provide directions on how to navigate the tweaker on the first screen that you see when the tweaker opens.  All you need to remember is to press the Special 1 key to open the tweaker.  If you want a longer description of the Reset to Default, Reset to StartUp, and Save functions, arrow down to the end of the parameters and you will find a detailed description of each.  Unfortunately, the tweaker does not have enough save locations to add settings for the upper flippers.  If you want to change the settings for the upper flippers, they can be changed in the script.  You can, however, change the settings for the main flippers on the tweaker. 
     
    If you are not familiar with FizX, you might find the parameters on the tweaker intimidating.  You will however be able to understand the option for "Bounce Choices".  The option refers to the bounce of the ball off the flippers.  The "Bounce Choices" option allows you to make selections that anyone can understand.  For example, you can select "Low Bounce" or "Medium Bounce".  I recommend you try making changes to this option.  I have already made adjustments on the tweaker but everyone knows I like the flippers to have a very low bounce.  From what I have seen, most folks like higher bounce. 
     
    I didn't add my usual lighting mod this time but I think you will like the lighting nevertheless.  There are lots of options at the beginning of the script where you can change the lighting and other options. 
     
    Zip File – Must Read
     
    There is a zip file included in the download.  It contains the model of a ball with 1K polygons.  Do not unzip the zip file.  Just save it with the same name as the table and place it in the same folder as the table.  If you don't use it, the physics won't be correct.
     
    Table Loading Screen
     
    There are two table-loading textures as listed below.  The first landscape texture is the default and is intended to be used on desktop PCs.  The portrait texture is intended to be used on pinball cabinets. 
     
    LoadingLandscape.jpg
    LoadingPortrait.jpg
     
    Conclusion
     
    The entrance to the right wire ramp was rather problematic.  The ball kept bouncing around the ramp entrance and not going down it.  However, persistence paid off and I managed to get it to work.  This table was otherwise a pleasure to work on.  I hope you enjoy it. 
     
    GeorgeH
     
    List of Changes
     
    1) Added ball/flipper shadows, ball configuration, and ray casting to the script.
    2) Added FizX Lite 3.0. 
    3) Added the latest version of the FizX tweaker which includes a Flipper Bounce Choice option that combines the settings of 3 FizX parameters for each of the 9 bounce choices.
    4) Added overlays to the tweaker that explain each of the FizX parameters. 
    5) Added a HUD Toggle Key that saves settings.
    6) Added new lighting and spotlight with lights turning off when the ball is not in play.
    7) Added new landscape-shaped texture on the table loading screen for desktops and portrait-shaped texture for cabinets.
    😎 Added game room floor and backwall.
    9) Added BAM code that allows the score to exceed 2 billion points. 
    10) Added plunger pull special script to slow down pull-back.
    11) Added new music to attract mode and new background music to all modes. 
    12) Upscaled textures for playfield, backglass, and cabinet. 
    13) Reworked the entrance to the right wire ramp to improve performance.  Adjusted all ramps.
    14) Added rolling ball sounds to the playfield and all four ramps. 
    15) Adjusted the color of all light inserts on the playfield and changed the color on one ramp. 
    16) Added more time to display the text on the segmented display on the backwall so you have time to read it. 
    17) Developed a set of rules which include many of the point values.  Added the rules to the instruction cards on the apron. 
    18) Added desktop camera setting to the script.
     
    Table Developers
     
    Roney Pinball
    Mugsy
    GeorgeH
     
    Contributions by:
    Gimli – Codeveloper of the Tweaker
    JLou5641 - Creator of FizX
    Fleep - Created recordings for mechanical sounds
    TerryRed – Developer of the "All in One" template of FizX

    669 downloads

       (0 reviews)

    9 comments

    Updated

  3. Pi Rats (anthias, original, 2024)

    They say rats desert a sinking ship, but these rats are the ones sinking the ships.

    72 downloads

       (1 review)

    0 comments

    Submitted

  4. Avatar, Neytiri's Revenge (Stern, 2010) (FizX 3.0, DOFLinx MX) (for Cabinets, VR and Desktop PCs)

    When you play this pinball game, your spirit will go with Eywa but your body will stay behind...  Be like Jake Sully, become one with the Na’vi, and immerse yourself into the world of Pandora.  Walk through the dream; I see you!
     
    Alas!  After a year of work by Gimli and myself, version 3.0 of Avatar is finally finished!  Nearly all the visual things that you see in this version are the work of Gimli.  He added several animations, most notably the models of Neytiri and the Sacred Seeds.  He even made the spinning unobtainium rock a bit larger and animated it.  One of the few visual things I added is the purplish pink ball that appears during the Seeds mode.  Gimli liked it so well that he added it to the multiball modes.  Of course, I did the lighting which seems to be my forte.
     
    Gimli and I spent a lot of time working on a menu system that we call tweakers.  This table has three tweakers that have a total of 50 parameters.  To turn the tweakers on, press the Special 1 key repeatedly to cycle through the three tweakers and press the same key again to turn the tweakers off.  Gimli developed a different method for those of you who may have a limited number of keys available on your pinball cabinet.  Cabinet users can press either flipper key to open the tweakers before starting the game.  Once you have the tweaker open, an overlay will appear that has directions on how to navigate through the tweaker using both methods.  There are overlays on both the backbox and the Hud.  The overlays on the backbox will only be displayed if you have the table installed on a cabinet or use virtual reality. 
     
    Gimli created a whole new tweaker for lighting.  You may not notice any dramatic improvements but it reduces the number of save locations that are required.  It made it easier for us to add another parameter we call Playfield Specular lighting.  Gimli decided to remove the old menu system from Version 2.2 and developed a gaming tweaker that has the options from the Version 2.2 menu system of the table and many new options added.  The gaming tweaker has an option called User Profiles that loads preselected options for all the gaming selections.  You will find options that turn all the bells and whistles on or off, along with the preferred setups of Gimli and myself.  I added the latest version of a tweaker for FizX 3.0.  The FizX tweaker has presets for Bounce Choices that automatically load three parameters with nine selections for low to high bounce off the flippers.  The "Bounce Choices" option is great for novices because you can select options that say things like "Low Bounce" or "Medium Bounce" instead of having to figure out how to adjust three different parameters for bounce that have names you probably won't be able to identify.  All the tweakers can be adjusted before the game starts or during the game except for the "Balls Per Game" option on the game tweaker because of a limitation of Future Pinball.  You don't have to remember any of the information I have given you except to press the Special 1 key to open the tweakers.  I added a new feature for each of the tweaker parameters that displays text that provides directions and other information about the option unless the purpose of the parameter is obvious. 
     
    One of the reasons that it took so long to develop this version is Gimli and I fixed three difficult-to-resolve bugs on the tweakers.  Having three different tweakers on one table seemed to make the presence of the bugs more obvious.  Some of the end-users reported problems with string errors when they first played Version 2.2 of the table.  That bug is now gone.  The bugs' resolution has made the tweakers' performance very stable and problem-free. 
     
    This is a video of Avatar that Gimli made using his Virtual Reality set up that provides an overview of the table.
     
    I made this video to demonstrate how to use the tweakers on this table.
     
    Script File (vbs) – Must Read
     
    Many of you have probably heard of DOFLinx.  It is the way guys with pinball cabinets drive lights, addressable LEDs, buzzers, shakers, blowers, etc.  Even though this table has the coding for all that, you can still play it on a desktop PC.  The download contains a file named "DOFLinx.vbs".  If you are a desktop user, save the file to the folder, "C:\Games\Future Pinball\Scripts".  If you don't have a Scripts folder in this location, you need to add it.  If you have a cabinet, don't use this file if you have DOFLinx installed because the "DOFLinx.vbs" may be out of date.  You can use an out-of-date version on a desktop PC without any problem. 
     
    If you don't save the script file to the folder, "C:\Games\Future Pinball\Scripts", you will get error messages and won't be able to play the table. 
     
    Zip File – Must Read
     
    There is a zip file included in the download.  It contains the model of a ball with 1K polygons.  Do not unzip the zip file.  Just save it with the same name as the table and place it in the same folder as the table.  The zip file contains a texture that drives the color DMD.  You still need to use the zip file in this download even if you have already saved a 1K ball to the BAM folder.  If you don't use the zip file from the download, the DMDs will appear white (they are intended to be blue) and the physics won't be as good. 
     
    BAM – Must Read
     
    This table requires BAM version BAM 1.5-363 or later for it to perform as intended and to not crash or generate error messages. 
     
    Options in the Script
     
    This table can be demanding on resources for many PCs.  If you have problems with resources, I wrote a guide on how to reduce resources.  I added it to the beginning of the script because several of the options have to be implemented in the script. 
     
    There are several other areas in the script where I have written comments on how to tweak different parameters. 
     
    Table Loading Screen
     
    There are six table-loading textures as listed below.  The first three landscape textures are intended to be used on desktop PCs.  The last three portrait textures are intended to be used on pinball cabinets. 
     
    LoadingLandscape1.jpg
    LoadingLandscape2.jpg
    LoadingLandscape3.jpg
    LoadingPortrait1.jpg
    LoadingPortrait2.jpg
    LoadingPortrait3.jpg
     
    "Rotated Display" Version
     
    There are two variations of this table. There is a basic version for general PC usage and pinball cabinets. The other version of the table is for use on a desktop PC on a single monitor with a portrait orientation that I call a "rotated display". This version would be of interest to you if your monitor can be turned 90 degrees. Most desktop users tend to use the "Full Table 2" view; however, the table only occupies about 50% of your screen whereas the portrait orientation uses 80 to 90% of your screen. I have figured out a way of creating views using BAM's desktop camera so the views are coded in the script. When you open the tweaker, there is a different camera view that automatically opens which has space to display the overlays. I had to disable the Camera View option on the "rotated display" version because I couldn't make it work otherwise. The only instructions you need for it are:
     
    1) Open the "Video / Rendering Options" menu in FP and change the "Rotation" option to 270 degrees.
    2) Rotate your monitor clockwise 90 degrees and play the table. (You can play it on a landscape monitor and it will appear sideways but you will be able to see what it looks like.)
     
    If you ever replace the monitor on your PC, be sure to get one that has a stand that rotates. I added a screenshot of the normal camera view.
     
    Conclusion
     
    Gimli and I may have gotten a little carried away with the tweakers on this table. However, we persevered through it and after adding 8,000 lines of new code, we succeeded. I think it was worth it. The tweakers have improved a lot. Anyone who wants to use the tweaker code may do so without permission. You can consult Gimli or myself if you have questions. The gameplay is pretty much the same as it was in version 2.2 although I do recall Gimli improved some of the coding for the link multiball (the captive ball under the coffin).
     
    A lot is happening now with Future Pinball. It seems that new technology keeps coming out. This table adds some of the new technology with FizX physics and certainly breaks new ground with three in-game tweakers. I hope you enjoy this new version of Avatar. I have played it hundreds (probably thousands) of times testing all the changes. I can say that I never get tired of playing it.
     
    I hope this makes a nice Christmas present to everyone. Merry Christmas!
     
    George
     
    1. Created In-Game Game Option Tweaker Tool
    2. Revamped the Menu System for desktop, cab, and VR accessed by Special 1 key with instructions on main game DMDs
    3. Three In-Game Tweaks are accessible with each press of the Special 1 key ( Game options, Lighting, and FizX tweakers)
    4. Added Neytiri Model and Animations
    5. Added Seed Models and Animations
    6. Added Bioluminescent Custom Balls that Glow when impacting table objects and in seed mode
    7. Added a slight magnetic field "The Flux Vortex" that diverts slightly when the ball passes from the upper bumpers ( this decreases the frequent and annoying draining of the ball from above)
    8. Removed previous menu system that was added on version 2.1 and cheat codes to simplify the process and hopefully prevent key code conflicts
    9. Multichannel /Multiball Sound For Ball Rolling
    10. Tilt Recovery system.  If you Bump 4 times You will hear "Watch out Hot Rod !". If you wait 5 seconds then Bump Count gets recharged and you can bump again with Tilting.  Jake Will Say "This is Great !"
    11. Added 9 Bounce Profiles under FizX tweaker, Add 5 Game Option Profiles under Game Option Tweaker
    12. Added Easy Mode accessible as the first choice under Game Option Tweaker
    13. Enlarged unobtainium rock and animated it.
    14. Replaced Smoke's rolling ball sound with a new system using a mini-playfield that has separated sounds for the playfield and ramp.  When ball velocity is increased, sound frequency is increased causing a higher pitch.
    15. Upgraded to FizX 3.0 and updated the FizX tweaker to use the new values.
    16. Added overlays that have comments that support the parameters on each of the tweakers.  There is a HUD overlay and one on the backbox which can only be seen on a cabinet or in VR. 
    17. Added a new feature to two of the tweakers where a profile of multiple parameters can be selected (FizX Bounce option and Game Tweaker Profiles).
    18. Added an option for DMD-based high score entry.
    19. Added specular lighting option on the lighting tweaker.
    20. Removed all previous Video coding and redundant overlays and used Pup Video coding to enable videos on the backglass, apron, back box, etc...
    21. Created a new lighting tweaker that uses fewer save locations than the previous version.
    22. Added new lighting options for Wall Brightness, Neytiri Brightness, Spotlight Brightness, and Ball Brightness.
    23. Created a "rotated display" version of this table. 
     
     

    3301 downloads

       (5 reviews)

    54 comments

    Updated

  5. Sin-Di-Cats (Anthias, 2024, Original, BAM)

    kitty crime just got organised.
     
    A game about the feline mafia.

    101 downloads

       (0 reviews)

    2 comments

    Updated

  6. Masters of the Universe: MASTERED Edition (Desktop Only)

    You Have the POWER!!!  with my MASTERED Edition update to "Rom's" excellent "Masters of the Universe" Future Pinball table. This table mod is inspired by SLAMT1LT's tables as well as the newer pinball machines (from JJP, Stern, Heighway Pinball) that now use monitors instead of DMDs.
    A video demonstration that shows off all the features of the MASTERED Edition can be seen here:
     
     
    MASTERED Edition:
     
    - new backglass with various fanart. Formatted specifically to work with 16:9, and 4:3 screens.
    - new full motion video sequences for almost all table actions and modes. These are NEW hi-resolution video clips that now appear on the backglass (and display HUD for desktop users)
    - new info display shown on backglass
    - new sound clips
     
    Watch Prince Adam dance to the beat (and the animated matching flashers) of Castle Multi-Ball!
     
    Experience the thrill of Ripper Multi-Ball.
     
    FEEL the POWER  when you become HE-MAN in He-Man multi-ball.
     
    FEAR Skeletor as he launches his devastating 9-Ball Multi-Ball and watch him laugh at you on the backglass.
     
    Go beyond the days of DMDs and see full hi resolution videos and info displays on the new animated backglass.
     
    Don't be a cheap skate, or Skeletor will get angry!
     
    With 1000's of images, and new sounds...this makes for a MOTU experience like no other, and a Pinball experience found nowhere else!

    2080 downloads

       (0 reviews)

    4 comments

    Submitted

  7. Lizard Harem (Anthias, 2024, original, EM)

    King Goana has a harem full of lizard girls he has charmed from all over the lizard world.
     
    And now, you get to play with them!
     
    An EM original table with GeorgeH's BAM physics.

    106 downloads

       (0 reviews)

    2 comments

    Submitted

  8. Twilight Zone (Bally, 1993)

    Note that BAM (Better Arcade Mode) must be installed for this table to operate properly. 
     
    This table has a menu that is accessed by pressing the Special 2 key. 
     
    Many of the guys who compete in pinball championships consider "Twilight Zone" to be one of the most difficult tables to play.  I suppose that might be true but it is still really fun to play which I think is due to its incredible design.  The FP version of the table was originally built by Francisco666 and the models were built by ROM.  The basic rules are also not all that difficult to remember either.  The center of the playfield has a door with lights around the perimeter.  The lights display most of the available modes.  During game play, one of these lights is usually blinking.  Hitting the bumpers will move the blinking light around the perimeter of the door.  You can start a mode of whatever light is blinking by hitting the kicker under the piano.  The kicker under the slot machine may also start the modes randomly also.  Any mode that you complete will change the blinking light to be lit solid.  There are more rules but this will get you started. 
     
    The quality of the original voice quotes was pretty bad but Francisco probably used the best available audio files at the time.  I reworked the audio to provide a much cleaner sound.  I found about 7 or 8 different versions of audio so I selected the best sounds from each.  The new sounds are included in the new library, DIMENSION_SONIDOS.
     
    When I got to the music, I decided to provide two versions of music libraries in addition to the original music.  All three music libraries have the same name but I changed the case of some of the letters so you can identify the version.  All of the libraries are compatible with the older versions of the table.  You can only save one of these versions of the music to your library folder at a time so you might want to save them the other versions to a subfolder. 
     
    Original Remix - DIMENSION_MUSICA.fpl
    Alternate          - DIMension_musica.fpl
    Rock                 - DIMENSion_musica.fpl
     
    I added Shiva flippers to this table that are switchable to the standard Gimli/George dynamic flippers.  Shiva flippers have more power in the center of the flippers than at the tip and base.  The Gimli/George flippers has the least power at the tip and the most power at the base.  I also added a flipper rotation speed chart that I think will be used for the first time on this table.  I am using a slightly modified version of a chart that JLou5641 developed.  The chart changes the way a flipper accelerates and moves.  It helps to improve the accuracy of the shots.  I recommend that you try the options for physics in the menu shortly after you download the table because it doesn't take long for your mind to get locked into a certain way of playing the table.  There is also menu switchable music that play the original rock song, "The Twilight Zone".  It will replace some of the music selections in the music libraries listed above. 
     
    There are a few changes I made that couldn't be done when the table was created.  The real table has a "power ball" that is made of white ceramic and is much lighter than a steel ball.  When this FP table was built, a white ball was impossible to create so they offered a choice of different colored balls.  For this table, I created a white ball using a photograph of an ceramic ball used on the real table.  I also changed the physics of it when it is released onto the table so it is lighter. 
     
    My friend, AnonTet, performed a lot of testing on this table but he also figured out a way to make the dynamic flippers more efficient.  This became necessary when I tried to add Wild's code that adds a sound when the ball hits the flipper.  Wild also made a change to the model used on the side blades.  He took a model that had the best fit I could find and made it fit perfectly. 
     
    I added two new table loading textures that you can select on the Table Information screen of the FP editor: 
    LoadingLandscape – For desktop usage
    LoadingPortrait – For pinball cabinet usage
     
    Of course, the table has the same lighting options I have added to other tables.  I added a spotlight for the first time on the miniplayfield.  It will probably use it again on other tables. 
     
    Included in the download is a zip file that contains a file that changes the unlit pixels of the DMD.  It changes the color of them to be the same color as the background.  If you choose to use it, it must remain zipped, have the same name as the table and be placed in the same folder as the table. 
     
    You can download a different version of the table that is called "rotated display".  This is for a desktop PC with a single monitor that can be rotated so the monitor is in portrait format.  I added a screenshot of it and the download includes a PDF file with directions.  
     
    Pat Lawlor designed a beautiful table that really needs no enhancements.  If you play this table a lot, you might get tired of the same music so I added some options there.  Even though Slamt1lt added some video and music, the game play of this table is the same as the original.  My objective here was to make the table look, sound and perform better.  I think you will agree that this objective has been met.  I hope you enjoy it!
     
    These are the list of changes:
     
    1. Replaced poorly recorded sounds, including all voice quotes.
    2. Added new instruction cards.
    3. Added custom physics and dynamic flippers with Gimli/GeorgeH flippers and Shiva's flippers.
    4. Added emkickers to the slingshots to improve physics.
    5. Added lighting mod and add Lighting Control Panel to the script.
    6. Added HUD Toggle Key that saves setting.
    7. Added new textures on the table loading screen for both desktop and cabinets.
    8. Added menu system with options for lighting, balls per game, HUD on/off etc.
    9. Added message that looks at BAM version and reminds you to upgrade BAM if needed.
    10. Added shadow maps.
    11. Edited plunger pull special script so you can make the skill shot.
    12. Added switchable option for 3 or 5 balls per game that saves setting.
    13. Added bulbs that provide the halo that shines through the slingshots.
    14. Added side rails with art (sometimes called side blades).
    15. Added bump maps to the camera and slot machine.
    16. Added DMD background color, ball/flipper shadows and ball configuration to the script.
    17. Added rock version of theme music and made it switchable with the default theme music.
    18. Added menu option to switch between Gimli/GeorgeH flippers and Shiva's flippers.
    19. Added menu option to switch table slope so end user can easily change ball speed.
    20. Added menu option to switch bounce control options.
    21. Converted images and video images to use power of 2 to reduce table loading time.
    22.Lowered right ramp to make it perform better.
    23. Added BAM code that allows the score to exceed 2 billion points.
    24. Changed the end of game video so it can be turned off. Also fixed the end of game video so it plays the correct audio file and remove the broken Rod Steiger video.
     
    More detail about the development of this mod is available at this link:
     
    https://pinballnirvana.com/forums/threads/twilight-zone.20208/
     
    George

    2079 downloads

       (0 reviews)

    7 comments

    Submitted

  9. Metal Slug v3.5 (BAM) (FizX)

    -Update by AnonTet (aka rkader on VPUniverse).  Code was added to allow HUD DMD on my behalf (and to turn it on and off ) as AnonTet didn't have time to add it as is on leave until September with blessings for updates in absence. 
    -Special thanks to Brendan for the personal blessing and hats off to all for amazing updates to this game.
    -All files included and where they belong (i.e. PuP folder, BAM cfg file depending on your use and table with associated zip file)
     
    'Wolfanoz - v3.5
    '-- Fixed HUD DMD and DMD to Display warning when nudging game, subsequent display when tilting the game as well on top of sound alert.
    '-- Corrected last score and top score displays.  Was running into other text when displayed on DMD.
    '-- Added Graphics to backglass (games typically have the title on the back glass), changed up the background a bit to the ambiance
    '-- Further DOF tweaks (doesn't sound as loud for some aspects of the table (aka flipper noise))
     
    'AnonTet - v3.0 - FizX Mod
    ' - Thanks go to (in no particular order):
    ' -- Brendan Bailey for the table and the already good update from Dominique
    ' -- JLou for FizX and the code to separate DMDExt dmddevice.ini from the VP DMDdevice.ini
    ' -- Ravarcade for BAM
    ' -- TerryRed for the instructions on how to apply the new inserts
    ' -- JLou for redoing the plastics and apron
    ' -- HUD DMD code added / tested by Wolfanoz

    ' - added FizX
    ' - new inserts
    ' - new Lighting
    ' - small tweaks
    ' - added SSF
    ' - added PUP pack with Options for Backglass
    ' - added a DMD (now dmd extensions can be used)
    ' - added DMD animations for a few actions
    ' - is now possible to choose between DMD or original alphanumeric DispSegs'
    ' - added new voice for plunger
    ' - added sideblades and backwall + textures
    ' - added 2 spinners
    ' - Added a new (side) mission: "Expel the Rebel Army". Hit spinners 100x and win extra ammo... i mean ball.
    ' - added some hintlights to METAL|SLUG|WEAPON targets for better visibility in darker settings
    ' - added general music volume. default is 0.75 but it can be changed with variable MusicVolume
    ' - translite lighting changes
    ' - removed *.fpl dependencies
    ' - sound related changes
    ' - added 3/4 new weapon voices and randomized the calls to them
     
    ' Press N key to change ball looks
    ' Press StartGameKey +
    ' - Letter G: enables/disables old gameroom
    ' - Letter R: rotates new gameroom
    ' - Special2Key: increases brightness
    ' - Special1Key: decreases brightness

    1504 downloads

       (2 reviews)

    33 comments

    Updated

  10. Sonic Pinball Mania (PinEvent V2, FizX 3.3)

    Sonic Pinball Mania (PinEvent V2 - FizX)
     
    Created by: TerryRed
     
    Version 2.0 (Feb 2024)
     
    Get ready for the most EPIC Sonic pinball table ever created... and a pinball game like you've never seen before!
     
    This has everything a Sonic fan could want in one table. Green Hill zone scenery, Sonic Loop ramp, animated bumpers, springs, item box, checkpoint, chaos emerald flashers, red star spinner, launch tunnel, rotating goal sign, moving robots, animated characters such as Sonic / Knuckles / Shadow... and even Dr Robotnik and his eggmobile which will follow your ball with it's spotlight... and much more!
     
    This table takes full advantage of BAM's latest features with full dynamic lighting and ray cast shadows and shadowmaps to create a stunning visual pinball showcase!
     
    What started as a quick BAM mod to update Brendan Bailey's classic Sonic table of 2005 (which was updated by SLAMT1LT in 2014), evolved into a complete overhaul to the entire table. Everything in the table has either been updated or changed, and I've added so many new things (new layout, art, models, lighting, modes, code, fixes, etc) that it's like a new table. Hence... Sonic Pinball Mania.
     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
     
    PinEvent V2
     
    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     
     

     
     
     
    I'm really proud of what I pulled off with this, and I really hope you enjoy it!
     
     
    For an EPIC video preview of this table in action with PinEvent V2 features, check out this video:
     
     
     
     
     
    Thanks of course to these awesome contributors:
     
    TerryRed - Sonic Pinball Mania
    Brendan Bailey (PinWizKid) - created the original Sonic the Hedgehog table in 2005
    SLAMT1LT - sounds, music, code, DMD, etc from his Ultimate mod in 2014
     
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - for FizX and support
    All the FP lads at Pinball Nirvanna for ideas, examples, and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================================
     
     
    This table is single player only.
     
     
    ====================================================================
     
     
    Static Camera Views (desktop mode only)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script

    SONIC BALL
     
    right flipper button will toggle between Sonic and Chrome ball texture (only in attract mode). This can be set in TABLE OPTIONS in the table script
    Plunger and Action Buttons (digital plunger, special 1, special 2)
     
    all buttons/keys will activate Sonic Spin Dash and Magna-Spinner all buttons/keys will act as an autoplunger during gameplay
    Second Stage Flippers
     
    this table supports second stage flippers for cabinet players with this setup this needs to be enabled in TABLE OPTIONS in the table script ensure that your Second Flippers are setup in FP Control Settings ensure that your Special 1 and Special 2 keys / buttons are NOT the same keys / buttons as Second Flippers! (they are by default)
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
     
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================

    15826 downloads

       (41 reviews)

    274 comments

    Updated

  11. RetroFlair - BAM Edition (PinEvent V2, FizX 3.3)

    RetroFlair - Bam Edition (PinEvent V2, FizX)

    Version: 2.2 (Feb 2024)

    This is Rom's classic Future Pinball table the lets us jam to classic Arcade and Amiga tunes.

    I have updated it to my BAM Edition and PinEvent V2 mod to use the newest BAM features to create an amazing real-time visual treat with cool new additions, as well as excellent new mechanical sounds from FLEEP!

    See cool features such as the new PAC-MAN, Outrun, and Speedball modes. New mesh inserts, new RGB G.I. lighting effects, real beacon and spotlights, new shadowmaps, ray cast shadows, and more.


     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
    PinEvent V2

    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     

     
     
    For a video walkthrough of the updates, new features, and all game modes, watch here:
     
     
     
     
    Screenshots:
     

     

     

     

     
     
    Thanks to these awesome contributors:

    ROM: original RetroFlair table build
    TerryRed: BAM Edition table update, PinEvent V2, FizX

    Schlabber34: insert jewel images
    FLEEP: mechanical sounds
    JLou: FizX and support
    ravarcade: BAM and support
    Nailbuster: Pinup Player, PUP DMD, PUP SSF support
    Chris Leathley: Future Pinball


    DISCLAIMER:

    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!


    ====================================================================


    This table is single player only.


    ====================================================================


    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
    Action Buttons - digital plunger, special 1, special 2 (gameplay)
     
    all buttons/keys will act as an autoplunger and an action button during gameplay  
    RGB Animated G.I. Lighting

    Flipper buttons will toggle between Default G.I., and RGB G.I. that will cycle through all colours. This can be done only during attract mode.

     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST “first” disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     

    6742 downloads

       (15 reviews)

    56 comments

    Updated

  12. Star Wars: Death Star Assault - GALACTIC EDITION (PinEvent V2 - FizX 3.3)

    Star Wars: Death Star Assault - GALACTIC EDITION
     
    Original Ultimate Pro table by SLAMT1LT
     
    GALACTIC EDITION by TerryRed
     
    Table version: 1.7 (Feb 2024)
     
     
    A long time ago (2005) on a pinball editor far, far away... this table started its long journey.
     
    First it started as the Sci-Fi Classic example table in 2005. Then SLAMT1LT created his Star Wars mod in 2010, which then evolved over the years to his Ultra version, then his Ultimate version, then finally his Ultimate Pro 1.06 version in 2020. I then updated that table with my Epic Space Battles mod in 2021, and then for PinEvent afterward.
     
    In 2022, I present my massive GALACTIC EDITION update!
     
    This table has been completely updated and modernized to use the newest BAM features to create an amazing real-time visual treat that will blow you away! Almost everything you saw before has been updated to the max (or replaced) and many cool new additions have been added!
     
    Epic Space Battles were just the beginning. This table is so big it requires you to patch FP and BAM to allow them to access 4 GB of ram, just to run it! I highly recommend you watch the "evolution" video below to see many of the new features.
     
     
    This table has been fully updated with FizX for game changing new physics on Future Pinball. The old Future Pinball physics are GONE! FizX uses techniques similar to nFozzy on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
    PinEvent V2

    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.


     
     
    ====================================================
     
     
    Some of the new features and updates:
     
    - complete overhaul of the table to both modernize it and removal of older unused items
    - new light inserts models with normal maps
    - new 4K art for playfield, plastics, decals, apron, backbox, etc
    - new updated shadowmaps for GI, flashers, lightsabers (for new coloured lighting and shadows), and suited for new ray cast shadows
    - new shadow layer overlays that appears over decals, but not over openings on the pf
    - new ambient shadows on the pf and plastics
    - new fully updated lighting
    - new beacon flasher
    - new colour changeable wireramps
    - new lightsaber models, and updated glow and lighting effects
    - new models for Death Star, R2-D2, Millenium Falcon
    - new updated R2-D2 hologram
    - trench run plungerlane model
    - new 3d docking bay window on the backwall with flyby space ships
    - new fully animated turbo laser cannon that track flyby ships and fires at them when the bumpers are hit (or the player presses buttons)
    - x-wing, tie fighter, vader tie fighter, y-wing ships that fly by
    - space battles that have x-wings / tie fighters / laser blasts / explosions flying all around the game
    - epic Death Star explosion effect!
    - animated characters for Darth Vader, Yoda, C3PO, Stormtroopers, Pilot Luke Skywalker, GNK Droid
    - VR room with spaceship hallway, planets, space, flying ships
    - Star Wars arcade game easter egg (behind the player)
    - BB-8 animated ball option (thanks Gimli)
    - new 128x32 FP DMD
    - new attract mode with Darth Vader's DISCO-RAMA with all characters dancing and animated colour changing spotlights... and new remastered Star Wars Disco theme music
    - new PinEvent V2 support for DOF, PUP SSF, PUP DMD, PUP Stream, etc
    - loads of other fixes, new details and other things I've lost track of...
     
     
    This all combined makes for the most explosive and visually stunning Star Wars table you've ever seen! Pure adrenaline!
     
    Thanks to SLAMT1LT for making such a great table to add all this to!
     
     
    The WIP thread for the table can be seen here:
     
    https://vpuniverse.com/forums/topic/7483-star-wars-death-star-assault-galactic-edition-the-most-amazing-star-wars-table-ever-made/#comment-64389
     
     
    ====================================================
     
     
    For a video preview of this table in action (before the FizX update) check out this video:
     
     
     
     
     
     
    To see a video that shows the evolution of this table from 2005 to 2022, and how I updated the table, watch this video:
     
     
     
     
     
    ====================================================
     
     
    Thanks of course to these awesome contributors:
     
    SLAMT1LT: original Ultimate Pro table
    TerryRed: GALACTIC EDITION table
    Matt Ellis: original Sci-Fi Classic table / layout
    Gimli: BB-8 ball and animation code
     
    Wild: original idea to add X-Wing and Death Star
    Schlabber34: insert jewel images
    FLEEP: mechanical sounds
    Fuzzel: original Vader Tie Fighter, X-Wing, Turbo Laser cannon models
    JLou - FizX and support
    ravarcade: BAM and support
    Nailbuster: Pinup Player, PUP DMD, PUP SSF
    Chris Leathley: Future Pinball
     
     
    ====================================================
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================
     
     
    ****** This table is a 4 player game ******
     
     
    Desktop Static Camera Views
     
    In TABLE OPTIONS in the table script, you can change to a different static view (integrated into the table)


    While in Attract mode, the following options can be changed:
     
    Left Flipper: change lightsaber colour Right Flipper: BB-8 ball, chrome ball Plunger button: wire ramp colours (blue / red, chrome / chrome, lightsaber colour / red) Special 1: change backglass art Special 2: toggle lightsabers on / off

    When the ball is in the plungerlane, the following will launch the ball:

    Plunger button, Left / Special 1 / Special 2


    During Gameplay, the following will fire the Turbo Laser Cannon (just for fun)

    Plunger button, Left / Special 1 / Special 2


    Second Stage Flippers
     
    this table supports second stage flippers for cabinet players with this setup this needs to be enabled in TABLE OPTIONS in the table script ensure that your Second Flippers are setup in FP Control Settings ensure that your Special 1 and Special 2 keys / buttons are NOT the same keys / buttons as Second Flippers! (they are by default)  
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST “first” disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
     
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
     
     

     

     
     

     

     

     
     

     
     

     

    12267 downloads

       (41 reviews)

    216 comments

    Updated

  13. Blade Runner - Replicant Edition (PinEvent Lite, FizX 3.3)

    Blade Runner - Replicant Edition (PinEvent Lite, FizX 3.3)

    Version 1.3 (Feb 2024)
     
    Original Ultimate Pro 1.04 table by: SLAMT1LT
    Replicant Edition, PinEvent Lite, FizX update by: TerryRed
     
     
    SLAMT1LT's original table captures the visuals, sounds and atmosphere of this sci-fi classic movie.
     
    I love Blade Runner, so I really wanted to add my own bit of flair to this amazing table. I've added my PinEvent Lite features for DOF, SSF, etc (PUP DMD is a future update).
     
    I've also overhauled this table and modernized it to my own preferences for lighting, shadows, FizX physics, new art, and more. I added some new features and added many fixes that prevented game progression, etc. This makes an already great game look / sound / play absolutely amazing. I love it!
     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     

     
     
     
    PinEvent Lite
     

     
    I've added my PinEvent Lite features for DOF, SSF, etc (PUP DMD is a future update).
     
    PinEvent Lite features for this table:
     
    DOF (basic config, no custom animated effects... yet) PUP (simple backglass and speaker grill options) PUP SSF Night Mode TILT BOB  
    NOTE: PinEvent Lite tables do NOT have PUP-Pack options that include support for PUPDMD / videos / modern text, etc. That will come at a later date, when the table is upgraded to PinEvent V2.
     
     
    DMDExt
     
    Cabinet users will need to use DMDExt to mirror the FP DMD to their DMD display / real DMD. Read the included Install Instructions for more info and links on how to do this.
     

     
     
     
    For an EPIC video preview of this table's updates and new features, and a gameplay demo of almost all modes, check out this video:
     
     
     
     
     
    Thanks of course to these awesome contributors:
     
    SLAMT1LT – original Ultimate Pro 1.04 table
    TerryRed – Replicant Edition, PinEvent, FizX updates
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - for FizX and support
    Everyone at Pinball Nirvanna for ideas, examples, and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================================
     

     

     

     

     

     
     
     
    ====================================================================
     
     
    This table is single player only.
     
     
    ====================================================================
     
     
    Desktop Static Camera Views
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Video Screen (apron option - cabinet only)
     
    you can chose to have the video screen displayed on the apron. This can be changed in the table script in TABLE OPTIONS  
    Action Buttons (digital plunger, special 1, special 2)
     
    all buttons/keys will act as an autoplunger during gameplay  
     
    ====================================================================
     
     
    TABLE OPTIONS
     

     
     
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?

    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
    Changelog
     
    Replicant Edition (PinEvent Lite - FizX - Table updates) by TerryRed
     
    1.3

    - updated FizX physics code (includes some fixes) and physics xml settings
    - removed flipper nudge commands that are no longer needed
    - updated table to reflect changes in new physics code and settings
     
    1.2
     
    - updated table for FizX physics v3.3 (much more efficient with CPU usage)
    - new Debug options that can be enabled / disabled
    - new Toggle_Static_Camera option (disables toggling the static view during attract mode with plunger button)
    - use_RayCast_Shadows can now completely disable ray cast shadows (no need to disable in the BAM menu after)
    - updated some lighting
     
    Note: this update requires the new BAM 1.5-373 (included with my latest FP and BAM Essentials AIO)
     
    1.1
     
    - table completely updated for FizX v3.2 physics
    - new Lighting settings in TABLE OPTIONS in the table script
    - small fixes
    - updated PuP-Pack

    1.0

    - completely updated entire table for FizX physics v3.0
    - added FizX Tweaker Tool and HUD DMD
    - added new rubbers, sling diverters, bumpers for FizX
    - removed old EM kickers in bumpers (no longer needed)
    - updated lighting (headlight spotlight) with Spinner (flying police car)
    - added easing to Spinner (flying police car) miniplayfield to give it smooth movement
    - various table changes needed to properly work with new physics
    - removed older smoke ball rolling code and commands (no need for vbs file)
    - added new static desktop camera options (can be toggled during attract, or set in script)
    - removed older mechanical sounds and triggers
    - replaced all mechanical sounds with FLEEP sounds
    - removed items / surfaces no longer being used (dark plastics, sound triggers, etc)
    - updated table for all PinEvent features (except for PUP DMD and PUP Stream)
    - added PUP SSF and DOF support (basic DOF for now)
    - added new Ball rolling code for FP sounds and PUP SSF (detects which is enabled and works with that)
    - updated lighting and post processing
    - added new shadowmaps to many GI bulbs and flashers and enabled ray cast shadows
    - added shadowmaps TGA directly to table (cache does not need to be created)
    - overhauled entire table for new lighting and shadows
    - extended spinner alarm time to around 12 secs (instead of 6 secs)
    - added option to specify Range Timer duration in TABLE OPTIONS
    - converted DMD and related code from 128x16 to 128x32
    - added new HUD frame for 128x32 DMD, added new Backglass art for 128x32 DMD
    - added new option to display video screen on the apron (cabinet / vr mode only)
    - moved GUN targets and drop targets up to give more room (to hard to hit with new correct flipper angles)
    - updated playfield and plastics art to accomodate GUN Target changes
    - added new insert jewel images and decals
    - various other fixes
     
    A huge amount of work overall...so I'm sure there's lots I've forgotten to include - TerryRed

    3111 downloads

       (7 reviews)

    23 comments

    Updated

  14. RoboCop - Dead or Alive Edition (PinEvent Lite, FizX 3.3)

    RoboCop - Dead or Alive Edition (PinEvent Lite, FizX 3.3)

    Version 1.3 (Feb 2024)
     
    Original table build by: ROM
    Ultimate Pro update by: SLAMT1LT
    Dead or Alive Edition, PinEvent Lite, FizX update by: TerryRed
     
     
    SLAMT1LT did a massive update to Rom's original build of this table years ago for his Ultimate Pro update which completely changes this to a new game. New gameplay / rules / code, new sounds / voices / music, new lighting effects, new videos and more.
     
    I love RoboCop, so I really wanted to add my own bit of flair to this amazing table. I've added my PinEvent Lite features for DOF, SSF, etc (PUP DMD is a future update).
     
    I've also overhauled this table and modernized it to my own preferences for lighting, shadows, FizX physics, new art, and more. I added some new features and added many fixes that prevented game progression, etc. This makes an already great game look / sound / play absolutely amazing. I love it!
     
     
     

     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     
    PinEvent Lite
     

     
     
    I've added my PinEvent Lite features for DOF, SSF, etc (PUP DMD is a future update).
     
    PinEvent Lite features for this table:
     
    DOF (basic config, no custom animated effects... yet) PUP (simple backglass and speaker grill options) PUP SSF Night Mode TILT BOB  
    NOTE: PinEvent Lite tables do NOT have PUP-Pack options that include support for PUPDMD / videos / modern text, etc. That will come at a later date, when the table is upgraded to PinEvent V2.
     
     
    DMDExt
     
    Cabinet users will need to use DMDExt to mirror the FP DMD to their DMD display / real DMD. Read the included Install Instructions for more info and links on how to do this.
     

     
     
     
     
     
    For an EPIC video preview of this table's updates and new features, and a gameplay demo of almost all modes, check out this video:
     
     
     
     
     
     
    Thanks of course to these awesome contributors:
     
    ROM – original table build
    SLAMT1LT – Ultimate Pro update
    TerryRed – Dead or Alive Edition, PinEvent, FizX updates
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - for FizX and support
    Everyone at Pinball Nirvanna for ideas, examples, and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================================
     
     

     
     

     
     

     
     

     
     

     
     

     
     

     
     
     
    ====================================================================
     
     
    This table is single player only.
     
     
    ====================================================================
     
     
    Desktop Static Camera Views
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Playfield Video Screen
     
    the playfield video screen will adjust for a better view in cabinet mode  
    Action Buttons (digital plunger, special 1, special 2)
     
    all buttons/keys will act as an autoplunger during gameplay  
     
    ====================================================================
     
     
    TABLE OPTIONS
     

     
     
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?

    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
    Changelog
     
    Dead or Alive Edition (PinEvent Lite - FizX - Table updates) by TerryRed
     
    1.3

    - updated FizX physics code (includes some fixes) and physics xml settings
    - removed flipper nudge commands that are no longer needed
    - updated table to reflect changes in new physics code and settings
     
    1.2
     
    - updated table for FizX physics v3.3 (much more efficient with CPU usage)
    - new Debug options that can be enabled / disabled
    - new Toggle_Static_Camera option (disables toggling the static view during attract mode with plunger button)
    - use_RayCast_Shadows can now completely disable ray cast shadows (no need to disable in the BAM menu after)
     
    Note: this table update requires the new BAM 1.5-373 update (included in my newest FP and BAM Essentials AIO)
     
    1.1
     
    - table completely updated for FizX v3.2 physics
    - new Lighting settings in TABLE OPTIONS in the table script
    - small fixes
    - updated PuP-Pack

    1.0

    - completely updated entire table for FizX physics v3.0
    - added FizX Tweaker Tool and HUD DMD
    - added new rubbers, sling diverters, bumpers for FizX
    - various table changes needed to properly work with new physics
    - removed older smoke ball rolling code and commands (no need for vbs file)
    - added new static desktop camera options (can be toggled during attract, or set in script)
    - removed older mechanical sounds and triggers
    - replaced all mechanical sounds with FLEEP sounds
    - removed items / surfaces no longer being used (dark plastics, sound triggers, etc)
    - updated table for all PinEvent features (except for PUP DMD and PUP Stream)
    - added PUP SSF and DOF support (basic DOF for now)
    - added new Ball rolling code for FP sounds and PUP SSF (detects which is enabled and works with that)
    - updated BAM lighting and post processing
    - added new shadowmaps to many GI bulbs and flashers and enabled ray cast shadows
    - added shadowmaps TGA directly to table (cache does not need to be created)
    - overhauled entire table for new lighting and shadows
    - added new beacon flashers that trigger during various events
    - added new BAM spotlight flashers and events for Robocop and ED209
    - added new bump mapped jewel images for all inserts
    - video screen will now move to an angle to be more visible (cabinet mode only)
    - updated spinner toys and code to use Wecoc's spinner code
    - updated / new art for plastics, sidewalls, backbox, apron, room wall, flippers
    - edited ramps to remove portions that interfered with proper ball flow
    - repositioned drop targets and standup targets for better ball flow and shots
    - various other updates and fixes
     
    A huge amount of work overall...so I'm sure there's lots I've forgotten to include - TerryRed

    3387 downloads

       (10 reviews)

    31 comments

    Updated

  15. Nightmare on Elm Street ULTIMATE 1.06 (Physics 2.7 DOFLinx)

    Nightmare on Elm Street ULTIMATE 1.06 by SLAMT1LT
    DOFLinx mod by senseless
    DOFLinx - "A powerful utility for cabinet owners to make the most of force feedback and lighting." - by DDH69
    This Future Pinball table has DOFLinx commands added to it. This will enable support for pinball cabinet force feedback devices such as solenoids (flippers,bumpers,slingshots,drop targets,etc), RGB lighting and flashers, beacon, strobes, blower fan, shaker and more!
    Cabinet Use: For cabinet users running DOFLinx: This table will function with the in-game sounds for mechanical devices such as flippers, slingshots, bumpers, etc muted.  Instead, you will only hear your cabinet's feedback devices for those actions. The rest of the game's sounds will play normally as intended by the table author.
    Desktop Use: For desktop users: This table will still function normally without the need for DOFLinx to be running or installed (read "Requirements / Installation"). It will play perfectly with the original in-game mechanical sounds playing through your PC's speakers. Note: Any DMDs or HudOverlays intended for desktop use were moved out of view so that they will not appear on the playfield (this was intended for DOFLinx cabinet use) .
    Night Mode: For cabinet users who want to play at night with their cabinet noise makers turned off, this table can be toggled between Cabinet Use (noisy), and Desktop Use (Night Mode). Please consult the DOFLinx guide (included with the DOFLinx install package) for more information on how to use Night Mode.
    Please read Requirements / Installation to setup DOFLinx.
    I hope you enjoy this DOFLinx cabinet experience!

    1430 downloads

       (1 review)

    3 comments

    Submitted

  16. JAWS - BIGGER BOAT EDITION (PinEvent V2, FizX 3.3)

    JAWS – BIGGER BOAT EDITION
     
     Original Table created by: ROM
     
    Ultimate Pro Update by: SLAMT1LT
     
    BIGGER BOAT EDITION by TerryRed
     
    Table version: 1.7 (Feb 2024)
     
    ======================================
     
     
    What began as ROM’s classic Jaws table for Future Pinball, has evolved over the years from SLAMT1LT’s massive Ultimate Pro update, to my new BIGGER BOAT EDITON.
     
    This table has been completely updated to use the newest modern BAM features to create an amazing real-time visual treat that will blow you away! Almost everything you see has been updated to the max and many cool additions have been added!
     
    See new effects, such as the ramp spilling the blood of any ball eaten by the shark. New animated bumpers fill with bloody water. Gasp as you see victims reach out from the bumpers for help! Witness Ben Gardner’s dead corpse bob up and down. New animated water plastics, boat wheel and orca toys, Hooper’s tanks, buoy flashers, underwater VR room and more!
     
     
    ======================================
     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
    PinEvent V2
     
    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     

     
    ======================================
     
     
    For a video walkthrough off all game modes and features, checkout this video:
     
     
     
    To see the evolution of this table from ROM’s original table, to SLAMT1LT’s Ultimate Pro update, then to this Bigger Boat Edition, watch this video:
     
     
     
    ======================================
     
     
    ******** CONTRIBUTORS TO THE CREATION OF THIS TABLE ********
     
    ROM: Jaws Pinball
     
    - created and designed the excellent original table
    - layout, script, code, gameplay, art, sounds, voice overs, music, models, animation
     
    SLAMT1LT: Jaws - Ultimate Pro update
     
    - many table updates from Ultimate Edition to Ultimate Pro
    - massive new updates to script, code, sounds, voice overs, music, lighting
    - many new additions to gameplay / modes, and new harpoon shooter
    - "FP" HUD and backglass videos, DMD
    - lots more stuff that went into making an awesome update
     
    TerryRed: Jaws - BIGGER BOAT EDITION 1.0 - Oct 2022
     
    - updates to the table, layout, code, sound, music, items, lighting, models, etc
    - removed older items / surfaces / lights no longer used
    - adjusted table geometry to allow for better ball flow
    - updated BAM lighting and post processing
    - updated entire table's G.I. and coloured lighting
    - updated playfield artwork (sand) and used original "clean" artwork
    - new insert models, lighting, textures, normal maps
    - new BAM spotlights
    - new artwork for plastics, apron, backbox, ramp, sidewalls, backwall
    - new shadowmaps for G.I and flashers (made to work properly with ray cast ball shadows)
    - new VR Room with animated water / caustics / detailed Orca model / shark model
    - new animated boat wheel models and lights for slingshots
    - new animated life saver bumpers models
    - new bloody civilian death animations (arm and head models that pop up from bumper)
    - new animated blood on Jaws ramp when ball is eaten
    - new animated "water" effects on platics and bumpers
    - new detailed Orca model and animation
    - new Hooper's oxygen tank models
    - new lights on the apron for harpoon and civilians
    - new JAWS plunger lane sign with flasher, and plunger lane sand art
    - new FLEEP mechanical sounds
    - updated entire table for FizX physics
    - PinEvent V2 support for DOF, SSF, PUP DMD, and PUP Stream
    - added TABLE OPTIONS to customize many things on startup, and for performance, etc.
    - a huge amount of work and lots of other updates and details I can't keep track of
     
    Other contributors to this table:
     
    Schlabber34: insert jewel images
    FLEEP: mechanical sounds
    JLou: FizX and support
    ravarcade: BAM and support
    Nailbuster: Pinup Player, PUP DMD, PUP SSF
    Chris Leathley: Future Pinball
     
     
    ======================================
     
     
    ****** This table is a 3 player game ******
     
     
    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script

    During Gameplay, the following will fire the Harpoon Ball Launcher and act as a plunger
     
    Plunger button, Special 1 button, Special 2 button  
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
     
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
     

     

     

     

     

     

     

     

     
     
     
     

    9473 downloads

       (23 reviews)

    105 comments

    Updated

  17. Medieval Castle (Original) (FizX 3.3)

    Note: I was unable to reduce the file size of this download to less than 47 MB so I posted it at the following site:
     
    https://www.mediafire.com/file/orlkhln2kqqsi5a/Medieval+Castle+1.1.7z/file
     
    This table is a little-known gem.  I know that some of you avoid original tables like the plague but Roney Pinball created something here that is really special.  This is one of the first tables I found when I first started playing Future Pinball more years ago that I care to mention.  I played it for many hours.  Everything about it just feels right for medieval knights and castles.  It is very immersive and transports you to a bygone era of chivalry, castles, and epic battles.  The sound effects are particularly good.  The dynamic soundtrack includes the sounds of swords clashing, horses galloping, and dungeon echoes.  When I replayed it before creating this modification, I could not hear the flipper sounds because they were overpowered by other sounds so I knew I had my work cut out for me. 
     
    Note: Be sure you read the "Must Read" sections below and all the text in bold print. 
     
    The following video demonstrates the unique features of Medieval Castle and has a short bit of game play:
     
     
    BAM – Must Read
     
    This table requires BAM version 1.5-373 or later for it to perform as intended and to not crash or generate error messages.  This version was released on 1/28/24 and you must have it installed for FizX 3.3 to work.  You can download it here:
     
    https://www.ravarcade.pl/download
     
    Zip File – Must Read
     
    There is a zip file included in the download.  It contains the model of a ball with 1K polygons.  Do not unzip the zip file.  Just save it with the same name as the table and place it in the same folder as the table.  If you don't use it, the physics won't be correct.  Some end users have added the zip file to their BAM folder so it works on all tables.  If you have done this, you can delete the zip file in the download.
     
    DOF and PUP SSF
     
    I decided to add PinMechSound which is a first for me.  If you are not aware of what it is, it is a way for pinball cabinet users to add DOF and surround sound feedback (SSF) to their cabinets.  I think there is a way to add it to a desktop but I don't think it produces much benefit for my setup.  Debo26 was nice enough to test this table on his cabinet.  To make SSF work, you must add the PUP-Pack that is included in the download.  Copy "FP_PUP_SSF_GEORGE" to your PUPVideos folder.
     
    Just adding PinMechSound wasn't enough for the sound, however.  The sound was not balanced so I added what I call a "Sound Level Control Panel" where I balanced each of the 6 groups of all sounds used on the table and then balanced the 6 groups together so they sounded right.  You can adjust the 6 groups in the script yourself if you wish but I think I got it right. 
     
    FizX and Tweaker
     
    I added FizX 3.3 with the latest version of the FizX menu system that we call a "tweaker".  Press the Special 1 key to open the FizX tweaker and read the directions on the overlay that appears on your screen for navigating the system.  I moved the options on the tweaker so the parameters I use the most are displayed first on the list with the lesser-used parameters at the bottom.  If you are not familiar with FizX, you might find the parameters on the tweaker intimidating.  You will however be able to understand the option for "Bounce Choices" which is the very first option.  The option refers to the bounce of the ball off the flippers.  The "Bounce Choices" option allows you to make selections that anyone can understand.  For example, you can select "Low Bounce" or "Medium Bounce".  I recommend you try making changes to this option.  I have already made adjustments on the tweaker but everyone knows I like the flippers to have a very low bounce.  From what I have seen, most folks prefer higher bounce.
     
    Lighting
     
    I added lighting modes for Day, Dusk, Night, Dark Night, and FP Original.  I went a bit further than I usually do by adjusting over 50 parameters for each lighting mode that you can see near the beginning of the script.  Press the Special 2 key to toggle through the lighting modes.  FP Original doesn't look quite as good as the other lighting modes but it helps those that have lower-end PCs. 
     
    Camera Views
     
    This table has a large segmented display on the backbox that cannot be seen with the popular "Full Table 2" view.  If you can't see the display, you can't play the game very effectively.  I created three camera view profiles that show the segmented display.  I set one of them, to be the default in the script so the segmented display should be visible when you first play the table.  You can change the default camera view by pressing the "V" key repeatedly to toggle through the three options.   
     
    Plunger Modification
     
    Popotte developed a plunger mod that added a new feature to the code I had been using.  The code that I used in the past makes the plunger pull back more slowly, making it easier to hone in on just the right power to hit certain skill shots on most tables.  This table does not have a skill shot but it does have a hidden kicker in the back of the castle where this modification makes it easier to hit. 
     
    The plunger that Popotte created has two modes of operation.  The slow plunger pullback is the same as previous versions I used and works like a normal plunger would by pressing the plunger key.  The second method is where you can use the up and down arrow keys to position the plunger exactly before it is released.  Then you press the plunger key to release the ball.  Popotte had been using this mod for a long time but it required setting a switch to either use the slow pullback or the arrow keys.  He and I worked together to figure out a way to code it so it does not require a switch.  ...So you can either press the plunger key and release it at the point where you want it to let go or you can very precisely adjust the plunger with the up and down arrow keys and then press the plunger key to let go of the plunger.  
     
    Easy Game Play
     
    There is an option in the script for easy gameplay.  The option is set to false by default.  You can change it to true if you want easier gameplay.  The comments in the script identify all the changes it makes. 
     
    Rules
     
    I wrote a set of rules that I added to the instruction cards on the apron.  I had written rules which included what happens when the kicker is hit that is inside the castle on the left side.  Then I decided that Roney Pinball might have wanted this to be unknown to the end user because he calls it a "Mystery" in the game.  I decided to add that content exclusively to a PDF file that is in the download.  The content of the PDF is identical to the rules added to the instruction cards except for what happens inside the castle.  If you want the castle rules to remain a "Mystery", you should delete the PDF file. 
     
    The Spinner
     
    I had some trouble with the spinner on this table from the start.  It would only spin once or twice when it was hit and would stop.  I tried adding some code that Ravarcade created but it didn't perform any better.  Wecoc developed a method where the spinner object on the table is converted to a toy with some special code that operates it.  It makes the spinner on this table work perfectly.  It also helps your score quite a bit when you complete the mode that adds 1000 points to your score for each spin. 
     
    Table Loading Screen
     
    There are two table-loading textures as listed below.  The first landscape texture is the default and is intended to be used on desktop PCs.  The portrait texture is intended to be used on pinball cabinets and is used on the "rotated display" version of the table described below. 
     
    LoadingLandscape.jpg
    LoadingPortrait.jpg
     
    Rotated Display
     
    Finally, I added a version of the table for those of us who have desktop PCs with a single monitor that can swivel so it is oriented in an upright position.  I call it a rotated display.  To play the table, you need to change the "Rotation" option to 270 degrees on the "Preferences" > "Video / Rendering Options" screen of the FP editor.  You can try it on a standard monitor to see what it looks like but it will be oriented sideways.  The popular Full Table 2 view only uses about 50% of the screen for the playfield whereas this option uses about 90% of the screen.  It produces a more immersive gaming experience. 
     
    Conclusion
     
    I hope you give this table a chance.  It is truly one of the best original tables.  You would think the castle uses a model but it uses 80+ Future Pinball standard walls and surfaces.  It must have taken Roney Pinball some time to create.  I added everything I could think of to improve the gameplay of this table.  I hope you like it. 
     
    Table Developers
     
    Roney Pinball
    GeorgeH
     
    Contributions by:
    Gimli – Codeveloper of the FizX Tweaker
    JLou5641 - Creator of FizX
    Fleep - Created recordings for mechanical sounds
    TerryRed – developed the "All in One" template of FizX
    Popotte - Developer of the plunger modification
    Wecoc - Developer of the spinner
    Debo26 – Tester of DOF and PUP SSF on this table
     
    List of Changes:
     
    1) Upscaled most of the textures on the table except for the castle.
    2) Made the castle textures darker.
    3) The segmented display was not visible on the Full Table 2 view so 3 switchable camera views were added which can be changed by pressing the letter "V" repeatedly.
    4) Added model for game room with texture.
    5) Added new rock texture to the ramp and new shingle texture for the castle roof.
    6) Added Hud toggle key that saves setting to fpRam.
    7) Added plunger pull special script to slow down pull-back, making it easier to hone in on a shot to the hidden kicker.  
    😎 Added a ball stop surface above the ramp to keep the ball from flying and added an invisible approach ramp.
    9) Fixed bug that displays M1Count not defined. 
    10) Added more time to display the text on the segmented display on the backwall so you have time to read it. 
    11) Moved the lens for the "Jackpot 100,000" light on the playfield texture up higher on the playfield so the light for it could be moved so it does not cover the text.
    12) Added Fleep recordings for mechanical sounds. 
    13) Aligned the left wall of the table that has a break in it and made the ball bounce to the right.  
    14) Adjusted the color of all the light inserts on the playfield.
    15) Changed the displays on the long segmented display 1) to include baseline point values (without bonuses) 2) added displays for when the hidden kicker is hit 3) made displays last longer so you have time to read them.
    16) Added custom flipper texture.
    17) Added black side rail caps and lock down bar.
    18) Added BAM code that allows the score to exceed 2 billion points and made some code changes to support it.
    19) After upscaling the lenses for the 2x to 6x bonus multiplier lights, the text was centered, and the background lightened to make the numbers more prominent.
    20) When all lights were illuminated on the 2-bank stationary targets and the 3-bank drop targets they never displayed long enough to see it.  Added more time to allow end users to see the light before turning off.
    21) There were 2 extra ball lights on the playfield where the coding was never finished.  Added extra ball awards completing the sequences for 2-bank stationary targets and the 3-bank drop targets (see the rules). 
    22) Fixed the display so it does not say multiball when no prisoner lights are lit and only the original ball returned.
    23) Wrote rule sheet and added it to instruction cards on the apron and included a PDF in the download with the rules. 
    24) Added portrait loading texture for cabinet users. 
    25) Added a new feature by Popotte to the plunger mod.  You can now use the up and down arrow keys to position the plunger exactly where you want then press the plunger key to let go of the plunger.  If you don't want to use the arrow keys, press and hold the plunger key.
    26) Added Sound Level Control Panel that adjusts every sound used on the table. 
    27) Added music to the attract mode. 
    28) Added Pin Mech Sound. 
    29) Changed 3 modes that could only be completed one time so they can be repeated.
    30) Corrected a problem with the trigger below the left gate in the middle of the table.  This trigger did not consistently turn on the green lights in front of the ramp in the correct sequence.  This was fixed. 
    31) Created a version of the table for Rotated Display for those that have single monitor PCs and can tilt their monitor 90 degrees.

    367 downloads

       (2 reviews)

    8 comments

    Updated

  18. Aliens Legacy - "Game Over, Man" (PinEvent Lite, FizX 3.3)

    Aliens Legacy - "Game Over, Man" (PinEvent Lite, FizX 3.3)

    Version 1.3 (Feb 2024)
     
    Original table design and concept by: David Eisner
    Ultimate Pro 1.03 table by: SLAMT1LT
    Game Over Man, PinEvent Lite, FizX update by: TerryRed
     
     
    Aliens Legacy Pinball started long ago around 2010 as an original design by David Eisner, then later updated by Destruk, Pinballwzd, Steve Paradis and Tom Niwinski.
     
    After that, the table was updated many times by SLAMT1LT (ULTRA, HARDCORE, Ultimate / Bad Ass, etc). Years later, he updated the table with a massive awesome update for his Ultimate Pro version. It has become one of my favorite all time tables.
     
    BAM has had many new updates and new features added since the Ultimate Pro table was released years ago. I love the Alien movies, so I really wanted to add my own bit of flair to this amazing table.
     
    I've added my PinEvent Lite features and overhauled this table and modernized it to my own preferences for lighting, shadows, FizX physics, and more. I added some new features, new models, new changes, and more. This makes an already great game look / sound / play absolutely amazing. I love it!
     
     
     

     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     
     
    PinEvent Lite
     

     
     
     
    I've added my PinEvent Lite features for DOF, SSF, etc (PUP DMD is a future update).
     
    PinEvent Lite features for this table: DOF (basic config, no custom animated effects... yet) PUP (simple backglass and speaker grill options) PUP SSF Night Mode TILT BOB  
    NOTE: PinEvent Lite tables do NOT have PUP-Pack options that include support for PUPDMD / videos / modern text, etc. That will come at a later date, when the table is upgraded to PinEvent V2.
     
     
     
    DMDExt
     
    Cabinet users will need to use DMDExt to mirror the FP DMD to their DMD display / real DMD. Read the included Install Instructions for more info and links on how to do this.
     

     
     
     
     
    For an EPIC video preview of this table's updates and new features, and a gameplay demo of almost all modes, check out this video:
     
     
     
     
     
     
     
    Thanks of course to these awesome contributors:
     
    David Eisner : original build, additional audio design (Mother voice)
    SLAMT1LT : Ultimate Pro 1.03 table update, coding, artwork, audio design, videos, VFX, Motion Tracker animation
    Steve Paradis : Alien creature and NOSTROMO models
    Wild : Sentry Gun toy
    TerryRed : "Game Over Man" update, PinEvent Lite, FizX, coding, lighting, shadows, art, models, table updates
     
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - for FizX and support
    Everyone at Pinball Nirvanna for ideas, examples, and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    ====================================================================
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================================
     
     

     

     

     

     

     

     

     

     

     

     

     

     
     
     
    ====================================================================
     
     
    This table is single player only.
     
     
    ====================================================================
     
     
    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Action Buttons - digital plunger, special 1, special 2 (gameplay)
     
    all buttons/keys will act as an autoplunger and an action button during gameplay  
    Change G.I. colours (attract mode)
     
    special 1 / 2 buttons will toggle the G.I. colours during attract mode  
    Video Screen (apron option – cabinet or vr only)
     
    the video screen can be displayed on the apron. This can be changed in the table script in TABLE OPTIONS  
     
    ====================================================================
     
     
    TABLE OPTIONS
     

     
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM  

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!

    ====================================================================
     
     
    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
    Changelog
     
    **** Game Over, Man - PinEvent Lite - FizX - Table updates - by TerryRed ****
     
    v1.3
     
    - updated FizX physics code (includes some fixes) and physics xml settings
    - removed flipper nudge commands that are no longer needed
    - updated table to reflect changes in new physics code and settings
     
    v1.2
     
    - updated table for FizX physics v3.3 (much more efficient with CPU usage)
    - new Debug options that can be enabled / disabled
    - new Toggle_Static_Camera option (disables toggling the static view during attract mode with plunger button)
    - use_RayCast_Shadows can now completely disable ray cast shadows (no need to disable in the BAM menu after)
     
    V 1.1
     
    - table completely updated for FizX v3.2 physics
    - new Lighting settings in TABLE OPTIONS in the table script
    - small fixes
    - updated PuP-Pack
     
    v1.0
     
    - completely updated entire table for FizX physics v3.0
    - added FizX Tweaker Tool and HUD DMD
    - added new rubbers, sling diverters, bumpers for FizX
    - various table changes needed to properly work with new physics
    - removed older smoke ball rolling code and commands (no need for vbs file)
    - removed older mechanical sounds and triggers
    - replaced all mechanical sounds with FLEEP sounds
    - removed items / surfaces no longer being used (dark plastics, sound triggers, etc)
    - added new static desktop camera options (can be toggled during attract, or set in script)
    - updated table for all PinEvent features (except for PUP DMD and PUP Stream)
    - added PUP SSF and DOF support (basic DOF for now)
    - added new Ball rolling code for FP sounds and PUP SSF (detects which is enabled and works with that)
    - updated lighting and post processing
    - added new shadowmaps to many GI bulbs and flashers and enabled ray cast shadows
    - added shadowmaps TGA directly to table (cache does not need to be created)
    - overhauled entire table for new lighting and shadows
    - added new beacon flasher that triggers during various events
    - converted DMD and related code from 128x16 to 128x32
    - added new option to display video screen on the apron (cabinet / vr mode only)
    - updated spinner toy and code to use Wecoc's spinner code
    - added new bump mapped jewel images for arrow inserts
    - updated plastics art
    - added new Backglass art and grill for 128x32 DMD
    - new apron layout, new apron art, new launch and action lights on the apron
    - new animated Ripley model
    - new table models (bumper eggs, motion tracker, rifle, face hugger)
    - new gameroom models (face hugger topper, alien, alien queen)
    - positioned motion tracker hologram on new motion tracker model
    - new animated explosion effect for when ship explodes
    - new options for second stage flippers
    - new options for changing G.I. colours
    - new options for changing the FP DMD colours
    - various other updates and fixes
     
    A huge amount of work overall...so I'm sure there's lots I've forgotten to include - TerryRed
     
     
     

    4197 downloads

       (6 reviews)

    77 comments

    Updated

  19. F-14 Tomcat - Afterburner (PinEvent V2, FizX 3.3)

    F-14 Tomcat - Afterburner (PinEvent V2, FizX)
     
    Version: 1.9 (Feb 2024)
     
    This is SLAMT1LT’s F-14 Tomcat (Ultimate Pro 1.01) table which has been updated to my AFTERBURNER and PinEvent V2 mod. It has been completely updated to use the newest BAM features to create an amazing real-time visual treat with cool new additions, as well as excellent new mechanical sounds from FLEEP!
     
    See new features such as real beacon lighting, new mesh inserts with animated RGB lighting effects, new shadowmaps, ray cast shadows, updated playfield art, and more. I’ve added options to change between Modern / Original / AfterBurner music and Modern or Arcade (AfterBurner) PUP-Pack displays at any time during gameplay!
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     

     
     
     
    PinEvent V2
     
    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     

     
    For a video walkthrough of the updates, new features, and all game modes, watch here:
     
     
     
    Screenshots:
     

     

     

     

     
     
    Thanks of course to these awesome contributors:
     
    SLAMT1LT and Chaos: table build
    SLAMT1LT: Ultimate Pro 1.01 update
    TerryRed: AFTERBURNER table update, PinEvent V2, FizX
    Puma: topperlight
    JPSalas: apron image
    wtiger + ian: plastics source
    ganjafarmer: new 4K playfield redraw image
     
    Schlabber34: insert jewel images
    FLEEP: mechanical sounds
    JLou: FizX and support
    ravarcade: BAM and support
    Nailbuster: Pinup Player, PUP DMD, PUP SSF
    Chris Leathley: Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
    ====================================================================
     
    This table is 4 player
     
    ====================================================================
     
     
    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Action Buttons - digital plunger, special 1, special 2 (gameplay)
     
    all buttons/keys will act as an autoplunger and an action button during gameplay
     
    Special 1 or Special 2 key will toggle between Music / Video modes at any time
     
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS  

    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     

    7591 downloads

       (15 reviews)

    55 comments

    Updated

  20. Indiana Jones - Fortune and Glory Edition (PinEvent Lite, FizX 3.3)

    Indiana Jones - Fortune and Glory Edition (PinEvent Lite, FizX 3.3)
     
    Version 1.3 (Feb 2024)
     
    Original wip table build by: GLXB & Highlnder00
    Ultimate Pro update by: SLAMT1LT
    Fortune and Glory Edition, PinEvent Lite, FizX update by: TerryRed
     
     
    Do not make the mistake in thinking this is the same as the Stern table. The layout and art are where the similarities end. SLAMT1LT did a massive update to the older WIP build of this table years ago for his Ultimate Pro update which completely changes this to a new game. New gameplay / rules / code, new sounds / voices / music, new lighting effects, new videos, new freeshots / action button and more.
     
    I've never played the original (real) Stern table (only the VP version). Once I played the FP Ultimate Pro table, I was blown away, and it has become one of my favorite all time tables. BAM has had many new updates and new features added since the original Ultimate Pro table was released years ago. I'm a big Indy fan, so I really wanted to add my own bit of flair to this amazing table.
     
    I've also overhauled this table and modernized it to my own preferences for lighting, shadows, FizX physics, and more. I added some new features and many fixes that prevented game progression, etc. This table takes full advantage of BAM's latest features with full dynamic lighting and ray cast shadows and shadowmaps to create a stunning visual pinball showcase! Top that off with all new FLEEP mechanical sounds! This makes an already great game look / sound / play absolutely amazing. I love it!
     
     
     

     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     
    PinEvent Lite
     

     
    I've added my PinEvent Lite features for DOF, SSF, etc.
     
    PinEvent Lite features for this table:
     
    DOF (basic config, no custom animated effects... yet) PUP (simple backglass and speaker grill options) PUP SSF Night Mode TILT BOB  
    NOTE: PinEvent Lite tables do NOT have PUP-Pack options that include support for PUPDMD / videos / modern text, etc. That will come at a later date, when the table is upgraded to PinEvent V2.
     
     
    DMDExt
     
    Cabinet users will need to use DMDExt to mirror the FP DMD to their DMD display / real DMD. Read the included Install Instructions for more info and links on how to do this.
     

     
     
     
     
    For an EPIC video preview of this table's updates and new features, and a gameplay demo of almost all modes, check out this video
     
     
     
     
    Thanks of course to these awesome contributors:
     
    GLXB & Highlnder00 – original wip table build
    SLAMT1LT – Ultimate Pro update
    TerryRed – Fortune and Glory, PinEvent, FizX updates
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - for FizX and support
    Everyone at Pinball Nirvanna for ideas, examples, and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     

     
     

     
     

     
     
     
    ====================================================================
     
     
    This table is single player only.
     
     
    ====================================================================
     
     
    Desktop Static Camera Views
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Playfield Video Screen
     
    during attract mode, left flipper will toggle the position if the playfield video screen  
    Indy animated model
     
    you can have an animated Indy character on the playfield, in the game room, or not at all this can be set in TABLE OPTIONS near the top of the table script  
    Action Buttons (digital plunger, special 1, special 2)
     
    all buttons/keys will act as an autoplunger during gameplay all buttons/keys will act as activate ACTION or FREESHOT when they are lit  
     
    ====================================================================
     
     
    ACTION and FREESHOT
     
    On the apron you will see lights for Action and Freeshot. These indicate when you can use these functions. They are activated with plunger, special 1, special 2 buttons.
     
    Action
     
    green = launch ball red = shoot the swordsman yellow = toggle next active scene  
    Freeshot
     
    a Freeshot can be used when you are in a mode and want to instantly make the lit shot the Freeshot light will light up orange when you are allowed to make a Freeshot you get an additional Freeshot on each new ball Freeshots can be stacked up if you don’t use them not all lit shots are allowed for a Freeshot there are other times when you are NOT allowed to make a Freeshot (you’ll hear a buzz if you try) such as when a ball is held, a ball is in a kicker, a mode starts, during some video sequences, etc.  

     
     
     
    TABLE OPTIONS
     
     

     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?

    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================
     

    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     
    Changelog
     
    Fortune and Glory Edition (PinEvent Lite - FizX - Table updates) by TerryRed
     
    1.3

    - updated FizX physics code (includes some fixes) and physics xml settings
    - removed flipper nudge commands that are no longer needed
    - updated table to reflect changes in new physics code and settings
     
    1.2
     
    - updated table for FizX physics v3.3 (much more efficient with CPU usage)
    - new Debug options that can be enabled / disabled
    - new Toggle_Static_Camera option (disables toggling the static view during attract mode with plunger button)
    - use_RayCast_Shadows can now completely disable ray cast shadows (no need to disable in the BAM menu after)
     
    Note: this table update requires the new BAM 1.5-373 update (included in my FP and BAM Essentials AIO)
     
    1.1
     
    - table completely updated for FizX v3.2 physics
    - new Lighting settings in TABLE OPTIONS in the table script
    - small fixes
    - updated PuP-Pack
     
    1.0
     
    - completely updated entire table for FizX physics v3.0
    - added FizX Tweaker Tool and HUD DMD
    - various table changes needed to properly work with new physics
    - added new rubbers, sling diverters, bumpers for FizX
    - removed old EM kickers in bumpers (no longer needed)
    - removed older smoke ball rolling code and commands (no need for vbs file)
    - removed older mechanical sounds and triggers
    - replaced all mechanical sounds with FLEEP sounds
    - removed items / surfaces no longer being used (dark plastics, sound triggers, etc)
    - updated table for all PinEvent features (except for PUP DMD and PUP Stream)
    - added PUP SSF and DOF support (basic DOF for now)
    - added new Ball rolling code for FP sounds and PUP SSF (detects which is enabled and works with that)
    - updated lighing and post processing
    - added new shadowmaps to many GI bulbs and flashers and enabled ray cast shadows
    - added shadowmaps TGA directly to table (no cache needs to be created)
    - overhauled entire table for new lighting and shadows
    - replaced some flasher bulbs with real flashers
    - changed spotlights to real BAM spotlights
    - updated spinner toys to use Wecoc's spinner toy code and one trigger
    - added new static desktop camera options (can be toggled during attract, or set in script)
    - added new apron art, lights, ring models for ACTION and FREESHOT functions
    - added fixes to update "time left" in realtime on the DMD
    - completely overhauled rules and code for FREESHOT
    - new freeshot rule: you get additional FREESHOT on each new ball
    - new freeshot rule: you can use more than one freeshot during a scene (but not for every lit shot)
    - new freeshot rule: you can choose how much Thrust Boost you get during Crystal Skull Scene 1 if using a Freeshot
    - freeshot / action / autoplunger can all be controlled with plunger / special 1 / special 2 buttons
    - added option to change location of video screen (backwall, backramp, apron - can be toggled during attract, or set in script)
    - fixed bugs that prevented progression when all scenes were lit for any movie
    - new light insert images, and new decal cut outs (overlay layer)
    - new Indy animated model with options to show him on the playfield, in the room, or not at all
    - various other fixes and updates
     
    A huge amount of work overall...so I'm sure there's lots I've forgotten to include - TerryRed

    4200 downloads

       (15 reviews)

    97 comments

    Updated

  21. Blue vs Pink - BAM Edition (PinEvent V2 - FizX 3.3)

    Blue vs Pink - BAM Edition (PinEvent V2 - FizX 3.3)
     
    Original Table by Brendan Bailey, 2009
     
    BAM Edition, PinEvent V2, and FizX mod by TerryRed, 2022
     
    Table version: 2.1 - BAM Edition (PinEvent V2, FizX 3.3) (Feb 2024)
     
    Thank you so much Brendan Bailey for supporting this update!
     
     
    ====================================================================
     
     
    Brendan Bailey is one of FP's classic "original" table authors. EVERYTHING on this table was made by him! The layout, art, music, sounds, code. Such an amazing work of passion deserves to be updated to be enjoyed by a new generation of virtual pinball lovers!

    I wanted to update to a classic FP "original" table to bring it up to my own modern day BAM standards, add my PinEvent V2 features, and completely update the table with FizX physics. The result is an excellent table that plays great with modern dynamic lighting, shadowmaps, ray cast shadows, and full cabinet support.
     
     
    ====================================================================
     
     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
    PinEvent V2

    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     

     
     
    ====================================================================
     
     
    For a video preview of the new BAM update comparison, go here:
     
     
     
     
    ====================================================================
     
     
    Original Table by Brendan Bailey:
     
    - table
    - art
    - animation
    - music
    - sounds
    - script
     
    TerryRed's BAM Edition update:
     
    - updated entire table for FizX physics
    - added PinEvent V2 support for DOF, PUP SSF, PUP DMD, PUPStream, and a new pup-pack
    - new G.I. lighting (dynamic lighting - x4 hidden flashers in lower and upper plastics)
    - added drain flasher for accented lighting
    - new options for changing G.I lighting colours (dynamic lighting only)
    - new BAM post processing
    - added shadowmaps to most lights
    - added pre-baked shadowmaps (created by BAM) to playfield and plastics texture
    - adjusted playfield / plastics / apron, etc texture brightness to better match new lighting
    - new 3D model inserts
    - new pre-rendered insert textures
    - new bump maps for inserts
    - disabled glow radius for all inserts
    - adjusted brightness of all playfield video textures (what a pain!) to better match new lighting
    - added sphere maps to the sides of all plastics
    - added new GI on/off code
    - adjusted GI on/off brightness for all lights / inserts / playfield videos
    - added all new FLEEP sounds for all mechanical actions (flippers, bumpers, slings, drain, etc)
    - updated entire table for FizX physics
    - added playfield blocker surface to prevent ball from jumping on plastics
     
    Thanks of course to these awesome contributors:
     
    Brendan Bailey (PinWizKid) - created the original Blue vs Pink table in 2009
    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds All the FP lads at Pinball Nirvanna for ideas, examples, and support
    JLou - FizX and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball
     
     
    DISCLAIMER:
     
    This table is an "original" creation, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
     
    ====================================================================
     
     
    *** This table is single player only ***
     
     
    ====================================================================
     
     
    Desktop Static Camera Views
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    G.I. colour and Brightness
     
    Special key / button 1 = change G.I. colours Special key / button 2 = change G.I. brightness  
    Second Stage Flippers
     
    this table supports second stage flippers for cabinet players with this setup this needs to be enabled in TABLE OPTIONS in the table script ensure that your Second Flippers are setup in FP Control Settings ensure that your Special 1 and Special 2 keys / buttons are NOT the same keys / buttons as Second Flippers! (they are by default)  
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST “first” disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================
     
     

    5832 downloads

       (6 reviews)

    33 comments

    Updated

  22. Junkyard Cats - BAM Edition (PinEvent V2 - FizX 3.3)

    Junkyard Cats - BAM Edition
     
    Original Table by Brendan Bailey, 2012
     
    BAM Edition, PinEvent V2, FizX mod by TerryRed
     
    Version 2.1, Feb 2024
     
    Thank you so much Brendan Bailey for supporting this update!
     
     
    ====================================================================
     
     
    Brendan Bailey is one of FP's classic "original" table authors. EVERYTHING on this table was made by him! The layout, art, music, sounds, code. Such an amazing work of passion deserves to be updated to be enjoyed by a new generation of virtual pinball lovers!

    I wanted to update to a classic FP "original" table to bring it up to my own modern day BAM standards, add my PinEvent V2 features, and completely update the table with FizX physics. The result is an excellent table that plays great with modern dynamic lighting, shadowmaps, ray cast shadows, and full cabinet support.


    ====================================================================

     
    This table has been fully updated with FizX physics for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy physics on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     
     

     
     
    ====================================================================
     
     
    PinEvent V2

    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     

     
     
     
     
    For a video preview (before adding FizX) of the PinEvent V2 update that showcases the DOF cabinet lighting and the modern PUP DMD display, go here:
     
     
     
     
     
    For a video preview of the new BAM update (before adding FizX), go here:
     
     
     
     
    ======================================


    Original Table by Brendan Bailey:

    - table
    - art
    - animation
    - music
    - sounds
    - script

    TerryRed's BAM Edition update:
     
    - updated entire table for FizX physics
    - added PinEvent V2 support for DOF, PUP SSF, PUP DMD, PUP Stream and new PuP-Pack
    - added ball rolling sounds
    - added nano kicker to left ramp scoop to make shots easier (was way too hard without it)
    - made various adjustments to table geometry and layout to make it play easier
    - added additional ramp blocker surfaces to prevent ball from flying off ramps / scoops
    - added new 4K playfield, plastics, backbox textures created from Brendan's original files
    - new G.I. lighting (dynamic lighting - x4 hidden flashers in lower and upper plastics)
    - new drain flasher for accented colour
    - new BAM post processing
    - added shadowmaps to most G.I lights
    - added pre-baked shadowmaps (created by BAM) to playfield and plastics textures
    - added illuminated look to GI ON plastics texture
    - adjusted playfield / plastics / apron, etc texture brightness to better match new lighting
    - new 3D model inserts
    - new pre-rendered insert textures
    - new bump maps for inserts
    - disabled glow radius for all inserts
    - added sphere maps to the sides of all plastics
    - updated GI on/off code
    - adjusted GI on/off brightness for all lights / inserts / textures
    - added all new FLEEP sounds for all mechanical actions (flippers, bumpers, slings, drain, etc)
    - added BAM DF1 physics (updated settings in editor to better work with new physics)
    - added invisible ramp blocker to prevent ball from flying off the ramp
    - added invisible playfield blocker to prevent ball from flying on top of plastics
    - hid slingshot bulbs that interfered with shadowmaps

    Additional Contributors:

    Schlabber34 - new pre-rendered insert images
    FLEEP - new mechanical sounds
    JLou - FizX and support
    Nailbuster - Pinup Player and SSF support
    Ravarcade - for creating the awesome BAM and providing assistance with BAM features
    Chris Leathley - creator of Future Pinball


    ====================================================================


    *** This table is single player only ***


    ====================================================================
     

    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    Action Buttons - digital plunger, special 1, special 2 (gameplay)
     
    all buttons/keys will act as an autoplunger and an action button during gameplay  
    Second Stage Flippers
     
    this table supports second stage flippers for cabinet players with this setup this needs to be enabled in TABLE OPTIONS in the table script ensure that your Second Flippers are setup in FP Control Settings ensure that your Special 1 and Special 2 keys / buttons are NOT the same keys / buttons as Second Flippers! (they are by default)  
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================

    7274 downloads

       (3 reviews)

    58 comments

    Updated

  23. Halloween - Big Bloody Mike (PinEvent V2, FizX 3.3)

    Halloween - Big Bloody Mike (PinEvent V2, FizX)
     
    Version: 2.0 (Feb 2024)
     
    This is SLAMT1LT’s Halloween (Ultimate Pro) table which has been updated to my Big Bloody Mike mod. It has been completely updated to use the newest BAM features to create an amazing real-time visual treat with many cool new additions, as well as excellent new mechanical sounds from FLEEP!
     
    See new effects, such as blood spilling down the playfield during Score Drain, animated spotlights, flashlight ball, pumpkin ball, and animated Michael Myers character which will stalk you on the playfield and in the VR Game Room.
     
     
    This table has been fully updated with FizX for game changing new physics on Future Pinball. FizX uses techniques similar to nFozzy on VPX to completely change the physics for the flippers, slings, rubbers, targets, ball behavior and more that allows this table play much more realistically than anyone ever thought was possible on Future Pinball. You will be amazed at the difference!
     

     
     
     
    PinEvent V2
     

     
    This table is also updated to fully support PinEvent V2 features (DOF, PUP SSF, PUP DMD). It has modern PUP DMD display options that can work with all setups. With it's crisp HD text and dazzling videos, it's sure to wow everyone who sees it.
     
    For a video walkthrough of the updates, new features, and all game modes, watch here:
     
     
     
     
    Screenshots:
     

     

     

     
     
     
    Thanks of course to these awesome contributors:
     
    SLAMT1LT: created the original Ultimate Pro 1.02 table
    TerryRed: BIG BLOODY MIKE mod, PinEvent V2, FizX
     
    Schlabber34: insert jewel images
    FLEEP: mechanical sounds
    JLou: FizX and support
    ravarcade: BAM and support
    Nailbuster: Pinup Player, PUP DMD, PUP SSF
    Chris Leathley: Future Pinball
     
     
    DISCLAIMER:
     
    This table is a fan-made work of passion, and is NOT intended for commercial usage or to be included in any part of a commercial sale!
     
    ====================================================================
    This table is single player only.
    ====================================================================
     
    Desktop Static Camera Views (attract mode)
     
    during attract mode only, you can press plunger to toggle integrated static desktop camera views
    if you want to use your own BAM camera settings, or a FP camera view, then you must disable this feature in TABLE OPTIONS in the table script
     
    During Attract, the flipper buttons will toggle between Pumpkin Ball and Chrome Ball
     
     
    ====================================================================
     
     
    BAM Ray Cast Ball Shadows:
     
    this table was created to look best with the new BAM Ray Cast Ball shadows this feature is ENABLED on the table script by default this feature requires a fast video card, and will use much more of your GPU if the table doesn’t run smooth, then your PC may not be fast enough to handle this feature (and you should disable it)  
    To disable this feature, you MUST “first” disable it in TABLE OPTIONS (in the table script)
     

    BAM Menu - Light and Post Processing settings:
     
    BAM Lighting and Post Processing settings are set by the table script and will ALWAYS override the user's settings this is required to ensure that all lighting is set correctly at all times on this table, you can make changes to the Ambient and Diffusion Lighting in the table script in TABLE OPTIONS
     
    Physics: FizX v3.3


    ===================================================================


    Game not running smooth? Try the following:
     
    run FP in Fullscreen, not Windowed disable RayCast Ball Shadows in TABLE OPTIONS (in table script) disable Reflections options in FP's Video / Rendering settings reduce / disable Antialiasing in FP's Video / Rendering settings disable any SSAO options in BAM plugins menu (disabled by default)  

    ====================================================================


    TABLE REQUIREMENTS (very important!)
     
    all Visual C Runtime updates DirectX Future Pinball the latest BAM update FuturePinball.exe and FPLoader.exe patched for 4 GB access BAM Settings files installed FizX 1K ball model (for more accurate physics, default.zip in BAM folder) the REQUIRED “Video / Rendering Options” and “Editor Options” in Future Pinball video settings
     
    All of the above is included with the latest FP and BAM Essentials AIO package!

    Super easy to use for a new install, or just to update your existing install. I recommend everyone install this package to ensure you have the latest required BAM updates.
     
    https://vpuniverse.com/files/file/14807-future-pinball-and-bam-essentials-all-in-one-complete/


    ====================================================================


    INSTALL INSTRUCTIONS (REQUIRED)
     
    PLEASE read the Install Instructions (included with the table's zip file) it shows you how to check what version of BAM you have installed it shows you how to install all the REQUIRED items above it shows you how to easily setup FP and BAM with the REQUIRED settings It's super easy, and only takes minutes to do!

    ====================================================================
     

    How to run Future Pinball to play the table
     
    PLEASE read the Install Instructions (included with the table's zip file) to know how to properly use FP and BAM
     

    ====================================================================


    PROBLEMS?
     
    Read the Install Instructions included in the table's zip file. It tells you everything you need to know!


    ====================================================================


    Table MODS
     
    please read the Disclaimer in the Install Instructions included with the table please ask me first, as I am still updating this table  

    ====================================================================

    8819 downloads

       (22 reviews)

    81 comments

    Updated

  24. Dead Pool SE

    This is a complete rework of my original table. I have updated and fix a lot of features including videos, music, sounds, scoring, and lights. I have not completed the table yet, still no Sauron or Mr. Sinister battle yet. Everything else is working as well as I could get it. To see the rule set I was using go over to:
    http://tiltforums.com/t/deadpool-rulesheet/4311#heading--items Requires Latest version on BAM to function correctly. Also recommend the 4g update that Terry Reds calls out for some of his table (Just less crashing).

    1679 downloads

       (3 reviews)

    7 comments

    Updated

  25. " Reserve " ( Williams 1961 ) CAB

    Reserve / IPD No. 1953 / October 02, 1961 / 1 Player
    Manufacturer:Williams Electronic Manufacturing Corporation (1958-1967) [Trade Name: Williams]
    Date Of Manufacture:October 02, 1961
    Model Number:253
    Type:Electro-mechanical (EM) 
    Production:750 units   (confirmed)
    Serial Number Database:View at The Internet Pinball Serial Number Database (IPSND.net)  (External site)
    Theme:Boats - Nautical - Scuba Diving - Water
    Notable Features:Flippers (2), Pop bumpers (3), Passive bumpers (2), Slingshots (2), Standup targets (4), Kick-out holes (2), Gobble hole (1).

    Maximum displayed point score is 1,999 points.

    Sound: 2 bells, knocker.
    Design by:Steve Kordek
    Art by:George Molentin

    148 downloads

       (0 reviews)

    5 comments

    Submitted


×
  • Create New...